• 대한수학회논문집
• /
• 제20권4호
• /
• pp.813-826
• /
• 2005

Regarding all particles at a fixed site as a cluster, the size of the largest cluster under the zero range invariant measures is well studied by Jeon et al.[5] for the case of density one. Here, the density of the finite zero-range process is given by the ratio between the number m of particles and the number n of sites. In this paper, we study the lower density case, i.e., the case m = o(n). Especially, when m ~ $n^{\beta}$,0 < ${\beta}$ < 1, we show that there is an interesting cutoff point around $\beta$ = 1/2.

• 전자공학회논문지
• /
• 제50권2호
• /
• pp.104-113
• /
• 2013

60GHz 멀티-기가비트 WPAN 시스템을 위한 고속 QC-LDPC 복호기의 구조를 제안한다. 제안한 QC-LDPC 복호기 설계를 위하여 4 블록-병렬 계층 복호 기술과 fixed wire network 기술이 적용 되었다. 2단 파이프라이닝과 4 블록-병렬 계층 복호기술은 동작 주파수와 데이터 처리량을 개선시키는데에 큰 효과가 있다. 또한 본 제안한 복호기 구조에서 스위치 네트워크를 구현하여 위하여 fixed wire network로 간단하게 구현될 수 있으면 하드웨어 복잡도를 크게 감소시킬 수 있다. 제안한 672-비트, rate-1/2인 QC-LDPC 복호기 구조는 90-nm CMOS 표준 셀을 이용해 설계 및 합성하였다. 성능 분석 결과 제안한 QC-LDPC 복호기 구조는 794K 게이트를 가지며 클락 속도 290MHz 에서 작동한다. 12-iteration일 때 데이터 처리율은 3.9 Gbps 이며 60GHz WPAN 시스템에 적용되어 사용 될 수 있다.

• 대한조선학회지
• /
• 제25권2호
• /
• pp.1-10
• /
• 1988

An axially marching numerical method is developed for the simulation of the internal waves produced by translation of a submersed vehicle in a density-stratified ocean. The method provides for the direct solution of the primitive variables [$\upsilon,\;p,\;\rho$] for the nonlinear and steady state three-dimensional Euler's equation with a non-constant density term in the vehicle-fixed cartesian co-ordinate system. By utilizing a known potential flow around the vehicle for an estimate of the axial velocity gradient, the present parabolic algorithm local upstreamwise disturbances and axial velocity variation.

• Membrane and Water Treatment
• /
• 제11권3호
• /
• pp.217-222
• /
• 2020

An electrochemical oxidation process was applied to remove cyanide (CN^-) from real plating wastewater. CN^- removal efficiencies were investigated under various operating factors: current density and electrolyte concentration. Electrolyte concentration positively affected the removal of both CN^- and Chemical Oxygen Demand (COD). As the electrolyte concentration increased from 302 to 2,077 mg Cl^-/L, removal efficiency of CN^- and COD increased from 49.07% to 98.30% and from 23.53% to 49.50%, respectively, at 10 mA/㎠. Current density affected the removal efficiency in a different way. As current density increased at a fixed electrolyte concentration, CN^- removal efficiency increased while COD removal efficiency decreased, this is probably due to lowered current efficiency caused by water electrolysis.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.45-46
• /
• 2023

CLC is used as a filling material for many buildings, and according to energy saving design standards, CLC also requires insulation performance. However, it shows lower insulation performance compared to organic insulation, so additional research is needed. Therefore, in this study, the insulation properties of CLC were analyzed by incorporating EPS beads with high insulation performance into CLC. In this experiment, EPS beads and blast furnace slag were replaced, and W/B was fixed at 33%. The EPS Bead mixing ratio was divided into 5 levels: 0, 0.5, 1.0, 1.5, 2.0 (%), and the experimental items were measured for apparent density and thermal conductivity. As a result of the experiment, the apparent density and thermal conductivity tended to decrease as the mixing ratio of EPS beads increased. It is judged that the density decreased due to the low density and the micropores inside, and the thermal conductivity also decreased.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.17-23
• /
• 2004

