• 제목/요약/키워드: Fire emissions

검색결과 73건 처리시간 0.026초

1981-2020년 기간 동아시아 지역 산불 발생 위험도의 변동성 및 변화 특성 (Variability and Changes of Wildfire Potential over East Asia from 1981 to 2020)

  • 이준이;이두영
    • 한국지구과학회지
    • /
    • 제43권1호
    • /
    • pp.30-40
    • /
    • 2022
  • 전 세계 곳곳에서 산발적이고 불규칙적으로 발생하는 산불은 가연성 식생 지역에서 주요한 자연 변동성의 일환이면서 전 지구 탄소 순환에 중요한 역할을 하고, 공공 비상사태를 야기하는 심각한 자연재해이다. 산불 배출량, 연소 면적 및 산불기상지수를 활용한 산불 발생 위험도의 변동성 및 변화에 대한 연구가 전 세계 많은 지역에서 활발히 진행되고 있지만 동아시아 지역에 대한 연구는 아직 제한적이다. 본 연구는 1981년부터 2020년까지 지난 40년 기간 동안 산불기상지수 자료를 분석해 동아시아 지역 산불 위험도의 변동성 및 장기 변화 특성을 조사하였다. 동아시아 지역 산불 위험도의 첫 번째 주요 변동 모드는 전체 변동성의 29%를 설명하며, 대부분 지역에서 산불 발생 위험이 증가하고 있음을 나타낸다. 지구온난화 및 해양의 수 십년 주기 변동성과 연계되어 지표 기온이 상승하고 있는 것이 주요 원인이며, 이는 토양 수분의 상승 경향에 의해 그 효과가 다소 상쇄되고 있다. 두 번째 변동 모드는 엘니뇨-남방진동과 연계된 경년 변동성을 반영하며 전체 변동성의 17%를 설명한다. 엘니뇨(라니냐) 시기 동아시아 지역 강수량의 증가(감소)는 토양 수분을 증가(감소)시키며, 이에 따라 산불 위험이 감소(증가)하게 된다. 이는 지표 기온 상승(하강)에 의해 그 효과가 다소 상쇄된다. 산불 발생 위험도의 변동성 및 변화에 대한 이해와 예측을 증진하는 것은 그에 따른 피해를 저감하고 대비책을 마련하는 데 기여할 것이다.

발전보일러의 최적연소조정에 대한 실험적 연구 (The Study of Optimized Combustion Tuning for Fossil Power Plant)

  • 정재진;송정일
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
    • /
    • pp.102-108
    • /
    • 2009
  • Fossil power plants firing lower grade coals or equipped with modified system for NOx controls are challenged with maintaining good combustion conditions while maximizing generation and minimizing emissions. In many cases significant derate, availability losses and increase in unburned carbon levels can be attributed to poor combustion conditions as a result of poorly controlled local fuel and air distribution within the boiler furnace. In order to develop a on-line combustion tuning system, field test was conducted at operating power boiler. During the field test the exhaust gases' $O_2$, NOx and CO was monitored by using a spatially distributed monitoring grid located in the boiler's high temperature vestibule and upper convective back-pass region. At these locations, the flue gas flow is still significantly stratified, and air in-leakage is minimal which enables tracing of poor combustion zones to specific burners and over-fire air ports. using these monitored information we can improving combustion at every point within the furnace, therefore the boiler can operate at reduced excess $O_2$ and gas temperature deviation, reduced furnace exit gas temperature levels while also reducing localized hot spots, corrosive gas conditions, slag or clinker formation and UBC. Benefits include improving efficiency, reducing NOx emissions, increasing output and maximizing availability. Discussion concerning the reduction of greenhouse gases is prevalent in the world. When taking a practical approach to addressing this problem, the best way and short-term solution to reduce greenhouse gases on coal-fired power plants is to improve efficiency. From this point of view the real time optimized combustion tuning approach is the most effective and implemented with minimal cost.

