• Tribology and Lubricants
• /
• 제37권3호
• /
• pp.112-116
• /
• 2021

Appropriate friction model usage is important for impact analysis because the relative motions between parts that are in contact for very short durations can vary greatly depending on the friction model. Vehicle seat components that have significant effects on impact analysis are also considered. This paper presents an experimental investigation of various material contact pairs to obtain the friction parameters of the Benson exponential friction model for impact simulation. The Coulomb friction model has limitations for impact analysis because of singularity at zero velocity. Metal/nonmetal materials are prepared, and friction tests are conducted for various sliding speeds, loads, and lubrication conditions. The obtained data are used in the friction model to implement finite element analysis. The parameters of the friction model are obtained by the curve-fitting method. The experimental results show that the friction coefficient with metal/nonmetal contact pairs is stable regardless of the working conditions. The friction model used in this study can also be applied for finite element analysis of the crash conditions, where the friction changes abruptly at the contact interface; the obtained friction parameters are also expected to be more accurate with more precise tests under different working conditions. These results can help improve the accuracy of the finite element analysis.

• Structural Engineering and Mechanics
• /
• 제6권1호
• /
• pp.95-113
• /
• 1998

The extensive use of honeycomb sandwich structures has led to the need to understand and analyze their low velocity impact response. Commercially available finite element software provides a possible analysis tool for this type of problem, but the validity of their material properties models for honeycomb materials must be investigated. Three different problems that focus on the effect of differences in honeycomb material properties on static and dynamic response are presented and discussed. The first problem considered is a linear elastic static analysis of honeycomb sandwich beams. The second is a nonlinear elastic-plastic analysis of a circular honeycomb sandwich plate. The final problem is a dynamic analysis of circular honeycomb sandwich plates impacted by low velocity projectiles. Results are obtained using the ABAQUS final element code and compared against experimental results. The comparison indicates that currently available material properties models for honeycomb materials can be used to obtain a good approximation of the behavior of honeycomb sandwich structures under static and dynamic loading conditions.

• 한국군사과학기술학회지
• /
• 제20권4호
• /
• pp.467-473
• /
• 2017

In this paper, impact characteristics of a water entry gliding vehicle were analyzed using a finite element method. To guarantee the validity of analysis results, a convergence test was performed for several ratios of Euler and Largrange mesh sizes. The impact coefficient was calculated with respect to entry angles and angle of attacks. It can be observed that the impact coefficient was large at a high cross-section gradient and was also affected by cavitation. This study could be useful in the preliminary design stage of a water entry bomb development.

• Composites Research
• /
• 제31권5호
• /
• pp.215-220
• /
• 2018

본 연구에서는 적층 패턴이 다른 5가지 섬유금속적층판(Fiber Metal Laminates, FMLs)에 대한 유한요소해석을 수행하여 선행 연구로 수행한 낙추충격시험과의 유사성을 검증하였고, 효과적인 저속 충격 해석 모델을 개발하였다. 또한 동일한 두께를 가지는 연강(mild steel)과 에너지흡수율을 비교하여 Carbon-Steel 섬유금속적층판의 내충격성을 확인하였다. Carbon-Steel 섬유금속적층판은 동일한 두께를 가지는 연강에 비하여 우수한 충격흡수율을 보였으며, 모든 적층 패턴에서 96% 이상의 높은 에너지흡수율 갖는 것을 확인하였다. 본 연구에서 제시한 저속 충격 해석 모델은 복합형상 및 자동차 구조체 연구에 효과적으로 적용할 수 있을 것으로 판단된다.

• Elastomers and Composites
• /
• 제41권1호
• /
• pp.40-48
• /
• 2006

고무는 금속 및 플라스틱 재료와 달리 작은 하중에서도 큰 변형이 발생되며, 높은 변형 구간에서 탄성특성을 보이는 특징이 있다. 특히 충격흡수 특성이 금속 및 플라스틱보다 우수하므로 제진 및 충격 완충구조물로 널리 활용되고 있다. 충격하중을 받는 고무 구조물의 특성을 평가하기 위하여 자유 낙하형 충격시험기를 이용하여 충격실험을 실시하였으며, ABAQUS/Explicit를 이용하여 유한요소 해석을 수행하였다. 고무의 동강성은 충격펄스의 최대변형량과 충격지속시간으로부터 얻어진 진폭과 주파수를 적용하여 동특성 시험을 수행하고 WLF모델을 적용하여 높은 주파수 대역의 동강성을 예측하였다. 실험을 실시한 $0.3{\sim}l.5J$의 충격에너지 영역에서는 고무의 경도가 증가되면 충격흡수율이 감소되며, 충격에너지가 커질수록 충격흡수율은 감소하는 경향을 나타내었다.

