• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.3 s.106
• /
• pp.307-316
• /
• 2006

In this paper the analytical method, namely advanced minimum coupling loss(A-MCL), was proposed in order to analyze the coexistence of OFDM-based systems beyond 3G(B3G) with point-to point(PP) fixed service(FS) microwave systems. Our proposed method is based on a power spectral density(PSD) analysis. So it can be easily applicable to analyze the coexistence of OFDM-based systems B3G using flexible spectrum usage(FSU) with other systems, where the conventional MCL method cannot allocate transmit power partially to some subcarriers which overlap the band of a victim system. By applying the conventional MCL method and the A-MCL method, interfering power levels at the receiver of a interfered system are respectively calculated. A-MCL can calculate interference power more accurately than MCL by the maximum value of 4.5 dB. Therefore it can be concluded that our prosed method, namely A-MCL, is applicable to a sharing analysis of OFDM-based systems B3G.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.1
• /
• pp.49-53
• /
• 2007

The direct methanol fuel cell (DMFC) is a promising power source for portable applications due to many advantages such as simple construction, compact design, high energy density, and relatively high energy-conversion efficiency. In this work, an electrochemical methanol sensor for monitoring the methanol concentration in direct methanol fuel cells was fabricated using a thin composite nafion membrane as the electrolyte. We have analyzed the I-V characteristic of the fabricated methanol sensor as a function of methanol concentration, catalyst electrode and platinum(Pt) thickness. The fabricated sensor was analyzed by I-V measurement with various methanol concentration. When we measured the sensor characteristics with 10nm Pt and at 1V, the current value was $1.30{\times}10^{-6}A,\;1.96{\times}10^{-6}A\;and\;2.80{\times}10^{-6} A$ for three methanol concentration of 1M, 2M and 3M, respectively. When the methanol concentration was fixed at 2M, the current value of the fabricated device with Pt layers of 5, 10 and 15 nm thickness was $3.06{\times}10^{-6}A,\;1.96{\times}10^{-6}A\;and\;1.00{\times}10^{-6}A$, respectively. These results lead us to the conclusion that when the methanol concentration increases, the output current increases and when the catalyst electrode become thinner, the current increase more. It showed that, the thinner the catalyst electrode, the more electrochemistry become activation.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.423-435
• /
• 1995

The purpose of this study was to observe the effect of TGF-βl, which promotes differentiation and proliferation of osteoblasts, on bone regeneration. Experimental bone defects that measured 3 mm in diameter were created on the mandibles of guinea pig by removal of bone with the use of trephine burs. In one side of mandibular body, the experimental groups, bone defects were grafted with Biogran(Orthovita Co., U.S.A) and TGF-β1(R&D System Co., U.SA). In the remaining side of the mandiblar body, the control groups, bone defects were grafted with only Biogran. Guinea pigs in the control and experimental groups were serially terminated by fours on the 3 days, the 1 week, the 2 weeks, the 3 weeks, and the 4 weeks after experiment, and both sides of the mandibular bodies were removed and fixed with 10％ neutral formalin. They were decalcified and embedded in paraffin as using the usual method. The specimen sectioned and stained with hematoxylin and eosin. Also, they were radiographed with a soft X -ray apparatus. The obtained results were as follows; 1. Hemorrhagic condition, observed in the granulation tissues, disappeared on the 1 week after experiment in both groups, and more prominent in the experimental group. The granulation tissues of the experimental group had larger number of cells than those of the control group. 2. Osteoblastic differentiation in the margin of grafted material and adjacent bone was observed on the 1 week after experiment in both groups. Also, bone formation was observed in immature form on the 1 week after experiment. and more prominent in the experimental group. 3. In the polarizing microscopic examination, bone matrix was very loose on the 1 week after experiment, but increase in density with time, and more prominent in the experimental group. 4. In the microradiographic examination, newly formed bone was observed in the experimental group on the 2 weeks after experiment, and this was observed earlier than in the control group. Newly formed bone was increased with time and defected area was markedly decreased on the 4 weeks after experiment.

