• Journal of the Korean Data and Information Science Society
• /
• 제25권6호
• /
• pp.1207-1219
• /
• 2014

본 연구의 목적은 1) 보험전문가인 보험회사에 근무하는 임직원들이 가지고 있는 채널의 유형, 채널평가 항목, 보험 상품과 보험판매 시 요구되는 채널특성들간의 적합성에 대한 의견을 가지고 생명보험업계와 손해보험업계 각각 2-mode 소셜네트워크 데이터를 구성하고 2) 생명보험업계와 손해보험업계 2-mode 소셜 네트워크 데이터를 1-mode 소셜 네트워크 데이터로 변환하여 생명보험업계와 손해보험업계 두 소셜 네트워크의 구조와 네트워크 특성 변수들을 찾아 비교 분석하고, 소셜 네트워크 기반 측면에서의 생명보험사와 손해보험사의 판매채널 전략의 방향을 제시하고자 한다. 보험 판매채널의 평가에 의한 소셜 네트워크를 비교한 결과, 생명보험업계 소셜 네트워크가 손해보험업계 소셜 네트워크보다 더욱 강한 연결을 보였다. 즉 생명보험업계의 소셜 네트워크의 중심성 변수들이 손해보험업계의 것 들 보다 모두 높게 나타나 생명보험회사들은 채널전략 운영 측면에서 한 방향으로 움직이기가 수월함을 보이는 반면, 손해보험사들은 회사의 규모나 처한 환경에 따라 판매채널 전략이 다를 수 있어 각사의 개별적인 보험 판매 채널전략을 운영해야 함을 의미한다.

• 한국산업보건학회지
• /
• 제31권4호
• /
• pp.540-548
• /
• 2021

Introduction: Preplacement health examination (PHE) is performed when a worker starts a certain work task which is designated as having occupational risks by the Ministry of Employment and Labor (MOEL). All data related to health examination except PHE are reported to the MOEL by the law. This study has been performed to understand the status of PHE at certain workplaces. Methods: PHE data gathered in a university hospital were analyzed and they were followed with results of the special health examination (SHE) in 2019 and 2020. Those who were evaluated as unfit to work as it was, were interviewed directly or indirectly through an occupational health manager to follow up the management status of their recognized health problems. Results: The unfit to work (unFTW) rate of PHE was 2.8%, and was not different according to the size of workplace or having occupational health service. The major cause of unfit to work was the uncontrolled life-style diseases such as hypertension and diabetes. The rate of SHE followed by PHE was 31.1%. It was not different by the unFTW rates, however, they were different according to having a full time in-house occupational health manager. Thirty-one among 71 examinees who were evaluated as unFTW underwent SHE after controlling their health condition and were finally evaluated as fit to work. Nineteen among 31 started to take medicine and eight have been placed in the work without designated risks. Conclusion: PHE can be used for new workers, who may have unknown or uncontrolled life-style diseases, to be asked to manage life-style diseases as well as work-related risks such as shift work. In order to have a better tracking system for work-related risks, the information of PHE should be analyzed together with other data from health examination.

• 복식
• /
• 제65권3호
• /
• pp.151-166
• /
• 2015

This research aims to study the needs of the trail runners as trail running has become a popular outdoor activity, and give suggestions for high functional outdoor menswear design that can satisfy the needs of the highly demanding taste of runners. The design development is as follows: 1) The design had to be made of lightweight material and be easily packable in all situations, and 2) we also considered the ergonomic and compact fit for activity, 3) the functional location of high functional fabric, 4) the reflective use and layering system giving a wide range of outdoor workout time and 5) the trend in 2016 S/S active sports and outdoor wear. Based on the above elements, the men's outdoor wear design has been developed for trail running in spring and summer. The design development includes a total of 7 items. The design focused on lightweight, availability of packaging, "comfortability" and freshness in activity, functional suitability of location of highly functional materials and the layering system to protect body temperature under the changing environment. In particular, the layering system was implemented to provide ventilation, and it was done in body parts that released the most body heat. Therefore, mesh materials were actively used on the side panel, sleeves and center of the back piece for necessary sweat emission without any problems and ventilation for trail running.

• 한국의류학회지
• /
• 제44권4호
• /
• pp.739-748
• /
• 2020

In this study, a wrist protector was manufactured and designed using 3D printing technology to prevent wrist pain when riding a bicycle with a high forward-tilted saddle. The efficiency of the design was analyzed in objective and subjective evaluations. First, seven women in their twenties selected their most preferred design by subjective evaluation from among three 3D wrist protectors. Then electromyography (EMG) was measured and subjective sensations were evaluated while wearing and not wearing the preferred 3D wrist protector as selected by cyclists. Experimental results showed that a wrist-bending angle of 30 degrees was most favored. When the 3D wrist protector was worn, muscle activity was smaller at the flexor carpus radialis position than when the 3D wrist protector was not worn; muscle fatigue was also lower. In the subjective evaluation, the 3D wrist protector was more comfortable than no protector, and wrist fatigue was also lower. In addition, the wrist protector was rated positively for its design suitability, size adequacy, ease of operation, and fit; however, cyclists felt that a little more cushioning was needed.