  • PDF

발전용 보일러의 최적연소조정기법에 대한 실험적 연구 (The Study of Optimized Combustion Tuning Method for Fossil Power Plant)

  • 정재진;송정일
    • 한국태양에너지학회 논문집
    • /
    • 제29권5호
    • /
    • pp.45-52
    • /
    • 2009
  • Fossil power plants firing lower grade coals or equipped with modified system for $NO_x$ controls are challenged with maintaining good combustion conditions while maximizing generation and minimizing emissions. In many cases significant derate, availability losses and increase in unburned carbon levels can be attributed to poor combustion conditions as a result of poorly controlled local fuel and air distribution within the boiler furnace. In order to develop a on-line combustion tuning system, field test was conducted at operating power boiler. During the field test the exhaust gases' $O_2,\;NO_x$ and CO was monitored by using a spatially distributed monitoring grid located in the boiler's high temperature vestibule and upper convective rear pass region. At these locations, the flue gas flow is still significantly stratified, and air in-leakage is minimal which enables tracing of poor combustion zones to specific burners and over-fire air ports. using these monitored information we can improving combustion at every point within the furnace, therefore the boiler can operate at reduced excess $O_2$ and gas temperature deviation, reduced furnace exit gas temperature levels while also reducing localized hot spots, corrosive gas conditions, slag or clinker formation and UBC. Benefits include improving efficiency, reducing $NO_x$ emissions, increasing output and maximizing availability. Discussion concerning the reduction of greenhouse gases is prevalent in the world. When taking a practical approach to addressing this problem, the best way and short-term solution to reduce greenhouse gases on coal-fired power plants is to improve efficiency. From this point of view the real time optimized combustion tuning approach is the most effective and implemented with minimal cost.

목재 기반 소재의 연소생성물 노출 실험을 통한 독성요인 분석 (Toxicity Factor Analysis through the Exposure Experiment of the Combustion Products on Wood-Based Materials)

  • 김남균;박정호;조남욱
    • 한국화재소방학회논문지
    • /
    • 제30권6호
    • /
    • pp.57-63
    • /
    • 2016
  • 본 연구에서는 목재 기반 소재(MDF, OSB)의 연소생성물의 독성을 동물실험 기법을 사용하여 분석하였다. 실험용 쥐의 평균행동정지시간은 MDF가 OSB에 비해 짧았다. 이는 MDF 연소생성물의 독성이 OBS보다 높음을 의미한다. 해당 결과의 요인을 정량적으로 분석하기 위해 FT-IR을 통한 가스상 물질 분석을 수행하였다. 정성분석 결과 CO와 $CO_2$가 발생됨을 확인하였으며, 정량분석 결과 가스발생량은 OSB가 MDF보다 높음을 확인하였다. 또한 실험 후 실험용 쥐의 혈액분석 결과 OSB가 MDF에 비해 COHb 농도가 높음으로써, 가스상 물질의 발생량과 COHb 농도가 상관성이 있음을 확인하였다. 현재 재료의 연소생성물 독성 분석은 독성지수 Fractional Effective Dose (FED)를 통해 이루어지고 있다. FED는 독성가스 발생량을 기반으로 하고 있으며, 노출 물질의 독성이 높을수록 평균행동정지시간은 짧아진다. 하지만 본 연구 결과에서는 OSB가 MDF에 비하여 CO 발생량은 186.5%, COHb는 > 129.6% 임에도 불구하고 평균행동 정지시간이 51초가량 길게 나타남을 확인함으로써, 연소생성물 중 가스상 물질 이외의 추가적인 독성 요인에 대한 연구가 요구됨을 확인하였다.