• Asian Journal of Turfgrass Science
• /
• v.15 no.4
• /
• pp.157-168
• /
• 2001

This study was carried out to investigate the offsets of pyroligneous acid on the growth of ‘Penncross’Creeping Bentgrass (Agrostis palustris Huds.) and to propose the practical use for ecologically responsive management in Korean golf courses. In the plots affected by 300, 500, and 800 times diluted pyroligneous acid, the turfgrass growth increment and the visual quality were measured at fixed periods. The data were subjected to paired samples T-test. The results summarized are as follows； 1) In leaf growth increment, density, and root spread depth, turfgrass affected by 500 and 800 times diluted pyroligneous acid were superior to the control continually. It was reliable in the statistics. Especially, 500 times diluted solutions was superior to the others. 2) In color, texture, uniformity, and recuperative strength, the visual quality of turfgrass affected by 500 and 800 times diluted pyroligneous acid were superior to the control continually. It was reliable in the statistics except the recuperative strength. Espe-cially, 500 times diluted solutions tended to be superior to the others. 3) There was no symptom of a disease in all plots. The existing management was thought to be suitable in this golf course. 500 and 800 times diluted pyroligneous acid were not thought to trigger or promote a disease, 4) After investigating the effect of pyroligneous acid on turfgrass growth, the soils of all plots were analyzed. In all plots, the chemical properties of the soils were not changed obviously. 5) Considering the results mentioned above, the practical use of 500 and 800 times diluted solutions might decrease the amount of nutrients and agricultural chemicals used in golf courses as well as promote turfgrass growth in golf courses.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5C
• /
• pp.413-421
• /
• 2008

The paper derives asymptotic formulas for the MSE distortion and the signal-to-noise ratio of a mismatched fixed-rate minimum MSE Laplacian quantizer. These closed-form formulas are expressed in terms of the number N of quantization points, the mean displacement $\mu$, and the ratio $\rho$ of the standard deviation of the source to that for which the quantizer is optimally designed. Numerical results show that the principal formula is accurate in that, for rate R=$log_2N{\geq}6$, it predicts signal-to-noise ratios within 1% of the true values for a wide range of $\mu$, and $\rho$. The new findings herein include the fact that, for heavy variance mismatch of ${\rho}>3/2$, the signal-to-noise ratio increases at the rate of $9/\rho$ dB/bit, which is slower than the usual 6 dB/bit, and the fact that an optimal uniform quantizer, though optimally designed, is slightly more than critically mismatched to the source. It is also found that signal-to-noise ratio loss due to $\mu$ is moderate. The derived formulas can be useful in quantization of speech or music signals, which are modeled well as Laplacian sources and have changing short-term variances.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.1
• /
• pp.63-68
• /
• 2010

CNT and permalloy composite plating was investigated. CNTs were pretreated prior to electroplating to disassemble the tangled CNT lumps. The ball milling as a physical pretreatment and the acid treatment as a chemical pretreatment were used. 10M nitric acid and 10 M sulfuric acid were used for the chemical pretreatment. Sulfuric acid was more effective than nitric acid to disassemble CNT lumps. To disperse CNT in the solution, surfactants were used. SDS, Triton X-100 and PAA were used for this purpose. More CNTs were incorporated in permalloy coating when PAA was used as a surfactant. The surface morphologies were observed with FESEM after electroplating CNT and permalloy. The current densities were varied from 10 to $80\;mA/cm^2$ and the concentration of PAA was fixed at 2 g/L. The optimum current density without surface cracks was $20\;mA/cm^2$. The crystallinity of the deposit was analyzed with XRD and the surface hardness was analyzed with Vicker's hardness tester. The corrosion behavior was analyzed with polarization plot. The physical properties of permalloy were not improved with CNT composite plating.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.263-268
• /
• 2016

