• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.217-218
• /
• 2019

Fire resistance ceiling system is the structure of which the ceiling installed under the slave of the structure has the fire resistance performance. Because of having the fire resistance performance, fire resistive coatings on steel beams can be reduced and large span structures can be constructed. So, it have advantages of convenience for construction, shorten for construction time and cost reducing. In foreign country, it is general that one system consisting of slave and ceiling is constructed as a fire resistance system, in these cases, gypsum boards are mostly used as ceiling materials. The purpose of this study was to explain the possibility of expanding the use of gypsum boards by securing fire resistance performance of these ceilings.

• 한국화재소방학회논문지
• /
• 제25권4호
• /
• pp.22-27
• /
• 2011

건축물의 바닥 하부에 설치되는 비내력 천장이 일정 시간의 내화성능을 확보할 경우 바닥 및 보에 요구되는 내화성능의 감소가 가능하다. 이에 따라 건물시공시 이들 부재에 시공되는 내화피복 절감 및 충전구조 시공 완화 등으로 인하여 공간 구획의 활용성이 증가하여 비교적 경량으로 대규모 공간에 대한 시공이 가능하게 되어 건물 시공 유지관리의 편의성 확보, 공사기간의 단축 및 비용절감과 같은 경제적인 건축생산이 가능하게 된다. 외국에서는 보 바닥 및 천장재를 하나의 복합 시스템으로 구성하여 내화구조로 시공하거나 천장자체의 내화성능을 확보하는 경우가 있으나 국내에서는 이에 대한 연구가 진행되지 않아 건축물의 고층 경량화에 따른 경제적인 효율성을 확보하지 못하고 있는 실정이다. 따라서 국내 건축물에 적용 가능한 내화성능을 확보한 표준화된 비내력 내화천장구조의 개발이 필요하며, 이에 본 연구에서는 현재 일반적인 비내력 천장구조의 내화성능을 평가하여 향후 비내력 내화천장구조의 개발을 위한 기초자료를 제시하였다.

• Earthquakes and Structures
• /
• 제10권4호
• /
• pp.867-891
• /
• 2016

This paper addresses numerically the behavior of steel structures under Fire-after-Earthquake (FAE) loading. The study is focused on a four-storey library building and takes into account the damage that is induced in structural members due to earthquake. The basic objective is the assessment of both the fire-behavior and the fire-resistance of the structure in the case where the structure is damaged due to earthquake. The combined FAE scenarios involve two different stages: during the first stage, the structure is subjected to the ground motion record, while in the second stage the fire occurs. Different time-acceleration records are examined, each scaled to multiple levels of the Peak Ground Acceleration (PGA) in order to represent more severe earthquakes with lower probability of occurrence. In order to study in a systematic manner the behavior of the structure for the various FAE scenarios, a two-dimensional beam finite element model is developed, using the non-linear finite element analysis code MSC-MARC. The fire resistance of the structure is determined using rotational limits based on the ductility of structural members that are subjected to fire. These limits are temperature dependent and take into account the level of the structural damage at the end of the earthquake and the effect of geometric initial imperfections of structural members.

• 복합신소재구조학회 논문집
• /
• 제3권2호
• /
• pp.36-46
• /
• 2012

Structure Insulated Panel (SIP) is an wooden structure material with which structure and insulation functions are satisfied. Hence, it would be a cost-effective model to implement low energy house which has higher insulation and structure performance and which the wall thickness is able to be reduced. In this study, performance of thermal insulation and fire resistance were evaluated in order to verify applicability to low energy house. Fire resistance test is performed on vertical load bearing members for partitions, and the test results satisfy one hour of fire resistance condition according to KS F 2257. The members include two layers of fireproof gypsum board with thicknesses of 12.5mm attached to SIP. Thermal insulation performance is satisfied with the 2012 standard ($0.225W/m^2{\cdot}K$). As the performance of resistance and thermal insulation are satisfied, SIP is expected to be applied to low energy building materials. In the future, the structural safety will be confirmed by structural performance and seismic performance test and the guidelines for distribution will be drawn up.