수소경제로의 이행을 위한 안전관리 정책 연구 (A Study on Safety Policies for a Transition to a Hydrogen Economy)

  • 전대천
    • 한국수소및신에너지학회논문집
    • /
    • 제25권2호
    • /
    • pp.161-172
    • /
    • 2014
  • Hydrogen, which can be produced from abundant and widely distributed renewable energy resources, seems to be a promising candidate for solving the concerns for improving energy security, urban air pollution, and reducing greenhouse gas emissions. The two primary motivating factors for hydrogen economy are fossil fuel supply limitations and concerns about global warming. But the safety issues associated with hydrogen economy need to be investigated and fully understood before being considered as a future energy source. Limited operating experience with hydrogen energy systems in consumer environments is recognised as a significant barrier to the implementation of hydrogen economy. To prevent unnecessary restrictions on emerging codes, standards and local regulations, safety policies based on real hazards should be developed. This article studies briefly the direct impact-distances from hazard events such as hydrogen release and jet fire, and damage levels from hydrogen gas explosion in a confined space. Based on the direct impact-distances indicated in the accident scenarios and consumer environments in Korea, the safety policies, which are related to hydrogen filling station, hydrogen fuel cell car, portable fuel cell, domestic fuel cells, and hydrogen town, are suggested to implement hydrogen economy. To apply the safety policies and overcome the disadvantages of prescriptive risk management, which is setting guidance in great detail to management well known risk but is not covering unidentified risk, hybrid risk management model is also proposed.

파스콘 트로프의 연기유독성에 관한 연구 (A Study on the Toxic Gases and Smoke Hazard of PASCON Trough)

  • 이창우;현성호;최돈묵
    • 한국화재소방학회논문지
    • /
    • 제20권2호
    • /
    • pp.1-7
    • /
    • 2006
  • 본 연구는 파스콘 트로프의 화재시 발생되는 연기의 유독성 평가를 위해 KS F 2271에 의한 연기유해성 시험 및 NES 713방법에 의해 연소가스를 분석하고, 독성지수를 확인해 봄으로서 연소시 인체에 미치는 영향을 간접적으로 확인해 보고자 한다. 실험결과 파스콘 트로프는 KS F 2271인 건축물의 내장재료 및 구조의 난연성 시험기준에 적합한 것을 확인하였다. NES 713 방법에 의한 파스콘 제품에서 발생하는 연소가스는 이산화탄소와 일산화탄소가 전부임을 알 수 있으며, 연소가스의 독성지수는 0.944로 나타났다. 이러한 수치는 제품의 연소시 발생되는 연소가스를 30분 이상 노출되어야 위험한 농도에 이룰 수 있다는 것을 의미한다. 난연성능 요구시 연기유독성 평가나 연기의 발생량을 규제하지 않고 있는 국내의 실정에 비추어 볼 때 파스콘 제품의 연소가스 독성지수는 비교적 낮은 수치이다.

마이크로 가스터빈용 하이브리드/이중 선회제트 연소기 개발 (Part II: 비반응 유동에 관한 수치해석) (Development of Hybrid/Dual Swirl Jet Combustor for a MGT (Part II: Numerical Study on Isothermal Flow))

  • 문선여;황철홍;이기만
    • 한국추진공학회지
    • /
    • 제17권5호
    • /
    • pp.70-79
    • /
    • 2013
  • 마이크로 가스터빈용 하이브리드/이중 선회제트 연소기의 비반응 유동 및 혼합특성에 관한 수치해석 연구가 수행되었다. 고정된 열부하에서 pilot 버너의 위치, 선회 각 및 방향이 주요 변수로 검토되었다. 결과로서, pilot 버너의 위치, 선회 각 및 방향의 변화는 버너 출구 근처의 난류 유동장, 특히 중앙 재순환영역 및 난류강도의 큰 변화를 초래하며, 화염안정성 및 배기성능의 큰 변화를 동반하게 된다. 실험결과와의 비교를 통해, 하이브리드/이중 선회제트 연소기의 개발을 위하여 화염안정성 및 배기의 측면에서 pilot 버너의 최적 위치, 선회각$45^{\circ}$ 그리고 정방향 선회유동 조건들이 선택되었다.

