• Journal of the Korean Wood Science and Technology
• /
• 제12권2호
• /
• pp.3-9
• /
• 1984

This study was carried out to examine the practicality of DAP[$(NH_4)_2HPO_4$] as fire retardant for plywood by static bending test the redried plywoods which had been soaked in 20% $(NH_4)_2HPO_4$ solution. Being hot/cold soaked in the solution for 3/3, 6/3, 9/3 and 12/3 hours and redried by cyclic press-drying method at the platen temp. of 130, 145, 100 and $175^{\circ}C$, the treated plywoods were tested to offer the mechanical data, that is, $S_{pl}$(stress at proportional limit), MOE(modulus of elasticity), MOR(modulus of rupture) and $W_{pl}$(work per unit volume to proportional limit ) in flexure. The results obtained were summarized as follows. 1. $S_{pl}$ of fire retardant treated plywoods ("FRP" would be used hereinafter) decreased as the platen temperature increased, but it was superior to that of non-treated plywoods(Control) at $160^{\circ}C$ or higher. 2. MOE of FRP decreased roughly with the increase of temperature, hut this tendency was not constant. And the value of FRP was higher than that of Control even at $175^{\circ}C$. 3. MOR of FRP showed same temperature-dependent tendency as MOE, but it was influenced more sensitively at the higher temperature. 4. $W_{pl}$ of FRP also decreased gradually with the increase of platen temperature and the value in DAP 9/3 treatment was Jess than 70% of control plywoods. 5. In view of redrying time and mechanical properties, the most reasonable platen temperature for DAP treated FRP was $160^{\circ}C$ in this study.

• Journal of the Korean Wood Science and Technology
• /
• 제14권4호
• /
• pp.21-28
• /
• 1986

Plywood used for construction as a decorative inner material is inflammable and can fire accident, causing destruction of human life and property. In this study, 3.5mm Kapur plywoods were soaked in the 23% monoammonium phosphate solutions by cold soaking method 3, 6, 9hrs and hot-cold bath method for 3/3hrs, and redrying was carried out by press-drying at the platen temperature of 110, 130, 160, 180$^{\circ}C$, and then fire test was carried out to investigate burning point, flame exhausted length, frame spread length, back side carbonized area and weight loss. The results are as follows; 1. In cold soaking method for 3, 6, 9hrs. retentions of monoammonium phosphate were 0.377, 0.448, 0.498kg/(30cm)$^3$ respectively, and in hot-cold bath method for 3/3hrs, the retention was 1.331kg(30cm)$^3$ that exceeded the minimum retention 1.124kg/(30cm)$^3$. 2. Correlation coefficients among the variable were shown in table 2. From the table, it could be recognized that there were close negative correlations between the treatment and burning point, flame spread length, back side carbonized area, flame exhausted time and weight loss, and there was negative correlation between treating time and back side carbonized area, but there was positive correlation between platen temperature and burning point. 3. From table 3, it can be observed that there were highly significant differences for burning point, flame spread length, flame exhausted time, back side carhonized area, weight loss between treatments. And in 2-way interactions, there were also highly significant for burning point, flame spread length, flame exhausted time, weight loss between time x treatment. 4. It was observed that burning point, flame exhausted time, flame spread length, back side carbonized area, and weight loss in fire-retardant treated plywood were the best effects in fire-retardant treated plywood, water treated plywood and nontreated plywood. In conclusion, I can estimate that absorbed chemical contents by hot-cold bath method for 3/3hrs, have a lot of effects on fire-retardant factors such as burning point, flame spread length, flame exhausted time, backside carbonized area and weight loss, but platen temperatures have a little effects on the fire factors.

