Browse > Article
http://dx.doi.org/10.9725/kts.2021.37.3.112

Feasibility Study of Friction Characteristics for Impact Analysis  

Lee, Kwang-Hee (Graduate School, Dept. of Mechanical Engineering, Inha University)
Lee, Chul-Hee (Dept. of Mechanical Engineering, Inha University)
Publication Information
Tribology and Lubricants / v.37, no.3, 2021 , pp. 112-116 More about this Journal
Abstract
Appropriate friction model usage is important for impact analysis because the relative motions between parts that are in contact for very short durations can vary greatly depending on the friction model. Vehicle seat components that have significant effects on impact analysis are also considered. This paper presents an experimental investigation of various material contact pairs to obtain the friction parameters of the Benson exponential friction model for impact simulation. The Coulomb friction model has limitations for impact analysis because of singularity at zero velocity. Metal/nonmetal materials are prepared, and friction tests are conducted for various sliding speeds, loads, and lubrication conditions. The obtained data are used in the friction model to implement finite element analysis. The parameters of the friction model are obtained by the curve-fitting method. The experimental results show that the friction coefficient with metal/nonmetal contact pairs is stable regardless of the working conditions. The friction model used in this study can also be applied for finite element analysis of the crash conditions, where the friction changes abruptly at the contact interface; the obtained friction parameters are also expected to be more accurate with more precise tests under different working conditions. These results can help improve the accuracy of the finite element analysis.
Keywords
friction; friction model; lubrication; friction decay constant;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Jeong, N.-G., "A Study on the behavior of the Piston with Varying Friction Force in the Double Cylinder-typed Extension Gas Spring," Journal of the Korea Academia-Industrial, Vol.19, No.2, pp.9-14, 2018.
2 Lodygowski, A., Faure, L., Voyiadjis, G. Z, and Philippon, S., "Dry Sliding Friction Experiments at Elevated Velocities," Strain, Vo.47, No.2, pp.436-453, 2011.   DOI
3 Yang, Y.M., Park, T.L., Kim, C.L, and Kim, D.E., "Effect of Lubricant Viscosity on the Frictional Characteristics of Polymer Material," Proc. Fall Conf. Korean Soc. Tribol. Lubr. Engr., Muju, Korea, October, 2016.
4 Anvari, A., "Friction Coefficient Variation with Sliding Velocity in Copper with Copper Contact," Periodica Polytechnica Mechanical Engineering, Vol.60, No.3, pp.137-141, 2016.   DOI
5 Park, J.H., Yoo, H.H, and Hwang, Y., "Dynamic Analysis of Constrained Multibody Systems Undergoing Collision with Friction," Transactions of the Korean Society of Mechanical Engineer-A, Vol.24, No.7, pp.1712-1720, 2000.
6 Arakawa K., "An Analytical Model of Dynamic Sliding Friction During Impact," Scientific Report, Vol.7, pp.1-5, 2017.   DOI
7 Pennestri, E., Rossi, V., Salvini, P, and Valentini, P., "Review and Comparison of Dry Friction Force Models", Nonlinear Dynamics, Vol.83, pp.1785-1801, 2016.   DOI
8 Hong, S.-J., Lee, K.-H., Lim, H.-W., Kim, J.-W., and Lee, C.-H., "The Friction and Wear Characteristics of the Seat Recliner Parts Based on Lubricant Characteristics," Tribol, Lubr., Vo.35, No.3, pp.183- 189, 2019, https://doi.org/10.9725/kts.2019.35.3.183   DOI
9 Dong, S., Sheldon, A., Pydimarry, K, and Dapino, M., "Friction in LS-Dyna: Experimental Characterization and Modeling Application", 14th International LS-Dyna Users Conference, Detroit, USA, June, 2016.
10 Liu, Y.F., Li, J., Zhang, Z.M., Hu, X. H, and Zhang W.J., "Experimental Comparison of Five Friction Models on the Same Test-bed of the Micro Stickslip Motion System," Mechanical Sciences, Vol.6, pp.15-28, 2015.   DOI