• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.807-808
• /
• 2010

• 한국세라믹학회지
• /
• 제24권2호
• /
• pp.161-169
• /
• 1987

An experimental study of the characteristics and the behavior of flames, and the aerodynamic flow pattern was carried out in the present work on a down draft kiln for gas firing. The aim of this work is to establish a behavior of flames and to know the extent to which the flow pattern is affected by the height of baffle plate. The measurements of temperature, concentrations of fuelgas, and kiln pressure were conducted at different temperature in kiln, and at different height of baffle plate. From the obtained results, it was found that the characteristics of thestagnation zone are greatly affected when changing over the height of baffle plate, and the best condition of that was 115m/m.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2003년도 춘계학술논문발표회논문집
• /
• pp.164-170
• /
• 2003

In this paper, we studied on the firing characteristics and electrical fire analysis of power cord deteriorated by thermal stress. The cross section of PVC insulating cord deteriorated by indirect flame decreased through heat convection. PVC insulating cord deteriorated by direct flame was bumpy shape. The exothermic peak of normal cord was shown at ($526.7^{\circ}C$), but the peaks or on(heat treatment temperature) ($150^{\circ}C$) cord was shown at ($299.6^{\circ}C$) and [$502.2^{\circ}C$]. The exothermic peaks according to high temperature were similar to those of amorphous carbon. In the FT-IR analysis, the absorption peak of normal cord indicated double bond of oxygen and carbon in benzene ring at 1720.0$cm^{1}$. As the HTT was high, the height of characteristic peak decreased and the peak of carbonyl group was shown at about 1625.7$cm^{-1}$. The characteristic peak of single bond(O-H) was shown at about 3479.2$cm^{-1}$. In case of the internal part of wire covering deteriorated by over current, the characteristic peak were shown at about 3417.3$cm^{-1}$ and 1600.2$cm^{-1}$. The above results show that we can distinguish the differences according to the fire pattern through the internalㆍexternal analysis of wire covering deteriorated by heat.

• 한국전기전자재료학회논문지
• /
• 제27권4호
• /
• pp.209-216
• /
• 2014

The screen printed technique is one of the electrode forming technologies for crystalline silicon solar cell. It has the advantage that can raise the production efficiency due to simple process. The electrode technology is the core process because the electrode feature is given a substantial factor (for solar cell efficiency). In this paper, we tried to change conditions such as squeegee angle $55{\sim}75^{\circ}$, snap off 0.5~1.75 mm, printing pressure 0.6~0.3 MPa and 1.6~2.0 mm finger spacing. As a result, the screen printing process showed an improved performance with an increased height higher finger height. Optimization of fabrication process has achieved 17.48% efficiency at screen mesh of 1.6 mm finger spacing.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.105-110
• /
• 2010

Supersonic ejectors are simple mechanical components, which generally perform mixing and recompression of two fluid streams. Ejectors have found many applications in engineering. In aerospace engineering, they are used for high altitude testing (HAT) of a propulsion system by reducing the pressure of a test chamber. It is composed of three major sections: a vacuum test chamber, a propulsive nozzle, and a supersonic exhaust diffuser (SED). This paper aims at the improvement in HAT facility by focusing attention on the vertical firing rocket test stand with shock generators. Shock generators are mounted inside the SED for improving the pressure recovery. The results clearly showed that the performance of the ejector-diffuser system was improved with the addition of shock generators. The improvement comes in the form of reduction of the starting pressure ratio and the vertical height of test stand. It is also shown that shock generators are useful in reducing the total pressure loss in the SED.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.200-203
• /
• 2011

Supersonic ejectors are simple mechanical components, which generally perform mixing and recompression of two fluid streams. Ejectors have found many applications in engineering. In aerospace engineering, they are used for high altitude testing (HAT) of a propulsion system by reducing the pressure of a test chamber. It is composed of three major sections: a vacuum test chamber, a propulsive nozzle, and a supersonic exhaust diffuser (SED). This paper aims at the improvement in HAT facility by focusing attention on the vertical firing rocket test stand with shock generators. Shock generators are mounted inside the SED for improving the pressure recovery. The results clearly showed that the performance of the ejector-diffuser system was improved with the addition of shock generators. The improvement comes in the form of reduction of the starting pressure ratio and the vertical height of test stand. It is also shown that shock generators are useful in reducing the total pressure loss in the SED.

• 공업화학
• /
• 제10권4호
• /
• pp.586-591
• /
• 1999

유연탄과 무연탄 및 유, 무연탄의 연소특성을 해석하기 위하여 내경 0.109 m의 유동층반응기에서 회분석 석탄주입에 따른 유동화특성과 연소특성 실험을 수행하였다. 온도변화곡선, 압력요동특성치를 이용하여 회분식유동층에서 유연탄과 무연탄 및 혼합석탄의 연소특성을 측정하였다. 유연탄과 무연탄의 입자크기, 두 석탄의 혼합비, 유동화매질의 입자크기에 따른 영향을 고찰하였다. 유연탄과 무연탄의 혼합연소시 무연탄의 혼합비가 30 %인 경우가 유연탄의 연소속도 및 연소거동이 최적으로 나타났다. 저품위 고회분 무연탄의 경우 유동화특성보다 연소특성에 의한 영향이 더욱 크게 나타났다. 또한 유동층의 유동화 특성에 의하여 연소거동이 변화됨을 알 수있었다.