• Journal of the Korean Wood Science and Technology
• /
• 제39권3호
• /
• pp.244-251
• /
• 2011

본 연구에서는 소나무(Pinus Densiflora)와 잣나무(Pinus Koraensis)에 대한 연소특성을 비교 평가하였다. 두 수종은 한옥의 부재로 널리 사용되고 있으며, 그 체적밀도는 소나무가 잣나무에 비하여 상대적으로 큰 값을 가지고 있다. 목재의 연소특성은 해당 수종의 체적밀도와 밀접한 관계를 갖고 있는데 본 연구에서 방염성능에 있어서는 뚜렷한 차이를 확인하기는 어려웠지만 콘칼로리미터 시험방법에 있어서는 총 방출열량, 평균 열방출률 비교를 통하여 목재 수종의 체적밀도의 상관성을 확인하였다. CO/$CO_2$의 비로부터 알 수 있는 연소가스의 유해성은 난연처리에 의해 높아진 것으로 나타났다.

• 한국연소학회지
• /
• 제22권4호
• /
• pp.1-8
• /
• 2017

This study was conducted to evaluate the fire retardant performance of exfoliated graphite nanoplatelets (xGnP) applied for particleboard. This work measured heat release rate(HRR), total heat release(THR) and smoke production rate(SPR) of xGnP added particleboard, using cone calorimeter to assess its fire characteristics according to the KS F ISO 5660-1 standard code. Heat release rates of all specimens treated by xGnP were less than the $200kW/m^2$ for a total experiment period of five minutes. Heat release rates of the specimens coated with xGnP were lower than those of the specimens made by mixing wood particles with xGnP directly. Meanwhile, the total heat release rates of xGnP coated specimen maintained quite lower level than the uncoated so the xGnP coating were effective in improving the fire retardant performance of particleboard. However, the smoke emission peaking problem at the initial combustion period, which was caused by adding base coating materials, should be resolved for further satisfaction as a fire retardant materials.

• Journal of the Korean Wood Science and Technology
• /
• 제27권3호
• /
• pp.39-50
• /
• 1999

라디에타소나무, 케루잉, 딜레니아, 터미날리아 및 칼로필롬 단판에 내화약제로서 20% 제2인산암모늄 수용액을 상압 침지 및 진공가압침지 처리한 시험을 실시 하였으며, 라디에타소나무와 케루잉 단판의 구성형태와 내화약제의 침지처리 조건들을 여러형태로 조합한 합판을 요소 멜라민 수지와 페놀수지 접착제를 사용하여 제조하였다. 결과, 라디에타소나무가 케루잉보다 약제보유도 및 처리효과가 뛰어났으며, 진공가압침지가 상압침지보다 약제보유면에서는 유효하였다. 그리고, 기계적 성질에 있어 단판첨지법으로 내화처리를 하여 제조한 합판이 반드시 접착력 및 휨강도적 성질의 저하를 가져오지는 않았으며, 내화성에 있어서는 요소 멜라민수지 접착이 우수한 성능을 보였다. 결과적으로, 접착 강도성능과 내화성능을 고려한 단판 수종의 적정한 선택, 층간구성(조합) 및 교호약제처리가 실제 사용시 가능할 것이다.

• 한국화재소방학회논문지
• /
• 제15권3호
• /
• pp.7-13
• /
• 2001

본 연구는 고분자재료 중 방염미처리된 합판, 방염처리된 합판, 경질PVC, 경질우레탄폼의 연소가스 독성평가를 위하여 열분해 온도 $600^{\circ}c$, $800^{\circ}c$, $1000^{\circ}c$에 따라 발생되는 연소가스를 가스텍(GASTEC) 가스검지관(Colorimetric gas detector tubes)을 이용하여 조사하였다. 연구결과 고분자재료의 연소시 발생되는 연소가스에 인간이 30달 동안 노출될 경우 사망에 이르는 독성지수를 갖고 있었으며, 열분해 온도 $800^{\circ}c$에서 독성지수는 경질 PVC가 31.94로 가장 높았다. 또한 열분해 온도에 관계없이 공통적으로 발생되는 연소가스는 이산화탄소($CO_2$)와 일산화탄소(CO)로. 나타났으며, 동일재료라도 열분해 온도에 따라 독성지수(T.I)는 차이가 있었다.

