• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.545-556
• /
• 2021

In this study, we aimed to elucidate the materialistic characteristics of 11 pieces of earthenware belonging to the Neolithic and Bronze Age excavated from Jeongseon Auraji, South Korea. As a result, the chemical composition of earthenwares belonging to the early Bronze Age was distributed in the intermediate area between the Neolithic and Bronze Age earthenwares, but no significant difference was confirmed based on their manufacturing period. Upon comparison, the earthenwares excavated from Jeongseon Auraji site were found to comprise less acidic components than those excavated from Yeongdong, and are characterized by the alkaline components depending on the excavated site. In the rare earth elements distribution pattern, all the analyzed earthenwares exhibited similar pattern, confirming that the raw materials present in the clay were the same. As a result of microstructure analysis, the clay particles and voids were found to be irregularly distributed in the analyzed earthenwares. Neolithic earthenwares exhibited many irregular voids, and an arrangement of aluminosilicate, including feldspar, was observed along with the clay substrate. Furthermore, we confirmed that the empty space in early Bronze Age earthenwares was filled with fine particles and cube crystals. Moreover, the main mineral phase of earthenwares excavated from Jeongseon Auraji exhibited similar composition, and therefore, there was no significant difference in the firing temperature of these earthenwares. The firing temperature of the earthenwares ranged from 750 to 850℃.

• Korean Journal of Materials Research
• /
• v.30 no.10
• /
• pp.550-557
• /
• 2020

Used in the ceramic tile market as a representative building material, relief ceramic tile is showing increased demand recently. Since ceramic tiles are manufactured through a sintering process at over 1,000 ℃ after uniaxial compression molding by loading granule powders into a mold, it is very important to secure the flowability of granular powders in a mold having a relief pattern. In this study, kaolin, silica, and feldspar are used as starting materials to prepare granule powders by a spray dryer process; the surface of the granule powders is subject to hydrophobic treatment with various concentrations of stearic acid. The effect on the flowability of the granular powder according to the change of stearic acid concentration is confirmed by measuring the angle of repose, tap density, and compressibility, and the occurrence of cracks in the green body produced in the mold with the relief pattern is observed. Then, the green body is sintered by a fast firing process, and the water absorption, flexural strength, and durability are evaluated. The surface treatment of the granule powders with stearic acid improves the flowability of the granule powders, leading to a dense microstructure of the sintered body. Finally, the hydrophobic treatment of the granule powders makes it possible to manufacture relief ceramic tiles having a flexural strength of 292 N/cm, a water absorption of 0.91 %, and excellent mechanical durability.

• Journal of Platform Technology
• /
• v.9 no.4
• /
• pp.60-70
• /
• 2021

This paper proposes a method capable of stably tracking the coordinates of a patterned laser image in a curved screen shooting system using two or more channels of multiple cameras. This method can track and acquire target points very effectively when applied to a multi-screen shooting method that can replace the HMD shooting method. Images of curved screens with severe deformation obtained from individual cameras are corrected through image normalization, image binarization, and noise removal. This corrected image is created and applied as an Euclidean space map that is easy to track the firing point based on the matching point. As a result of the experiment, the image coordinates of the pattern laser were stably extracted in the curved screen shooting system, and the error of the target point position of the real-world coordinate position and the broadband Euclidean map was minimized. The reliability of the proposed method was confirmed through the experiment.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.43.1-43.1
• /
• 2010

In the crystalline silicon solar cells, the full area aluminum_back surface field(BSF) is routinely achieved through the screen-printing of aluminum paste and rapid firing. It is widely used in the industrial solar cell because of the simple and cost-effective process to suppress the overall recombination at the back surface. However, it still has limitations such as the relatively higher recombination rate and the low-to-moderate reflectance. In addition, it is difficult to apply it to thinner substrate due to wafer bowing. In the recent years, the dielectric back-passivated cell with local back contacts has been developed and implemented to overcome its disadvantages. Although it is successful to gain a lower value of surface recombination velocity(SRV), the series resistance($R_{series}$) becomes even more important than the conventional solar cell. That is, it is a trade off relationship between the SRV and the $R_{series}$ as a function of the contact size, the contact spacing and the geometry of the opening. Therefore it is essential to find the best compromise between them for the high efficiency solar cell. We have investigated the optimal design for the local back contact by using PC1D simulation.