• Journal of Plant Biology
• /
• 제14권3호
• /
• pp.36-42
• /
• 1971

The effects of irregular burning of vegetation by man were studied in relation to composition and productivity in a non-agricultural montane grassland in the Chongsun area, Kangwon-Do, Korea. The floristic composition in all study area includes 38 species. Three of the stations are dominated by Arundinella hirta and one is dominated by Miscanthus sinensis. The standing crop of the first station, which was fired in early spring, 1970, was 358.7g/$m^2$ to 497.5g/$m^2$; that of the second station, fired in late 1969 was 351. 5g/$m^2$; the third station, fired sometime in 1968, had a standing crop of 314.5g/$m^2$ to 397.1/$m^2$; the fourth station, having had no recent fires, had a standing crop of 370.0g/$m^2$ to 448.0g/$m^2$. The daily productivity shows a maximum of 6.03g/$m^2$ in the first station, and a minimum of 0.85g/$m^2$ in the fourth station. The productivity of grassland in the study area is at a maximum during July and August because of much precipitation, and decreases rapidly in the months to follow. The productive structure of the first and fourth stations is shown in Fig. 2 and 3. At the first station the maximum height attained by the plants was 180cm. In the height range of 50cm to 100cm there was a maximum of assimilative organs (5.6g/0.25$m^2$$\times$10cm), while in the height range below 50cm there was a maximum of non-assimilative organs (13.0g/0.25$m^2$$\times$10cm). At the fourth station, which has not been fired recently, the maximum height reached by the plants was commonly below 100cm. The assimilative organs showed a maximum abundance in the height range of 40cm to 50cm (4.5g/0.25$m^2$$\times$10cm). while the non-assimilative organs showed their greated abundance in the height range below 10cm (6.0g/0.25$m^2$$\times$10cm). There was a direct relationship between daily productivity and organic matter, available phosphorous, exchangeable calcium and potassium. It appears that the nutrients provided by the ash created in the firing of the study can be an important factor in the productivity of these grasslands.

• 청정기술
• /
• 제23권1호
• /
• pp.80-89
• /
• 2017

하수슬러지 고형연료 및 우드펠렛의 전소 및 혼소 실험을 위해 내경 0.1 m, 높이가 1.2 m인 기포 유동층 반응기를 적용하였으며, 장치는 유동층 반응기, 연료 공급장치, 사이클론, 냉각기, 그리고 가스분석기로 구성되었다. 층 물질의 평균입자크기는 $460{\mu}m$이며, 최소 유동화 속도는 $0.21ms^{-1}$이다. 실험에 사용된 연료는 국내산 하수슬러지 고형연료 및 캐나다산 우드펠렛을 적용하였으며, 우드펠렛 기준 혼합율 20, 50, 80%로 고위발열량을 기준으로 산정하였다. 실험 고정변수는 당량비 1.65, 산화제 $100Lmin^{-1}$, 반응기 온도 $800^{\circ}C$, 유동화수 4로 설정하였다. TGA 분석 결과, 하수슬러지의 고형 연료의 연소성이 우드펠렛이 비해 상대적으로 좋지 않았다. 연소시 반응기 온도는 $800{\sim}900^{\circ}C$ 사이로 유지되었으며, 유동층 반응기에서 하수 슬러지 고형연료의 낮은 연소성으로 인해 CO가 상대적으로 높게 측정되었다. 뿐만 아니라 $NO_X$와 $SO_X$는 하수슬러지 고형연료 내의 질소함량으로 인해 우드펠렛에 비해 높게 측정되었으며, 혼소율이 증가될수록 CO, $NO_X$, 그리고 $SO_X$의 배출이 감소하였다. 혼소에 따른 회분의 거동 및 퇴적 경향에서 모든 조건에 대해 슬래깅/파일링의 가능성이 높은 것으로 분석되었다.

• 대한치과기공학회지
• /
• 제31권4호
• /
• pp.15-23
• /
• 2009

The aim of this study was to evaluate the bond strength of using a Au bonding agent applied on cp-Ti and nonprecious metal-gold-ceramic system. Metallic frameworks(diameter: 5mm, height: 20mm)(N=56, n=7per group) cast in Ni-Cr alloy, Co-Cr alloy and cp-Ti were obtained using acrylic templates and airborne particle abraded with $110{\mu}m$ aluminum oxide. Au bonding agent was applied on wash opaque firing as intermediate layer. SEM and SEM/EDS line profile were performed on the cutting the cross-section of the metal substrate-porcelain with intermediate Au coating. Groups were tested using shear bond strength(SBS) testing at 0.5mm/min. The mean SBS values for the ceramic-Au layer-metal combination were significantly higher than those ceramic-metal combination. While ceramic-Au layer-cp-Ti combinations failed to increase bond strength instead of using a titanium bonding porcelain. The appication of using Au intermediate layer significantly improve the bond strength combination with metal-ceramic system.