• 한국산림과학회지
• /
• 제64권1호
• /
• pp.26-32
• /
• 1984

본(本) 연구(硏究)는 COMPLY의 core에 사용(使用)되는 파티클보오드를 내수처리(耐火處理)파티클보오드로 사용(使用)하였을 때 COMPLY의 강도적(強度的) 성질(性質)에 미치는 영향(影響)을 규명하고져 실시(實施)하였다. Ammonium sulfate의 경우 COMPLY의 MOR은 약액농도(藥液濃度)가 증가(增加)함에 따라 약액농도(藥液濃度)가 10%까지는 증가(增加)하나 그 이후(以後)는 감소(減少)하는 경향(傾向)을 나타내고 있으며 Minalith의 경우는 ammonium sulfate의 경우와는 반대경향(反對傾向)을 나타내고 있다. COMPLY의 MOE는 약액농도(藥液濃度)가 증가(增加)함에 따라 감소(減少)하는 경향(傾向)을 나타내고 있지만 약액농도간(藥液濃度間)에 유의적(有意的)인 차이(差異)는 나타내고 있지 않다. COMPLY의 전단강도(剪斷強度)는 약제(藥劑)의 처리농도증가(處理濃度增加)에 따라 증가(增加)하는 경향(傾向)을 나타내고 있으나 유의적(有意的)인 차이(差異)는 없으며 ammonium sulfate보다는 Minalith가 더 양호(良好)한 결과(結果)를 나타내고 있다. COMPLY의 목피율(木破率)은 15%농도(濃度)까지는 증가(增加)하는 경향(傾向)을 보이고 있으나 그 이후(以後)는 감소현상(減少現象)을 나타내고 있다. 평행(平行) 및 교호적층재(交互的層材)의 결과(結果)는 COMPLY 결과(結果)보다 대체로 좋은 결과(結果)를 나타내고 있으나 무처리(無處理)파티클보오드의 결과(結果)는 저조(低調)한 결과(結果)를 나타내고 있다. 약제처리(藥劑處理) COMPLY의 MOR, MOE는 무처리(無處理) 파티클보오드의 결과(結果)보다 136%, 170%로 각각(各各) 증가(增加)하였다. 따라서 내수처리(耐火處理)로 인(因)한 파티클보오드의 강도감소현상(強度減少現像)은 COMPLY를 제조(製造)함으로서 강도적(強度的) 특성(性質)을 개선(改善)시킬 수 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제15권3호
• /
• pp.56-67
• /
• 1987

Plywoods used for construction as a decorative interior material are inflammable and can make fire accidents, causing destruction of human life and property. Therefore, it is indeed required to make fire-retardant treated plywood. In this study, 3.7mm yellow meranti plywoods were soaked in 18% boric acid solutions and tap water by hot-cold bath for 1/2, 2/2, 4/2, 6/2 hours and redrying of treated plywoods was carried out by press drying at the platen temperature of 110, 130, 160, $180^{\circ}C$ and then it was conducted to investigate solution absorption, drying rates, dynamic young's modulus. specific gravity and fire-retardant factors such as burning point, flame spread length. flame exhausted time, back side carbonized area and weight loss by treating time, treating solutions and platen temperature. The results are as follows; 1. When plywood was impregnated with the hot bath temperature of $70^{\circ}C$ for 1. 2, 4, 6 hours and the cold bath temperature of $15^{\circ}C$ for 2 hours respectively, retentions of boric acid were 1.565, l.597, 1.643, 1.709kg/$(30cm)^3$ and all of them exceeded the minimum retention [1.125kg/$(30cm)^3$] even in the shortest treatment. 2. In hot-cold bath method for 1/2 hours, the drying rates of treated plywood remarkably increased with the extension of platen temperature of 110, 130, 160, $180^{\circ}C$ and the values of boric acid treated plywood were 5.900, 10.196, 45.42, 54.958m.c%/min and the values of water treated plywood were 6.014, 12.373, 46.520, 55.730m.c%/min and drying rates of water treated plywood were faster than those of boric acid treated plywood. 3. The values of boric acid treated plywoods in dynamic young's modulus were widely higher than those of water treated plywoods. And it can be observed that there were highly significant differences for treating time between dynamic young's modulus, and the values of boric acid plywoods increased with the extension of treating time but on the contrary water treated plywoods were decreased values with prolonged time 4. It was observed that there were highly significant differences for platen temperature between dynamic young's modulus. When the values of water treated plywoods in dyna nic young's modulus were abruptly decreased according to the rise of platen temperature. boric acid treated plywoods showed rather increased values at $160^{\circ}C$ of platen temperature. And in 2- way interactions, there were also highly significant for dynamic young's modulus between treating time x treating solutions and platen temperature x treating solutions. 5. Correlation coefficients of fire-retardant factors were shown in table 5. It could be recognized that there were close correlations between the treating solutions and burning point, flame spread length, back side carbonized area, flame exhausted time and weight loss, but there was no correlation between fire-retardant factors and treating time and platen temperature. 6. From table 6, it can be observed that there were highly significant differences for burning point, flame spread length, flame exhausted time, back side carbonized area, weight loss between treating solutions. And in 2-way interactions, there were highly significant for burning point, flame spread length, weight loss between treating time $\times$ treating solutions.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2001년도 제14회 발표논문집
• /
• pp.27-34
• /
• 2001