In the present work, the numerical model was refined to predict the thermal analysis of energy storage in a fixed beds during (charging ,storing, discharging) mode. The governing energy equations of both fluid and the solid particles along with their initial and boundary conditions are derived using a two-phase, one dimensional model. The refined model is carried out by taking into account change of (air density , air specific heat) with air temperature and also by taking into considerations heat losses from bed to surrounding. Finite difference method was used to obtain solution of two governing energy equations of both fluid and solid particles through a computer program especially constructed for this purpose. The temperature field for the air and the solid are obtained, also efficiency of energy stored inside the bed is computed. Finally using refined model the effect of air flow rate per unit area Ga (0.2, 0.3, and 0.4 kg/$m^2$-s), and inlet air temperature (200, 250, 300 $^{\circ}C$) on energy storage characteristics was studied in three mode ( charging ,storing, discharging). The rock particles of diameter 1 em is used as bed material in this research.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.158-164
• /
• 2004

In the present work, the numerical model was refined to predict the thermal analysis of energy storage in a fixed beds during charging mode. The governing energy equations of both fluid and the solid particles along with their initial and boundary conditions are derived using a two-phase, one dimensional model. The refined model is carried out by taking into account change of (air density , air specific heat) with air temperature and also by taking into considerations heat losses from bed to surrounding. Finite difference method was used to obtain solution of two governing energy equations of both fluid and solid particles through a computer program especially constructed for this purpose. The temperature field for the air and the solid are obtained, also energy stored inside the bed is computed. A comparison between refined model and non refined model is done. Finally using refined model the effect of bed material (Glass, Fine clay ,and aluminum ), and air flow rate per unit area Ga (0.3, 0.4, and 0.5 kg/$m^2$-s) on energy storage characteristics was studied.

• 한국전기전자재료학회논문지
• /
• 제18권4호
• /
• pp.321-326
• /
• 2005

Chemical mechanical polishing(CMP) process is essential technology to be applied to manufacturing the dielectric layer and metal line in semiconductor devices. It has been known that overpolishing in CMP depends on pattern selectivity as a function of density and pitch, and use of fixed abrasive pad(FAP) is one method which can improve the pattern selectivity. Thus, dishing & erosion defects can be reduced. This paper introduces the manufacturing technique of FAP using hydrophilic polymers with swelling characteristic in water and explains the self-conditioning phenomenon. When applied to tungsten blanket wafers, the FAP resulted in appropriate performance in point of uniformity, material selectivity and roughness. Especially, reduced dishing and erosion was observed in CMP of tungsten pattern wafer with the proposed FAP.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.434-436
• /
• 2006

In a visual driver-assistance system, separating moving objects from fixed objects are an important problem to maintain multiple hypothesis for the state. Color and edge-based tracker can often be "distracted" causing them to track the wrong object. Many researchers have dealt with this problem by using multiple features, as it is unlikely that all will be distracted at the same time. In this paper, we improve the accuracy and robustness of real-time tracking by combining a color histogram feature with a brightness of Optical Flow-based feature under a Sequential Monte Carlo framework. And it is also excepted from Tracking as time goes on, reducing density by Adaptive Particles Number in case of the fixed object. This new framework makes two main contributions. The one is about the prediction framework which separating moving objects from fixed objects and the other is about measurement framework to get a information from the visual data under a partial occlusion.

• Structural Engineering and Mechanics
• /
• 제42권2호
• /
• pp.191-210
• /
• 2012

The Force Density Method (FDM) is a well known and extremely versatile tool in form finding of cable nets. In its linear formulation such method makes it possible to find all the possible equilibrium configurations of a net of cables having a certain given connectivity and given boundary conditions on the nodes. Each singular configuration corresponds to an assumed force density distribution. Its improvement as Non-Linear Force Density Method (NLFDM) introduces the possibility of imposing assigned relative distances among the nodes, the tensile level in the elements and/or their initial undeformed length. In this paper an Extended Force Density Method (EFDM) is proposed, which makes it possible to set conditions in terms of given fixed nodal reactions or, in other words, to fix the positions of a certain number of nodes and, at the same time, to impose the intensity of the reaction force. Through such extension, the (EFDM) enables us to deal with form findings problems of cable nets subjected to given constraints and, in particular, with mixed structures, made of cables and struts. The efficiency and the robustness of method are assessed through comparisons with other form finding techniques in dealing with characteristic applications to the prestress design of cable systems. As a further extension, the EFDM is applied to structures having some parts not yet geometrically defined, as can happen in designing new creative forms.