• 대한가정학회지
• /
• 제46권2호
• /
• pp.73-83
• /
• 2008

The focus of this research was concerned with studying lower body type for Korean adult females. information from the measuring values based on research on the physical standard of the nation(2004) were summarized, in addition a factor of the need for appropriate fit in boots cut jean wear, basic lower body part applying to each item had to be taken into consideration to enhance sizing suitability. The body type are classified into three kinds by means of factor analysis and cluster analysis. Type 1 referred to the fat lower body, having thick rounding waist. compared to other body parts, and long leg according to its proportion. Type 2 represented medium stature but with a large skeleton structure of lower body. Type 3 represented a the long lower body having slender rounding waist. This study was attempted to evaluate the fitness of boots cut jeans pattern for women using 3D Clothes Modeling Software.

• Journal of Information Technology Applications and Management
• /
• 제27권3호
• /
• pp.69-75
• /
• 2020

In this paper, we applied the shape parameters of the exponentialized exponential life distribution widely used in the field of software reliability, and compared the reliability properties of the software using the non-homogeneous Poisson process in finite failure. In addition, the average value function is also a non-decreasing form. In the case of the larger the shape parameter, the smaller the estimated error in predicting the predicted value in comparison with the true value, so it can be regarded as an efficient model in terms of relative accuracy. Also, in the larger the shape parameter, the larger the estimated value of the coefficient of determination, which can be regarded as an efficient model in terms of suitability. So. the larger the shape parameter model can be regarded as an efficient model in terms of goodness-of-fit. In the form of the reliability function, it gradually appears as a non-increasing pattern and the higher the shape parameter, the lower it is as the mission time elapses. Through this study, software operators can use the pattern of mean square error, mean value, and hazard function as a basic guideline for exploring software failures.

• 한국의류산업학회지
• /
• 제17권4호
• /
• pp.597-603
• /
• 2015

This study investigates the actual domestic and overseas cyclewear wearing conditions for male high school cyclists. The study results provide factors and degree of dissatisfaction as basic data for cyclewear development. This study was conducted on 35 male high school cyclists (freshman to seniors) by a questionnaire and interview method. Study results were: Male high school cyclists considered functionality as most important when they bought cyclewear and the brand they most often bought was a cheap domestic brand. Dissatisfaction with the crotch, thigh circumference and minimum leg circumference was higher than other parts during wearing. A cyclist is more sensitive to wear because they require more lower body motion than other parts. Cyclewear should be: less transformed even by frequent laundering, made of breathable material and use a sewing technique that minimizes air resistance and increases fit the body. Functional pads ergonomically designed with high tactile materials should be developed to prevent 'saddle sore' and groin soreness region that happens because of a lower body bending posture when cycling. A follow-up study is recommended to further develop excellence in cyclewear functionality and dimension suitability for male high school cyclists through the size system.

• 한국생활과학회지
• /
• 제12권4호
• /
• pp.571-578
• /
• 2003

The purpose of this research was to provide basic information for enhancing sizing suitability in terms of the need for appropriate fit in head gear. The method for this research was to survey about sizing system of head gear, basic measure part, repair service. The subject of this study were 15 head gear companies. The results of this research were as follows : 1. In the sex target analysis according to company type, most of fashion brand companies were producing woman's head gear. In case of the company to produce man's head gear, sizes appeared variously. On the other hand, the sports brand companies were producing unisex head gear and safety helmet companies were producing man's one. 2. The number of size of head gear manufacturing companies were under 3 sizing system. This means that the sizing system of current head gear manufacturing company isn't various. 3. While the measuring part using currently in the company was head girth, one to be considered necessary for manufacturing of head gear except the head girth was head height.

• 한국의류학회지
• /
• 제26권1호
• /
• pp.50-61
• /
• 2002

The manufacturer first identifies a target market before developing a sizing chart. A target market is specific for age or figure type. The purpose of this study is to evaluate the suitability of sizing system of women's apparel brand in Korea. For this purpose, the characteristics of the manufacture's sizing chart for jacket and skirt/pants were analyzed. For each brand, the target age of the brand and the age of consumers who preferred that bland were compared. The size charts collected from 27 women's apparel brands were analyzed and compared with Korean industrial standard sifting chart. The results of this study reviled that the body proportion in many manufacturer's sizing chart does not correspond to the body types in Korean industrial standard sizing chart. This trend was apparent for the short figure sizes made for women 155cm in height. There is a difference between the target age in brand concept and the age of consumer preferring to purchase that brand apparel. The age of fitting models usually does not correspond the customer's age. It was concluded that the age of target customer does not go well with the age of brand concept nor the fitting model age caused fit problem of the women's ready-made clothes.

• Journal of Welding and Joining
• /
• 제33권6호
• /
• pp.13-20
• /
• 2015

Many automotive companies are endeavoring to improve the quality of resistance spot welding by updating body-in-white (BIW) production line with adaptive control spot welding system to compensate the process disturbances such as gap, electrode wear, oxidized surfaces, poor fit up and adhesive etc. Most of the commercial adaptive weld controllers require proper "Initial Welding Schedule" or "Reference weld" to achieve compensation in welding parameters during real time welding. In this study, the compensation of a commercial adaptive weld controller had been observed and analyzed thoroughly for various process disturbances to find optimal initial welding schedule. It was observed that 90 percent of the expulsion current in constant current control as reference welding schedule conferred the maximum button diameter in adaptive control welding. Finally, effects of each disturbance in combined field disturbances system with adaptive control had also been confirmed with the design of experiment (DOE) by minitab(R)16 for combined disturbances situation and suitability of optimum initial weld current had also established with real body part validation test.