화재를 예방하고자 방염 처리 한 일부 고건축재에서 발견된 미생물에 의한 고목재의 분해를 전자현미경을 사용하여 관찰하였다. 방염 처리한 고건축 부재는 2차벽 중층에 마이크로배열 방향과 동일한 동공을 가지고 있는 전형적인 연부후를 보였다. 또한 주사형 및 투과형 전자현미경을 사용하여 관찰한 결과 일부 세포벽은 세균에 의해 분해된 것으로 나타났다. 방염 처리한 고건축재에서 나타난 이같은 부후형태는 수분으로 포화된 수침 고목재에서 나타나는 전형적인 부후 형태이다. 부후 형태로부터 본 연구에 사용된 고건축 부재는 방염 처리 후 흡수성이 급격히 증가하였으며, 이같은 함수율의 증가는 사용된 방염제 때문인 것으로 생각된다. 본 연구 결과 사찰 및 궁질 등 고건축물에 사용하고 있는 방염제에 대한 보다 더 체계적이고 심도있는 연구가 필요함을 보여주었으며 아울러 방염제가 목재의 흡수성과 강도에 미치는 영향에 대한 연구가 뒤따라야함을 제시하였다. 본 논문은 또한 기상 열화에 의한 일부 목재의 표층부에 나타난 중간층의 분해에 대해서도 논의하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제11권3호
• /
• pp.39-48
• /
• 1983

본(本) 연구(硏究)는 내화처리(耐火處理) 파티클보오드의 휨강도(强度)와 물리적(物理的) 성질(性質)을 조사검토(調査檢討)함으로써 내화처리(耐火處理) 파티클보오드의 제조가능성(製造可能性)을 구명(究明)하고져 실시하였다. 본(本) 연구(硏究)에서는 목재(木材)파티클을 5, 10, 15, 그리고 20%농도(濃度)의 황산암모늄과 미나리스(Minalith) 용액(溶液)에 침적(沈積)시킨후 건조(乾燥)시켜서 제조(製造)하였다. 제조(製造)된 파티클보드의 휨강도(强度)와 물리적(物理的) 성질(性質)을 조사(調査)한 결과(結果)에 따르면 휨강도(强度)에서 파괴계수(破壞係數)와 탄성계수(彈性係數)는 한국공업표준규격(韓國工業標準規格) KS F 3104의 type 100수준(水準) (100kgf/$cm^2$, $1.5{\times}10^4kgf/cm^2$)을 만족 시켰으나 두께팽창율(膨脹率)은 모두 이 규격수준(規格水準)(12%)에 이르지 못하였다. 또한 박리저항(剝離抵抗)은 미나리스의 15와 20%농도(濃度)의 경우를 제외(除外)하고는 모두 한국공업표준규격(韓國工業標準規格) KS F 3104의 type 100 수준(水準)(1.5kgf/$cm^2$을 능가(凌駕)하였다.