• The Journal of Information Technology
• /
• v.3 no.3
• /
• pp.39-55
• /
• 2000

Internet Trade is the new type of business transaction, which sells and advertises the product and services by using the Internet, which is spreaded rapidly to the world. Under these circumstance, our country should discuss the proper position and role as the center in the trade amount in the world trade market, and face the irresistible changes of trade environment. First, in the institution and legal aspect. Second, the price payment system of the internet trade. Third, the so-called infra construction, the physical sector for activating the internet trade, the comprehensive plan of super-highway information communication net work by the government authorities is expected to be promoted. There is no perfect solution that internet trade could be completely done in front of monitor and will be solved one by one along with the development of electronic commerce. At last, the government's and industry's joint positive concern and participation in the rapidly changing new world trade trends of internet trade is expected fit for our position in the world.

• Food Science and Biotechnology
• /
• v.15 no.4
• /
• pp.572-577
• /
• 2006

The physiochemical interactions of 1-methylcyclopropene (1-MCP) and adsorbing agents can be described using a very powerful tool, inverse gas chromatography (IGC). Sorption behavior of 1-MCP on various adsorbing agents was assessed using the profile peaks of 1-MCP at an infinite dilution concentration using the IGC technique. Chromatogram peaks of 1-MCP adsorption were not observed for the adsorbing agent activated carbon. The forms of sorption isotherms followed Henry's law, and behaved according to the binding site theory. Specific retention volume and distribution coefficients for 1-MCP on the adsorbing agents were determined at 50, 60, 70, and $80^{\circ}C$, respectively. Silica gel had a much higher number of binding sites for 1-MCP compared to Tenax-TA and activated clay agents. Meanwhile, activated carbon proved to be a very strong binding agent for 1-MCP based on 1-MCP efficiency experiments on the selected adsorbing agents. However, as a proper means of delivering 1-MCP molecules to fresh food products, activated carbon is not fit for the binding and release of 1-MCP gas under dry or high humidity conditions because activated carbon has a strong affinity for 1-MCP, even when treated with distilled water.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.3
• /
• pp.477-494
• /
• 2021

This study examined four subjects with close to average body-size values in four stages based on the average BMI value of middle-aged women aged 45 to 59 years. The first experimental pants was developed with two kinds of educational materials pants pattern. After using a clothing-suitability evaluation to identify problems, a pants pattern suitable for the body shape of middle-aged women was developed by modifying and supplementing the initial design. The fit assessment revealed that pattern A had a problem with wrinkles in the hip and thigh areas due to the long crotch length, and pattern B had a short bottom length, which caused the bottom to curl in toward the groin or for the bottom to stick at the hips. The second experimental pants was developed to address these issues and overall satisfaction with the dimensions was higher than for the first educational pattern. The proper front and rear length extensions satisfied movement functionality and appearance requirements, and increasing the gradient of the back centerline-rather than expanding the width of the back crotch-improved the functionality.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.64.1-64.1
• /
• 2013

The point spread function (PSF) of an optical system is in general defined as a two-dimensional intensity distribution which results from a single point source at infinity. It is an important key for the evaluation of the optical performance of an astronomical telescope. The PSFs of the soft X-ray telescope (SXT) aboard Yohkoh were measured in a wide range of the field-of-view under the in-flight configuration at White Sands Missile Range prior to launching the satellite. It has been known that the SXT PSF has a sharp peak at the core and the intensity drops very fast as it goes distant from the center. Due to the combination of this sharp peak at the PSF core and the effect of undersampling by a large pixel size, a carefully designed method is requested in the examination of the PSF data. The pattern of the SXT PSF is determined by the fitting of a mathematical functional form to the pre-launch experimental data. The elliptical Moffat function has been adopted for the evaluation of the SXT PSF. It is revealed from our study that the SXT PSF shows a peculiar characteristics, and thus a careful consideration on the undersampling effect and also a proper choice of statistics are necessary for the determination of the best fit function of the PSF. Details on the on- and off-axis SXT PSF in the field-of-view will be introduced and discussed in our presentation.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.8 no.4
• /
• pp.306-311
• /
• 2008

Fuzzy regression, a nonparametric method, can be quite useful in estimating the relationships among variables where the available data are very limited and imprecise. It can also serve as a sound methodology that can be applied to a variety of management and engineering problems where variables are interacting in an uncertain, qualitative, and fuzzy way. A close examination of the fuzzy regression algorithm reveals that the resulting possibility distribution of fuzzy parameters, which makes this technique attractive in a fuzzy environment, is dependent upon an h parameter value. The h value, which is between 0 and 1, is referred to as the degree of fit of the estimated fuzzy linear model to the given data, and is subjectively selected by a decision maker (DM) as an input to the model. The selection of a proper value of h is important in fuzzy regression, because it determines the range of the posibility ditributions of the fuzzy parameters. In this paper, we discuss the interdependent relationship among the h value, membership function shape, and the spreads of fuzzy parameters in fuzzy linear regression with fuzzy input-output using shape-preserving operations.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.6
• /
• pp.19-26
• /
• 2010

