• 제목/요약/키워드: Fire Safety Test

검색결과 543건 처리시간 0.023초

그라스울 샌드위치패널의 화재 안전 성능에 대한 실험적 연구 (An Experimental Study on Fire Safety Performance of Glass Wool Sandwich Panel)

  • 권오상;유용호;김흥열;민세홍
    • 한국화재소방학회논문지
    • /
    • 제26권5호
    • /
    • pp.21-27
    • /
    • 2012
  • 본 연구에서는 그라스울 샌드위치패널의 연소특성을 판단하기 위하여 밀도와 두께가 다른 총 6종류(밀도: 48/64 K, 두께: 50/75/100 T)의 시편을 선정하여, KS F ISO 9705 시험법을 준용하여 실물화재 시험을 실시하였다. 실물화재 시험은 $2.4(L){\times}3.6(W){\times}2.4(H)m$ 크기의 화재실 내부에 시험체를 설치하여 프로판 버너에 의해 시편을 화염에 노출시켜 연소특성을 판단하게 된다. 총 25분에 시험 시간 동안 프로판 버너는 100 kW(10분), 300 kW(10분)로 출력되며, 시험을 통해 열방출률, 열류량, 내부 온도가 측정된다. 실물화재 시험을 실시한 결과, 버너 열량을 포함하여 각 시편의 최대 열방출률은 333.2~365.5 kW, 최대 열류량은 12.4~12.9 kW/$m^2$로 나타났으며, 최대 내부온도는 모든 시편에서 $500^{\circ}C$를 초과하지 않았다. 실물화재 시험 중에 플래시오버 현상은 발생하지 않았으며, 각 시편의 열방출률, 열류량, 내부 온도 측정결과 시편의 밀도 및 두께에 따른 차이점은 나타나지 않았다.

A60급 갑판 관통 관의 방화성능 평가를 위한 과도 열전달 해석과 화재시험 (Transient Heat Transfer Analysis and Fire Test for Evaluation on Fire Resistance Performance of A60 Class Deck Penetration Piece)

  • 박우창;송창용
    • 한국산학기술학회논문지
    • /
    • 제22권4호
    • /
    • pp.1-9
    • /
    • 2021
  • A60급 갑판 관통 관은 선박과 해양플랜트의 화재 발생 시 인명의 보호와 화염전파를 방지하기 위해 갑판 구획에 설치되는 방화 장치이다. A60급 갑판 관통 관이 새로 개발되거나 기존의 설계가 변경될 경우 국제해사기구의 화재시험절차 규정에 따라 A60급 갑판 관통 관의 방화성능을 검증하도록 요구하고 있다. 따라서, 본 논문에서는 신규 개발된 선박과 해양플랜트용 A60급 갑판 관통 관의 방화 설계의 적합성을 평가하기 위해 과도 열전달 해석을 수행하였고, 화재시험을 통해 해석결과의 타당성을 검증하였다. 또한 A60급 갑판 관통 관의 열전달 특성은 관의 직경, 내부형상 그리고 재질과 같은 설계 사양에 따라 비교하여 검토하였다. 과도 열전달 해석은 범용 유한요소법 소프트웨어인 ABAQUS/Implicit를 사용하여 수행하였으며, 해석결과의 검증을 위한 화재시험은 해사안전위원회에서 규정한 화재시험절차 코드에 따라 수행하였다. 본 연구에서 검토한 A60급 갑판 관통 관의 방화성능은 국제 해상안전규정을 만족하였고, 재질 사양의 설계가 중요한 것으로 나타났다. 최대 시험온도를 기준으로 SUS316L 재질의 측정온도는 S45C 재질보다 평균적으로 25% 낮게 나타났고, 이때 각 재질의 열전도계수와 비열의 차이는 각각 17%와 58%였다.

Risk Perception and Safety Knowledge of Scuba Divers

  • Cho, Byung-Jun;Ko, Jang-Sik;Kim, Gyoung-Yong;Kim, Yong-Seok
    • 한국컴퓨터정보학회논문지
    • /
    • 제24권5호
    • /
    • pp.131-137
    • /
    • 2019
  • This study was aimed to identify a study on risk perception and safety knowledge and awareness of scuba diver. In order to achieve this purpose, a total of 310 customers over the age of 20 were selected as study participants form diving pools and dive resort in Seoul, Gyeonggi, Gangwon, Gyeongsang area using the convenience sampling method. However, only data from 295 customers were used after screening the data for reliability. The instrument for data collection was a questionnaire, and descriptive statistics, inter-item consistency reliability, t-test, ANOVA, post hoc test, correlation analysis, pearson chi-square test were conducted on the data using the SPSS 21.0 version statistical package program. The followings are the results: First, risk perception differs significantly according to age, education level, occupation and participation period. Second, participation period and safety knowledge have positive correlation.

