• 한국과학교육학회지
• /
• 제1권1호
• /
• pp.73-88
• /
• 1978

The survey is intended to improve science education by the analysis of problems produced in the following nine aspects (objectives, contents, materials, inquring methods, teaching methods, teachers, children, evalutions, admininative supports) during the past five years often the revision of new science curriculum. 1. View for science education. 1) The teacher's and children's view for science education can be seen renewed, being different from the old one. 2) Inquring method in learning and teaching began to take firm root and children came to know that it is the only way to study science. 3) Writers think that the new science education has stepped into the stage of being fixed to a considerable degree. 2. The aspect of administrative policy. 1) The amount of materials in possession is small and the present materials are lacking in solidity and precision. 2) Class room teacher's over load with miscellaneous things is a difficult problem to solve. 3) The shortage of the printed materials and books for children and teachers has an influence on the development of inquring method. 4) It causes cramming to examine all children at the same time by paper test. 5) It is more desirable to appoint qualified teacher only for science teaching. 3. Contents of science curriculum. 1) In current science textbooks. There can be found some contents which are difficult for teachers to understand and not in accordance with the reality of Korea. Therefore, it is imperative that contents of science textbooks should be reexamined. 2) As it is hard to teach concepts of reciprocal action and to prepare materials with teaching of the system of biological concepts, the teaching of contents is likely to be a cramming. 4. The aspect of in-service education. 1) It is obsolutely predominant reation that in-service education is making a great contribution to class room teaching. 2) As adiministrators' policy for science education has a great effect, in-service education for their enlightenment is needed.

• Journal of Periodontal and Implant Science
• /
• 제34권4호
• /
• pp.711-722
• /
• 2004

The purpose of this study is to evaluate the regenerated bone histollogically using titanium reinforced ePTFE(TR-ePTFE) membrane and to investigate cell occlusiveness, wound stabilization and tissue integration of TR-ePTFE membrane. Adult male rabbits (mean BW 2kg) and TR9W (W.L.Gore&Associate.INC,USA) were used in this study. Intramarrow penetration defects were surgically created with round carbide bur(HP long #6) on calvaria of rabbits. TR-ePTFE membrane was applied to defect. Then guided bone regeneration was carried out using TR-ePTFE membrane and resorbable suture. At 2,4,8,12 weeks after the surgery, animals were sacrificed. Nondecalcified specimens were processed for histologic analysis. The result and conclusion of this study were as follows: 1. TR-ePTFE membrane had good ability of biocompatibility and cell occlusiveness. 2. space making for guided bone regenerayion was good at TR-ePTFE membrane. 3. Tissue integration was not good at TR-ePTFE membrane. So, wound stabilization was not good. 4. At 8 weeks, 12 weeks after GBR procedure, bone formation was seen. From the above results, TR-ePTFE membrane fixed tightiy on alveolar bone might be recommended for the early bone formation.

• 한국수소및신에너지학회논문집
• /
• 제19권3호
• /
• pp.199-208
• /
• 2008

HI decomposition was conducted using Pt/C-based catalysts with a fixed-bed reactor in the range of 573 K to 773 K. To examine the change of the characteristic properties of the catalysts, $N_2$ adsorption analyser, a X-ray diffractometer(XRD), and a scanning electron microscopy(SEM) were used before and after the HI decomposition reaction. the effect of Pt loading on HI decomposition was investigated by $CO_2$-TPD. HI conversion of all catalysts increased as decomposition temperature increased. The XRD analysis showed that the sizes of platinum particle became larger and agglomerated into a lump during the reaction. From $CO_2$-TPD, it can be concluded that the cause for the increase in catalytic activity may be attributed to the basic sites of catalyst surface. The results of both b desorption and gasification reaction showed the restriction on the use of Pt/C-based catalyst.