A rapid increase of data amount, used in ship-to-ship transmission of safety and logistics information, ships in the inland sea have trouble transmitting real-time information transmission due to an increase in traffic load caused by data transmitted by land station and offshore ships. In this study, therefore, communication is carried out by adaptively controlling the detailed beam width based on the distribution of offshore ships in land station durable in marine environment. Then after the adaptive sector system enabling real-time communication support between ships concentrated in an inland sea and land station is applied, the performance verification is conducted based on the respective Call Blocking Rates of an omnidirectional antenna, fisted sector system, and adaptive sector system. The performance verification result shows that adaptive sector system has better performance than the fixed sector system as the density of ship, q value, increases, and that the smaller the beam width is, the better performance of adaptive sector system will be.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.470-477
• /
• 2013

The aim of this study is to suggest a detection method of water surface location and its evaluation results of application for same vertical position in two successive images with time interval including both staff gauge and water surface. A specific rectangular inspection area is defined from the top of watermark and then the correlation coefficients for the inspection area of the same position of two images with short time interval is calculated. Accordingly, it is possible to identify differences between changing area and fixed area of pixel density by the water flow. The photographs taken in the laboratory were analyzed in order to validate the proposed technique. As the result of the experiment, it is identified that characteristic of correlation coefficients depends on the size of the inspection area. In the case that the inspection area is within the entire width of the watermark, water surface characteristic according to correlation coefficients is clearly noticeable. Thus, it is identified that the proposed technique can be utilized to search water surfaces. Besides, using corelation analysis of two images with time interval, it is identified that error range between 10 and 42cm was reduced in the level of 2.6cm or less in the contaminated photo of existing image stage gauge. Therefore, it is expected that the suggested method can be utilized to enhance image stage gauge performance improving the previous water surface detection method.

• Journal of Life Science
• /
• v.12 no.3
• /
• pp.250-255
• /
• 2002

Fluorescent species-specific DNA probe (AT1) of toxic dinoflagellate Arexandrium tamarense was tested on several other species, on comparison of binding activity at different preservatives for fixation of the cells, at different culture age and estimation of cell density by light microscope or epifluorescent microscope using whole cell hybridization. Th AT1 probe specifically bound to Alexandrium tamarense, whereas it did not bind to other phytoplankton, in particular Alexandrium catenella, morphologically similar to Alexandrium tamarense, could not react to AT1 probe. When cells were fixed with all three preservatives, labeling cells of Alexandrium tamarense emitted strong fluorescent signal intensity. In addition, regardless culture days, binding activity with AT1 probe was strong. The tell densities estimated by epifluorescent microscope were than those estimated by light microscope. The enumeration and identifying of Arexandriurn tamarense using DNA probe method will be contributed to a new biotoxin monitoring and prediction system in field.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.4
• /
• pp.508-515
• /
• 1998

An antihypercholesterolemic effect was observed by intraperitoneal injection of the seaweed Porphya yezoensis extract. Hypercholesterolemia was induced by intraperitoneal injection of Triton WR-1339 (600 $\mu$g/g-body weight) into a mouse. Maximum level of blood cholesterol was reached at 20 hours after Triton injection. By simultaneous injection of the p. yezoensis extract (30 $\mu$g/g-body weight) with the Triton into each right and left sides of the peritoneal cavity, levels of total cholesterol and low density lipoprotein were decreased to $37\%$ and $24\%$ compared to Triton injection only. For histochemical changes, hepatic tissues obtained at 40 hours after injection of the Triton and the p. yezoensis extract were fixed in fromol-calcium solution. Numbers of lipid drops and cholesterol particles decreased in the portal space of the hepatic cytoplasm. This indicates that the accumulation of lipid, including cholesterol, caused by Triton was prevented by the antihypercholesterolemic effect of extract from the seaweed p. yezoensis.