• 한국소음진동공학회논문집
• /
• 제14권8호
• /
• pp.661-667
• /
• 2004

The characteristics of noise and vibration by a heavy impact source was studied. The triggering method was used for increasing the reliability and stability to measure the level of sound pressure. sound intensity and vibration acceleration. A simple finite element model and a rigid body analysis method were suggested to calculate the natural frequencies of the multi-layer floor system. The results show that the resilient materials decrease the natural frequency of the reinforced concrete slab, make a resonance with dominant driving frequency in the low frequency region, and increase the vibration and noise level. A simple finite element model and rigid body models was suggested to calculate the natural frequencies of the floor systems.

• 한국전산구조공학회논문집
• /
• 제18권4호통권70호
• /
• pp.373-383
• /
• 2005

다양한 분야에서 방사선물질을 수송하기 위해 사용되고 있는 수송용기(cask)는 국내 원자력안전규정 및 IAEA 운반규정에서 정한 9m 자유낙하충격의 가상사고조건을 만족시켜야 된다. 현재까지 수송용기의 낙하충격력은 주로 복잡한 계산과정을 갖는 유한요소해석에 의해 수행되어 왔다. 본 논문에서는 수송용기 본체의 동적충격응답에 대해 모드중첩기법을 이용하여 해석하고 그 해법방법을 제시하였다. 해석결과는 이전에 실시되었던 시험결과와 유한요소해석과 비교를 통하여 그 타당성을 입증하였다. 본 해석방법은 유한요소 해석과 비교하여 간단한 방법으로서 수송용기에 대한 대체적인 동적응답을 예측할 수 있다.

• Steel and Composite Structures
• /
• 제42권3호
• /
• pp.325-351
• /
• 2022

This paper studies the lateral impact behavior of ultra-high performance fiber-reinforced concrete (UHPFRC) filled double-skin steel tubular (UHPFRCFDST) columns. The impact force, midspan deflection, and strain histories were recorded. Based on the test results, the influences of drop height, axial load, concrete type, and steel tube wall thickness on the impact resistance of UHPFRCFDST members were analyzed. LS-DYNA software was used to establish a finite element (FE) model of UHPFRC filled steel tubular members. The failure modes and histories of impact force and midspan deflection of specimens were obtained. The simulation results were compared to the test results, which demonstrated the accuracy of the finite element analysis (FEA) model. Finally, the effects of the steel tube thickness, impact energy, type of concrete and impact indenter shape, and void ratio on the lateral impact performances of the UHPFRCFDST columns were analyzed.

• 산업경영시스템학회지
• /
• 제35권2호
• /
• pp.52-56
• /
• 2012

Recently, the pedestrian protection regulations of Europe and Japan are becoming more stringent. However, it is difficult to evaluate the performance of protection because each regulation has different test conditions such as dummy, impact speed and so on. In this study, we construct a finite element model of pedestrian lower legform impactor prescribed in EEVC (European Experimental Vehicle Committee) W/G 10, and performed a impact analysis between the impactor and the front end module of vehicle. The simulations are carried out by using LS-DYNA3D, which is a well-known nonlinear dynamic simulation software. The analysis results according to various impact location show the impact characteristics of the lower legform.

• 소성∙가공
• /
• 제16권5호통권95호
• /
• pp.370-374
• /
• 2007

A motorcycle helmet is very essential to protect the head of driver and it is directly connected to driver's life. Prior to producing the helmet, it has to be passed the process of impact test to evaluate its safety. This test evaluates peak acceleration and head injury criteria (H.I.C.). This paper simulates the impact test with finite element method to find the behavior of helmet during the test. Also, the effect of impact sites on the helmet was evaluated to improve the thickness distribution of the helmet.