• 치과방사선
• /
• 제19권1호
• /
• pp.39-48
• /
• 1989

Six to eight-month-old female albino rats were used as experimental animals. As an irradiation equipment, a Co-60 was used. The experimental animals were divided to; 6 of the control group, 12 of the 500cGy single irradiation group, 12 of the 1000cGy fractionated irradiation group, and 12 of the 1500cGy fractionated irradiation group. From the first week to the forth, 3 rats were picked from each group every week to be sacrificed and fixed with formalin. Those rats were observed by means of H-E stain after being taken radiograph and decalcified. The analysis of radiographic findings and light microscopic findings gives results as follows: 1. The delay of dental eruption rate was found in every group which underwent the irradiation experiment. Dentin niche, osteodentin, and dentin island were formed in the parts which were damaged by the irradiation. 2. The longer the observation period was, the more deposit of osteodentin and dentin island was formed. 3. In the single irradiation group, the damage effect was in proportion to the increase of radiation dose, whereas the damage was much less in the fractionated group receiving the same dose. 4. The 500cGy single irradiation group got temporary repairable damage, while the 1000cGy single irradiation group got considerable damage and showed much slower eruption rate than the 500cGy single irradiation group. The basal portion of the 1500cGy single irradiation group, whose growth was arrested, was destroyed. 5. The fractionated group were irradiated 500cGy everyweek. Repair was visible during the interval periods. The damage was accumulated as irradiation repeated, but degree of damage was lower than that of the 1000cGy and 1500cGy single irradiation group.

• 대한기계학회논문집B
• /
• 제21권11호
• /
• pp.1485-1495
• /
• 1997

The present study investigates heat/mass transfer around film cooling jets and circular cylinders to compare the characteristics of each other. Experiments are conducted to obtain the detailed heat/mass transfer coefficients of flat plate with injections through an array of holes and for flows around an array of protruding circular cylinders using the naphthalene sublimation technique. The inclination angles of cylinders are set to the same ones of jets; a, the angle between the jet and the surface is fixed at 30 deg. through the whole experiments and .betha., the angle between the projection of the jet on the surface and the direction of main stream is adjusted to 0 deg., 45 deg. and 90 deg. to investigate the effect of variation of injection angles. The influence of blowing rates of jets and those of cylinder length to diameter ratios are also investigated. The results indicate that the increase of angle .betha. influences the spanwise uniformity of heat/mass transfer remarkably for both jets and cylinders, but that variation of cylinder length to diameter ratios has weaker effects on heat/mass transfer coefficients than that of blowing rates.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.57-60
• /
• 2003

IEEE 802.16 Wireless MAN standard specifies the air interface of fixed point-to-multipoint broadband wireless access systems providing multiple service. Among the service classes supported by the wireless MAN, the BE class is ranked on the lowest position in priority and is usually deployed by multicast and broadcast polling MAC scheme. In provisioning such BE service, the delay performance is influenced by a number of components including restrictions on resource request per SS, the number of request opportunities in upward frame, scheduling requests at BS, and contention resolution method. As candidate components of MAC function for BE service, we propose single and multiple request schemes (for controling the number of requests per SS), exhaustive and limited request schemes (for regulating the amount of grant per request) and FCFS, H-SMF, pure SMF, SS-wise Round Robin, and pure Round Robin (for scheduling requests at BS). Then, we construct MAC schemes by combining the above components and evaluate the delay performance exhibited by each MAC scheme using a simulation method. From numerical results, we investigate the effect of MAC components on average delay and delay variation and observe the dissonance on collision reduction in a resource - limited environment.