• 한국해양공학회지
• /
• 제37권3호
• /
• pp.99-110
• /
• 2023

When a fire accident accompanied by an explosion occurs, the surrounding firewalls are affected by impact and thermal loads. Damaged firewalls due to accidental loads may not fully perform their essential function. Therefore, this paper proposes an advanced methodology for evaluating the fire resistance performance of firewalls damaged by explosions. The fragments were assumed to be scattered, and fire occurred as a vehicle exploded in a large compartment of a roll-on/roll-off (RO-RO) vessel. The impact velocity of the fragments was calculated based on the TNT equivalent mass corresponding to the explosion pressure. Damage and thermal-structural response analyses of the firewall were performed using Ansys LS-DYNA code. The fire resistance reduction was analyzed in terms of the temperature difference between fire-exposed and unexposed surfaces, temperature increase rate, and reference temperature arrival time. The degree of damage and the fire resistance performance of the firewalls varied significantly depending on impact loads. When naval ships and RO-RO vessels that carry various explosive substances are designed, it is reasonable to predict that the fire resistance performance will be degraded according to the explosion characteristics of the cargo.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.341-344
• /
• 2008

By investigating a series of catastrophic tunnel fires, this research aims to evaluate the fire resistance design method as applied to tunnel structures in Korea. It is shown that the current strategy is oriented towards smoke control and ventilation to reduce the loss of life. As structural collapse is not regarded, a general guide is proposed to obtain the fire safety.

• 한국화재소방학회논문지
• /
• 제26권1호
• /
• pp.80-88
• /
• 2012

본 연구에서는 건축물의 피난 및 방화에 관한 규칙 제3조에 명시된 법정내화구조 중 보의 내화성능을 평가하고, 국내외 규정과 비교 및 분석을 하였다. 현행 규칙에 따르면 국내의 법정내화구조는 피난 및 방화구조에 관한 규칙의 시방기준을 만족하면 최대 3시간의 내화성능을 갖는 것으로 본다. 법정내화구조로서 보는 총 5개의 구조가 있으나, 본 연구에서는 우선 철근콘크리조를 대상으로 피복두께에 따른 내화성능을 평가하였다. 실험결과 하중비 0.5와 피복두께 40 mm를 확보할 경우, 최대 법정요구내화시간인 3시간을 만족하는 것으로 나타났다. 철골철망 모르타르조 보의 경우, 피복두께 60 mm 하중비 0.4에서 3시간 내화성능을 확보할 수 있다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권6호통권58호
• /
• pp.88-96
• /
• 2009

본 연구에서는 RC구조물의 내구 및 내화성능을 동시에 향상시킬 수 있는 고인성 모르타르 (FR-ECC) 를 개발하여, 이를 RC구조물의 보수재료로서 사용하기 위한 실험적 연구를 실시하였다. 즉, FR-ECC를 이용하여 제조한 콘크리트 시험체의 강도, 열적특성, 모의부재의 철근부식특성, 내화성능 등에 대하여 검토하였으며, FR-ECC의 현장적용 가능성에 대해서도 평가하였다. 그 결과, FR-ECC는 기존 보수 모르타르에 비해 우수한 강도 및 내구성능을 보유하고, 휨균열 발생 후에도 외부열화 인자의 침입을 억제하여 철근부식을 방지하는 것으로 나타났다. 또한 FR-ECC를 적용한 부재는 ISO 834 가열조건에서도 우수한 내화성능을 갖는 것으로 나타났으며, 뿜칠성능 등의 현장시공 성능에서도 우수한 특성을 나타냈다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2010년도 춘계학술논문발표회 논문집
• /
• pp.389-394
• /
• 2010

A concrete filled square steel tube (CFT) is composed of the external steel material, which its strength is reduced in fire due to sudden temperature increase, and the internal concrete with high thermal capacity that can ensure the fire resistance performance of the structure. Therefore, research about the influence factors of the structural performance of CFT column is required in order to apply CFT column to a fire resisting structure, and additional research about influence for each condition is also necessary. Among the influence factors, the boundary condition between column and beam is important structurally, and it is one of the major factors that determine overall fire resisting performance. This study performed a fire experiment under loading in order to analyse the influences of CFT column to the boundary condition. As the results of the experiment, fire resistance time of 106 minutes was ensured for the clamped-end condition but 89 minutes for the hinge-end condition in case of the 360 cross section. And, fire resistance time of 113 minutes was ensured for the clamped-end condition but 78 minutes for the hinge-end condition in case of the 280 cross section. The difference in the fire resistance performance according to changes in the boundary conditions showed a tendency that larger change effect on the fire resistance performance was derived from smaller cross section area.

• 한국건축시공학회지
• /
• 제14권2호
• /
• pp.143-149
• /
• 2014

본 연구에서는 국내 공동주택의 건축 형식이 벽식 구조에서 기둥식 구조로 변화하면서 기둥식 구조에서 사용되는 건식 경량벽체에 대한 내화성능과 차음성능 기준을 제시하고자 하였으며, 공동주택 세대간 벽체의 경우는 국내 건축법에서 이미 의무화되어 있는 기준이 있어, 국내에 기준이 없는 세대내 벽체를 대상으로 내화성능은 30분의 내화성능을 1등급으로 하여 3개 성능등급으로 구분하였으며, 차음성능은 Rw+C값이 최소 35dB를 최소등급으로 3개 성능 등급을 기준을 제시하였다.