• Journal of the Korean Ceramic Society
• /
• v.44 no.3 s.298
• /
• pp.157-161
• /
• 2007

Line width under $100\;{\mu}m$ with good resolution is difficult to achieve using conventional thick-film process utilizing screen printing method. However combined with lithography technology finer line and space for miniaturization and highly integrated package is achievable. In this study, photosensitive Ag paste of optimum formulation used for thick film lithography technology was fabricated by various Ag powder, glass powder and additives. As the result, line width of $30\;{\mu}m$ with good definition and reduced mismatch during co-firing with LTCC substrate was acquired. Formulated Ag paste was used to pattern embedded fine line inductor with over 90% yield.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.3
• /
• pp.257-265
• /
• 2012

This paper presents a study on characteristics of precession motion of a smart munition. It's a kind of the Sensor Fuzed Weapon. The particular thing for the smart munition is that it has precession motion in the air while the sensor is searching the ground to detect ground vehicles such as tanks. The smart munition has a cylindrical shape and has a sensor attached on its side. Due to its non-uniform mass distribution, its center of gravity(CG) is located away from the center of volume(CV). In order for the smart munition to detect the target effectively, the ground searching pattern of sensor should have an uniform circular form, and for this, the precession motion of smart munition should be in its steady-state. Finally, it is necessary to choose the right initial conditions at the moment of firing, for the steady-state precession motion during flight.

• Tunnel and Underground Space
• /
• v.20 no.3
• /
• pp.183-193
• /
• 2010

The present paper highlights some important fragmentation issues experienced in the limestone quarry blast rounds. In light of these major issues, the paper outlines influence of a few important design parameters, which bear merit to alter the blast performance in order to duly resolve the issues in field scale blast rounds. A comprehensive field based program for evaluation of such blast rounds has also been suggested. The knowledge disseminated in the paper, backed up by sufficient images, is largely based on the experience of the authors, while designing, implementing and evaluating numerous field scale blast rounds in cement grade limestone quarries.

• Korean Journal of Materials Research
• /
• v.27 no.11
• /
• pp.583-589
• /
• 2017

Ceramic ink-jet printing has become a widespread technology in ceramic tile and ceramicware industries, due to its capability of manufacturing products on demand with various designs. Generally, thermally stable ceramic inks of digital primary colors(cyan, magenta, yellow, black) are required for ink-jet printing of full color image on ceramic tile. Here, we synthesized an aqueous glass-ceramic ink, which is free of Volatile organic compound(VOC) evolution, and investigated its inkjet printability. $CoAl_2O_4$ inorganic pigment and glass frit were dispersed in aqueous solution, and rheological behavior was optimized. The formulated glass-ceramic ink was suitably jetted as single sphere-shaped droplets without satellite drops. After ink-jet printing and firing processes, the printed glass-ceramic ink pattern on glazed ceramic tile was stably maintained without ink spreading phenomena and showed an improved scratch resistance.

• Journal of the Korean Ceramic Society
• /
• v.44 no.1 s.296
• /
• pp.32-36
• /
• 2007

Zinc gallate $(ZnGa_2O_4)$ thin film phosphors have been formed on ITO glass substrates by a sol-gel spinning coating method. For the formation of the film phosphors, the starting materials of zinc acetate dihydrate, gallium nitrate hydrate and 2-methoxyethanol as a solution were used. The thin films deposited were firstly dried at $100^{\circ}C$ and fired at $500^{\circ}C\;or\;600^{\circ}C$ for 30 min and then, annealed $500^{\circ}C\;or\;600^{\circ}C$ at for 30 min under an annealing atmosphere of 3% $H_2/Ar$. The thin films deposited on ITO glass plates showed the (220), (222), (400), (422), (511), and (440) peaks of spinel structure as well as the (311) peak indicating a standard powder diffraction pattern. The surface morphologies of the thin film phosphors were observed with a firing and an annealing condition. The $ZnGa_2O_4$ film phosphors showed the blue emission spectra around 410 nm as well as the emission spectra in the UV region (360-380 nm).

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.255-258
• /
• 2002

Liquid rocket engines using liquefied natural gas (LNG) or methane as a fuel is known to have several good characteristics, such as high specific impulse compared to other hydrocarbon fuels, environment-friendly exhaust gas, low production cost, and re-usability with low soot generation in the cooling channel. In this study, experimental combustion chambers capable of using LNC and $CH_{4}$ are being researched through experimental firing tests, and within easy range of eyes' inspection, there are the periodical existence of soot or discoloration in the chamber wall surface. This result means that mixture ratio of oxidizer and fuel fluctuates periodically between outer-row injectors in the mixing head in the circumferential direction. Therefore, based on this phenomenon, the variation of mixture ratio near the chamber wall caused by the spill pattern of a shear coaxial injector was analyzed quantitatively and the thermal heat flux Into the cooling channel is modified. Then, the calculated and modified results are compared with the measured ones.