Batch experiments were conducted to investigate growth and nutrient removal performance of microalgae Chlorella vulgaris by using piggery wastewater in different concentration of pollutants and the common growth models (logistic, Gompertz and Richards) were applied to compare microalgal growth parameters. Removal of nitrogen (N) and phosphorus (P) by Chlorella vulgaris showed correlation with biomass increase, implying nutrient uptake coupled with microalgae growth. The higher the levels of suspended solids (SS), COD and ammonia nitrogen were in the wastewater, the worse growth of Chlorella vulgaris was observed, showing the occurrence of growth inhibition in higher concentration of those pollutants. The growth parameters were estimated by non-linear regression of three growth curves for comparative analyses. Determination of growth parameters were more accurate with population as a variable than the logarithm of population in terms of R square. Richards model represented better fit comparing with logistic and Gompertz model. However, Richards model showed some complexity and sensitivity in calculation. In the cases tested, both logistic and Gompertz equation were proper to describe the growth of microalgae on piggery wastewater as well as easy to application.

• Journal of Korea Foundry Society
• /
• v.20 no.5
• /
• pp.330-335
• /
• 2000

Functional metal prototypes are often required in numerous industrial applications. These components are typically needed in the early stage of a project to determine form, fit and function. Recent R/P(Rapid Prototyping) part are made of soft materials such as plastics, wax, paper, these master models cannot be employed durable test in real harsh working environment. Parts by direct metal rapid tooling method, such as laser sintering, by now are hard to get net shape, pores of the green parts of powder casting method must be infiltrated to get proper strength as tool, and new type of 3D direct tooling system combining fabrication welding arc and cutting process is reported. But a system which can build directly 3D parts of high performance functional material as metal park would get long period of system development, massive investment and other serious obstacles, such as patent. In this paper, through the rapid tooling process as silicon rubber molding using R/P master model, and fabricate wax pattern in that silicon rubber mold using vacuum casting method, then we translated the wax patterns to numerous metal tool prototypes by new investment casting process combined conventional investment casting with rapid prototyping & rapid tooling process. With this wax-injection-mold-free investment casting, we developed new investment casting process of fabricating numerous functional metal prototypes from one master model, combined 3-D CAD, R/P and conventional investment casting and tried to expect net shape measuring total dimension shrinkage from R/P pare to metal part.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.160-165
• /
• 2005

The proceeding bearings of marine diesel engine are affected by dynamic loads from the cylinder gas pressure and the inertia force from the crank mechanism. Oil film must support the load of the shaft and it also must protect the proceeding and the bearings from damage. This study uses Goenka's new curve fit to carry out the theoretical analysis of oil film in proceeding bearings for MAN B&W 12K90MC-C and Hyundai Heavy Industry Co., Ltd HiMSEN H21/32 Engine. The applied engine's analysis results show the behavior of the proceedings in main and crank pin bearings. The results of this study will be the proper criteria for the proceeding bearings design and be available for development of the new technology in the proceeding bearing and for the high strength lining coating.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.306-310
• /
• 2008

Fuzzy regression, a nonparametric method, can be quite useful in estimating the relationships among variables where the available data are very limited and imprecise. It can also serve as a sound methodology that can be applied to a variety of management and engineering problems where variables are interacting in an uncertain, qualitative, and fuzzy way. A close examination of the fuzzy regression algorithm reveals that the resulting possibility distribution of fuzzy parameters, which makes this technique attractive in a fuzzy environment, is dependent upon an h parameter value. The h value, which is between 0 and 1, is referred to as the degree of fit of the estimated fuzzy linear model to the given data, and is subjectively selected by a decision maker (DM) as an input to the model. The selection of a proper value of h is important in fuzzy regression, because it determines the range of the posibility ditributions of the fuzzy parameters. In this paper, we discuss the interdependent relationship among the h value, membership function shape, and the spreads of fuzzy parameters in fuzzy linear regression with fuzzy input-output using shape-preserving operations.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.2
• /
• pp.111-117
• /
• 2009

Many colleges in Korea have been making a concentrated effort to develop engineering certification education programs, fit for the certification standards and the reality of each college. However, in reality, many colleges and departments in Korea have great difficulties in making the curriculums meet the engineering certification standards to be proper for the present situation of each college. Therefore, this study aims at suggesting the most general way to make a specialized liberal arts curriculum for the colleges preparing for the engineering certification. When this is applied to the architectural engineering program curriculums of each college, students will be able to take specialized liberal arts subjects which are appropriate for their future careers and aptitudes, and also enterprises will be able to curtail educational expenses for their new employees and hire competent people who combine fundamental personality, basic knowledge about the work, and foreign language proficiency. Furthermore, the nation will be able to secure national competitive power through systematization of engineering education and realistic educational systems.