• 대한전자공학회논문지SD
• /
• 제39권6호
• /
• pp.59-68
• /
• 2002

본 논문에서는 블록 효과(blocking effect)가 없고, 압축성능 또한 높아 영상압축을 포함한 여러 응용 분야에서 널리 사용되고 있는 2차원 이산 웨이블렛 변환(DWT, Discrete Wavelet Transform) 필터를 설계하였다. 필터로는 4개의 필터 탭을 갖는 Two-channel QMF(Quadrature Mirror Filter) PR(Perfect Reconstruction) Lattice 필터를 사용하였다. 제안된 DWT 아키텍쳐는 단순하지만 효과적인 스케줄링 기법을 이용하여 설계되어 최소의 하드웨어(곱셈기, 덧셈기, 레지스터 등)로 구성되었고, 이 아키텍쳐에 두 개의 연속적인 입력이 동시에 제공되면 효율적으로 2차원 DWT를 수행함을 보였다. 제안된 아키텍쳐는 RTL 레벨 시뮬레이션을 통해 검증되었고, 100% 하드웨어 이용도(utilization)를 나타낸다. 다른 연구 결과들과 비교하였을 때 최소의 하드웨어를 사용하여 상대적으로 높은 수행능력을 보였다. 효과적인 메모리 매핑 방법과 그를 위한 주소 발생 방법이 제안되었으며, 고정 소수점 연산 시에 발생하는 에러를 분석하여 적절한 양자화 비트를 결정하기 위한 다양한 시뮬레이션과 성능이 분석되었다.

• 한국의류산업학회지
• /
• 제15권2호
• /
• pp.231-239
• /
• 2013

This research developed a smart girdle for adult women in their 20's that has an inserted carbon weaving heater to help with relief from coldness and abdominal disease through the thermal insulation effect. A pocket of powernet fabric was attached to the inside of the girdle for the easy insertion and separation of the heating device, while the heating device was fixed to a mesh material by cotton yarn and was wrapped with elastic lining material to prevent the mechanical devices from being exposed. A set of 3 hooks was attached to the center of the back of the heating device in consideration of convenience and mobility. Whereas the switch was inserted into around the right waistband, and the battery into the inner pocket around the waist, to integrate the heating device with the girdle. The satisfaction and usability of the fabricated smart girdle was verified by having research participants wear it to evaluate the appearance change caused by the device, the inconvenience of wearing/unwearing, mobility, and the satisfactory functionality of the device. As a result, the grand mean was evaluated to be high, with appearance (4.19), mobility (4.17), and functionality (4.51) being higher than 4.00; which indicates that the heat generation function of the smart girdle is effective. It may be said that such collection and analysis of data that reflect users' opinions have value and significance in that they can be grafted onto future research on new technology as well as they contribute to taking a step forward in the rapidly increasing research of smart clothing, with the new-type clothing equipped with new function.

• 한국응용과학기술학회지
• /
• 제24권4호
• /
• pp.319-331
• /
• 2007

The aim of this study is to enhance the flame retardancy by the synergism effect of phosphorus and bromine groups. The flame-retardant polyurethane coatings containing phosphorus and bromine compounds were synthesized. After synthesizing the intermediate products of tetramethylene bis(orthophosphate) (TBOP) and trimethylolpropane/2,3-dibromopropionic acid (2,3-DBP) [2,3-DBP-adduct], the condensation polymerization was performed with four different monomers of two intermediate products, 1,4-butanediol, and adipic acid to obtain four-components copolymer. In the condensation polymerization, the content of phosphorus was fixed to be 2wt%, and the content of 2,3-DBP that provides bromine component was varied to be 10, 20, and 30wt%, and we designated the prepared modified polyesters containing phosphorus and bromine as DTBA-10C, -20C, -30C. Average molecular weight and polydispersity index of the preparation of DTBAs were decreased with increasing 2,3-DBP content because of increase of hydroxyl group that retards reaction. We found that the thermal stability of the prepared DTBAs increased with bromine content at high temperature.

• 대한기계학회논문집
• /
• 제16권9호
• /
• pp.1700-1710
• /
• 1992

본 연구에서는 경계요소법에 의해 천이상태 열전도문제를 해석하는 프로그램 과 Sladek등이 제안한 열탄성 경계적분방정식을 기초로 하여 열탄성문제를 해석하는 프로그램을 개발하여, 유한체 내에 존재하는 Griffith 균열에 대해 정상 및 천이상태 에서 계산한 열응력세기계수와 유한체 내에 존재하는 대칭 입술형 커스프균열(symme- tric lip cusp crack)에 대해 정상상태에서 열응력세기계수를 계산한다. 그 결과를 기존의 해와 비교하여 프로그램의 타당성을 입증한다. 그후 대칭 입술형 커스프균열 에 대한 천이상태에서의 열응력세기계수를 계산하고자 한다.