발암성 흡입독성 시험물질선정 신뢰도 향상방안에 관한 연구 (A Study on the Selection of Reliable Carcinogenic Inhalation Toxicity Test Substances)

  • 조중래;임경택;이종호
    • 한국산업보건학회지
    • /
    • 제31권3호
    • /
    • pp.185-193
    • /
    • 2021
  • Objectives: Inhalation toxicity testing of chemical substances to identify carcinogenicity requires a long time and considerable cost, so the selection of test candidates is a very important aspect. This study was performed to determine optimal procedures for selecting carcinogenic inhalation toxicity test substances as conducted by the Occupational Safety and Health Research Institute (OSHRI). Methods: At the beginning, a database was constructed containing complex information such as usage amount, hazard, carcinogenicity prediction, and testability in order to select chemicals requiring carcinogenicity testing. Selection of test substances was carried out with priority given to usage, carcinogenicity, and testability. Results: Chemicals used in large quantities in industrial fields and strongly suspected of carcinogenicity were winnowed down to 12 substances, and these substances were scheduled for future testing by OSHRI. Conclusions: For the stable and reliable operation of carcinogenicity tests as conducted by OSHRI, this study standardized the procedures for selecting carcinogenicity test substances and suggested the introduction of various carcinogenicity prediction techniques.

중저압 노즐을 이용한 사찰 및 목조 문화재용 미분무 패키지 소화설비 개발 (Development for the Water Mist Package Having a Low Pressure Nozzles on Wooden Cultural Properties and Temples)

  • 김태환;명상엽
    • 한국화재소방학회논문지
    • /
    • 제24권4호
    • /
    • pp.62-68
    • /
    • 2010
  • 우리나라의 목조문화재는 구조적 특성상 화재에 매우 취약하고, 최근 들어 산불 및 방화 등의 이유로 많은 문화재들이 화재로 손실되고 있다. 따라서 본 연구 개발은 소량의 소화용수 사용이 가능한 중저압용 미분무 노즐과 그 패키지 소화 시스템을 개발하여 물로 인한 최소한의 피해와 최대의 소화효과와 더불어 최고의 화재안전 시스템을 개발하였다. 목조문화재 건축물의 특성을 고려하여 건축물의 내부와 외부에서 각각 적용 가능한 두 가지 형태의 중저압 미분무 노즐을 개발하였다. 외부용 노즐은 13~14bar의 압력에 서 30~35l/min의 유량을 갖고 있으며, 내부용 노즐은 14~15bar의 압력에서 25~30l/min 유량을 갖는 노즐을 설계 개발하였다. 개발된 노즐의 성능을 평가하기 위하여 궁궐 모양의 대표적인 목조문화재 실무크기인 가로 4.9m, 세로 4m, 높이 6.6m의 모형을 목재로 제작하였고 화재 시나리오를 만들어 실증화재 소화 실험을 실시하였다. 실증화재 실험결과 $200{\mu}m$의 물방울 입자 크기를 갖는 중저압 노즐이 한 적응성이 있는 것으로 나타났으며, 완전소화에는 실패하더라도 소방대가 출동할 때까지 연소확대가 되지 않도록 화재를 억제해 줄 수 있을 것으로 나타났다.

구획화재실험을 통한 온도 변화 예측 기법 연구 (The Study on the Prediction of Temperature Curve by Compartment Fire Experiment)

  • 권오상
    • 한국화재소방학회논문지
    • /
    • 제28권5호
    • /
    • pp.44-51
    • /
    • 2014
  • 본 연구에서는 건축물에서의 성능기반 화재안전 설계 시에 사용되는 구획공간에서의 화재 성상 분석을 위해서 사무실 공간을 대상으로 하여 $2.4(L){\times}3.6(W){\times}2.4(H)m$의 크기의 구획 Mock-up을 제작하고 구획 내부에는 화재하중 $18.74kg/m^2$을 적용하여 책상, 의자, 컴퓨터 등과 같은 실제 가연물을 배치하여 화재실험을 실시하였다. 화재실험 결과, 구획 공간의 내부 중앙에서는 394~408 s 사이에 $600^{\circ}C$에 도달하였고 구획 입구 모서리에서는 404~420 s 사이에 $600^{\circ}C$에 도달하였다. 본 연구에서는 화재실험을 통해 측정된 온도변화 데이터를 BFD 곡선에 적용하여 화재시 구획 공간내의 온도변화 예측 기법을 분석하고자 하였으며, 화재실험을 통해 BFD 곡선 인자는 최대온도 $900^{\circ}C$, 최대온도 도달시간 7분과 형태계수 1.5로 결정하였다. BFD 곡선에 적용된 사무실 공간의 시간에 따른 온도 곡선은 화재초기에 빠르게 상승한 이후에 약 9분경 이후에 감소하는 형태를 나타내고 있다.