화학반응기의 안전성 향상을 위한 예방조치 개선에 관한 연구 (A Study on the Improvement of Preventive Measures for Improving the Safety of Chemical Reactor)

  • 변윤섭
    • 한국가스학회지
    • /
    • 제24권4호
    • /
    • pp.32-38
    • /
    • 2020
  • 화학반응기에 발생한 화재·폭발 사고사례를 기반으로 화학반응기에 설치되어 있는 예방조치의 문제점을 분석하였다. 화학반응기는 다품종의 화학제품을 생산하며, 반응폭주시 급격히 상승하는 압력을 해소하기 위해 파열판을 설치하고 파열판의 기능을 유지하기 위해 배출물질을 대기로 배출하도록 허용하고 있어 화재·폭발사고가 발생하였다. 이를 개선하기 위한 방안으로 안전건전성수준(SIL3)을 기반으로 한 안전계장시스템(SIS)을 화학반응기의 예방조치로 적용하였다. 화학반응기의 원재료를 적하하는 배관에 긴급차단밸브를 직렬로 2개 설치하여 반응폭주시 긴급차단밸브 2개 중 1개만 작동하여도 원재료 공급을 차단할 수 있도록 하고, 반응응제제 공급배관에는 자동 ON/OFF 밸브를 병렬로 설치하여 반응폭주시 1개의 밸브만 열려도 반응억제제가 투입될 수 있게 하였다.

유동장 자극이 화염의 질소산화물 배출에 미치는 영향 (Effects of Flow Excitation on the Nitrogen Oxide Emission of a Non-Premixed Flame)

  • 이기만
    • 한국화재소방학회논문지
    • /
    • 제18권2호
    • /
    • pp.34-40
    • /
    • 2004
  • 층류 비예혼합 분류 화염에서 다양한 주파수와 강도로 외부에서 유동장에 자극을 주었을 때 화염의 배출특성과 거동에 대해서 실험적으로 조사하였다. 먼저 일정한 관 공명 주파수에서 가진 강도를 가변시켜 난류화염 된 부상화염에서 질소산화물 배출 지수($EINO_x$)를 측정하였다. 또한, 가진 강도가 일정한 상태에서 주파수를 0 Hz에서 높은 주파수인 2 KHz까지 다양한 주파수 조건으로 가진된 한 경우에도 질소산화물의 배출지수를 측정하였다. 큰 가진 강도의 관공명 주파수로 가진된 경우 부상된 난류화염에서 $NO_x$ 배출 특성은 다음과 같이 크게 세 가지 형태의 특성을 보였다. Group I의 화염에서는 공간적인 섭동이 크며 비교적 화염길이가 길고 높은 $NO_x$ 배출 특성을 보였으며 Group II에서는 상대적으로 짧은 길이와 좁은 폭의 화염거동에 낮은 $NO_x$배출 특성을 보였다. Group III에서는 약간 긴 화염길이에 매우 큰 화염체적으로 상당한 높이까지 시ㆍ공간적으로 섭동이 큰 운동양태로 부상되는 거동과 가장 높은 $NO_x$ 배출 특성을 보였다.

DME/Air 비예혼합화염의 NOx 생성에서 산소원자의 역할 (The Role of Oxygen Atom in the NOx Formation of DME/Air Nonpremixed Flames)

  • 김태현;황철홍;이승로;이창언
    • 한국연소학회지
    • /
    • 제14권1호
    • /
    • pp.9-18
    • /
    • 2009
  • The NOx emission characteristics of DME in counterflow nonpremixed flames were investigated numerically, and brief experiments were carried out to compare the flame shapes and NOx emissions with those of $C_{3}H_{8}$ and $C_{2}H_{6}$. The DME flames were calculated using Kaiser's mechanism, while the $C_{2}H_{6}$ flames were calculated using the $C_3$ mechanism. These mechanisms were combined with the modified Miller-Bowman mechanism for the analysis of NOx. Experimental results show that DME flame has the characteristics of partial premixed flame and the flame length becomes very shorter compared with general hydrocarbon fuels and then, the NOx emission of DME is low as much as 60 % of $C_{3}H_{8}$. In the calculated results of counterflow nonpremixed flames, the $EI_{NO}$ of DME nonpremixed flame is low as much as 50 % of the $C_{2}H_{6}$ nonpremixed flame. The cause of $EI_{NO}$ reduction is attributed mainly to the characteristics of partial premixed flame due to the existence of O atom in DME and partly to the O-C bond in DME, instead of C-C bond in hydrocarbon fuels.

  • PDF