Behaviour of ultra-high strength concrete encased steel columns subject to ISO-834 fire

  • Du, Yong;Zhou, Huikai;Jiang, Jian;Liew, J.Y. Richard
    • Steel and Composite Structures
    • /
    • 제38권2호
    • /
    • pp.121-139
    • /
    • 2021
  • Ultra-high strength concrete (UHSC) encased steel columns are receiving growing interest in high-rise buildings owing to their economic and architectural advantages. However, UHSC encased steel columns are not covered by the modern fire safety design code. A total of 14 fire tests are conducted on UHSC (120 MPa) encased steel columns under constant axial loads and exposed to ISO-834 standard fire. The effect of load ratio, slenderness, stirrup spacing, cross-section size and concrete cover to core steel on the fire resistance and failure mode of the specimens are investigated. The applicability of the tabulated method in EC4 (EN 1994-1-2-2005) and regression formula in Chinese code (DBJ/T 15-81-2011) to fire resistance of UHSC encased steel columns are checked. Generally, the test results reveal that the vertical displacement-heating time curves can be divided into two phases, i.e. thermal expansion and shortening to failure. It is found that the fire resistance of column specimens increases with the increase of the cross-section size and concrete cover to core steel, but decreases with the increase of the load ratio and slenderness. The EC4 method overestimates the fire resistance up to 186% (220 min), while the Chinese code underestimates it down to 49%. The Chinese code has a better agreement than EC4 with the test results since the former considers the effect of the load ratio, slenderness, cross section size directly in its empirical formula. To estimate the fire resistance precisely can improve the economy of structural fire design of ultra-high strength concrete encased steel columns.

Experimental Evaluation of the Thermal Integrity of a Large Capacity Pressurized Heavy Water Reactor Transport Cask

  • Bang, Kyoung-Sik;Yang, Yun-Young;Choi, Woo-Seok
    • 방사성폐기물학회지
    • /
    • 제20권3호
    • /
    • pp.357-364
    • /
    • 2022
  • The safety of a KTC-360 transport cask, a large-capacity pressurized heavy-water reactor transport cask that transports CANDU spent nuclear fuel discharged from the reactor after burning in a pressurized heavy-water reactor, must be demonstrated under the normal transport and accident conditions specified under transport cask regulations. To confirm the thermal integrity of this cask under normal transport and accident conditions, high-temperature and fire tests were performed using a one-third slice model of an actual KTC-360 cask. The results revealed that the surface temperature of the cask was 62℃, indicating that such casks must be transported separately. The highest temperature of the CANDU spent nuclear fuel was predicted to be lower than the melting temperature of Zircaloy-4, which was the sheath material used. Therefore, if normal operating conditions are applied, the thermal integrity of a KTC-360 cask can be maintained under normal transport conditions. The fire test revealed that the maximum temperatures of the structural materials, stainless steel, and carbon steel were 446℃ lower than the permitted maximum temperatures, proving the thermal integrity of the cask under fire accident conditions.

담유 실험에 의한 인화성 액체의 연소 패턴 해석에 관한 연구 (A Study on Combustion Patterns of Flammable Liquids by Contained Oil Test)

  • 조희수;최충석
    • 한국화재소방학회논문지
    • /
    • 제28권4호
    • /
    • pp.14-20
    • /
    • 2014
  • 본 연구는 인화성 액체를 특정 용기에 담유하고 구획된 공간에서 연소 실험을 실시하여 연소 패턴을 분석하는 데 있다. 담유 실험에 사용된 용기는 깊이 20 mm, 넓이 150 mm의 플라스틱이다. 화염이 착화되어 연소되는 과정은 디지털카메라(digital camera) 및 비디오카메라(video camera)를 이용하여 확보하였다. 화염이 최성기에 도달하는 속도는 벤젠이 가장 빠르고 약 60 s이다. 반면 가장 늦게 것은 알코올이었으며 약 360.0 s로 6배 정도 차이가 있었다. 화염이 최성기에 도달하였을 때 플라스틱 용기와 인화성 액체가 동시에 연소됨에 따라 연기는 대부분 검정색이었다. 연소가 완료된 후유증 검지관(crime investigation tube)을 이용하여 유증을 조사한 결과 대두유를 제외한 모든 인화성 물질에서 유증 채취가 가능했다. 즉, 연소 물질의 종류에 따라 화재의 확산 속도 및 패턴 등에 큰 차이가 있다는 것을 알 수 있었다.

재래시장 전기화재 감소를 위한 전기안전감시시스템 개발 연구 (Development of Electric safety monitoring system for reducing the electrical fire at traditional market)

  • 김기현;이상익;배석명
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2009년도 추계학술대회 논문집
    • /
    • pp.259-262
    • /
    • 2009
  • This paper in order to reduce the electric disaster damage which is caused by with electric equipment of traditional market developed the electric safety monitoring system which is suitable in traditional market. With for this did the actual condition investigation about electrical equipment of traditional market and we constructed Test-bed for testing reliability of electric safety monitoring system. Also experiment led in Test-bed and confirmed a stability. This paper following will be used with the data for the reliability security of the electric safe system operation which follows in the traditional market actual proof equipment construction which will be advanced.

  • PDF