• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.79-82
• /
• 2003

In case of performing resin transfer molding (RTM), race track effects and non-uniform fiber volume fraction may cause undesirable resin flow pattern and thus result in dry spots, which affect the mechanical properties of the finished parts. In this study, a real time RTM control strategy to reduce these unfavorable effects is proposed. Through numerical simulations and experiments, the validity of the proposed scheme is demonstrated.

• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.16-20
• /
• 2021

Since the durability evaluation for improving the durability of PEMFC polymer membranes is very important for the development of PEMFC, research and development of the polymer membrane durability evaluation protocol (AST) continues. Recently, DOE's polymer membrane chemical/mechanical durability evaluation AST was developed and applied to Nafion XL for review. In order to shorten the evaluation time, oxygen was used as a cathode gas instead of air, and it was finished in 144 hours. Since DOE AST has a large number of voltage changes with 45 seconds of humidification and 30 seconds of drying, the degradation of the electrode has more influence on the MEA durability. Therefore, one cycle time was lengthened with 60sec of wet/300sec of dry, and the drying time was made longer than the humidification time to further deteriorate the polymer membrane, and it was finished in 240 hours. It was confirmed that the DOE AST for evaluation of the durability of the polymer membrane was accompanied by electrode degradation.

• Quality Improvement in Health Care
• /
• v.2 no.2
• /
• pp.20-30
• /
• 1996

Background : Theoretically as the waiting-time of patient is estimated in queueing, many men and much money are needed. But being the estimation of patient s waiting-time very important in hospital service, so the continuous monitoring of waiting-time is inevitable. To verify that the estimation of waiting-time using parking time is economical, effective and continuous monitoring method and to develop utilizing the method, this study was done. Method : In parking confirmation office, the personnel of parking office wrote parking confirm time, chart number and whether medical examination and treatment finish or not in parking ticket. The next day the parking tickets were gathered and the above data were input. The input parking data were connected with the hospital outpatient file indexing chart number. Then the patient' s data for department, new patient or not, reservation or not, receipt time and payment time were retrieved. The group for finishing medical treatment were compared with that for not finishing in average time lag between confirmation and out-time for hospital. And In-time for hospital, receipt time, payment and out-time for hospital were also analyzed. Result : Confirming parking ticket, the group for finished medical treatment left hospital after 7 minutes. This result showed that the patient for finished medical treatment left hospital immediately. So parking time was reasonable to estimation of hospital-time was concluded. The time for medical treatment, diagnosis and test was constant for all patients and short for waiting time, Then I concluded that the parking time was reasonable for estimation patient's waiting time. Overall patient's waiting time was 113 minutes and new patient's time was 149 minutes, old patient's times was 109 minutes. Waiting time for reservation patient was 98 minutes and for non reservation patient was 122 minutes. The time from hospital arrival to payment was 50 minutes for the group of reservation patient and 69 minutes for non-reservation group. The time from payment to hospital leaving was 51 minutes and 56 minutes for non reservation group. The short time difference between reserved group and not reserved group from payment to hospital leaving time was due to bottle neck effect. Conclusion : The estimation of patient's waiting time using parking time was reasonable because the possession of car was common and the time for medical treatment was equal and the patient after treatment left hospital immediately. Using this method, timely, fast evaluation and continuous monitoring of the intervention effect were possible.

• Journal of Pharmacopuncture
• /
• v.13 no.4
• /
• pp.109-118
• /
• 2010

Objectives : This pilot study is designed to reveal the effect of Carthami-semen acupuncture treatment on chronic daily headache. Methods : 1. All the voluntary subjects were diagnosed as CDH. 2. Carthami-semen acupuncture is applied 2 times a week for 4 weeks. 3. The patients were assessed by Headache impairment test score(HIT), Short Form 36 (SF-36) Health Survey, and Headache Free Days(HFD) before and after 4 weeks treatment, and two weeks the treatment finished. Results : The result were as follows ; 1. HIT score decreased from $65.3{\pm}5.5$ to $53.1{\pm}9.4$, and furthermore declined to $49.5{\pm}8.0$ after 2 weeks the treatment finished. 2. HFD increased from 19.1% to 31.5% during the treatment time. Moreover it showed continuous effectiveness after 2 weeks the treatment finished. 3. SF-36 showed significant improvement on all of the QOL items. Conclusions : This pilot study suggests that Carthami-semen acupuncture treatment has an effect on the CDH patients.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.3 s.35
• /
• pp.216-221
• /
• 1990

This study was performed for the development of antimicrobial finished nonwoven fabrics with water repellency. And it was aimed to examine the changes of moisture related properties and air permeability of the finished fabrics. Viscose rayon nonwoven fabrics were treated with organic silicon quaternary ammonium salt having carbon numbers of 16, which was synthesized for this study Antimicrobial activity was evaluated by shake flask method and the reactivity of antimicrobial agent was measured by degree of luminescence from inductively coupled plasma. Water repellency of treated specimen was evaluated by dynamic water absorption measurement and air permeability was measured by Frazier method. The results obtained from this study were as follows: 1. Excellent antimicrobial activity was obtained for the high concentration of treatment and the durability of finishing after laundering was better as the treatment concentration was higher 2. Silicon contents taken up by specimen increased with increased treatment concentration. 3. Dynamic water absortion of treated specimen decreased compared to that of untreated. And, it was lowered as the treatment of concentration increased and as the silicon content increased. 4. Moistuie regain and uptake with lapse of time of treated specimen increased compared to those of untreated. But, air permeability of treated specimen decreased.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.46.3-46.3
• /
• 2009

The SAR (Synthetic Aperture Radar) satellite has the advantage of implementing the imaging mission even though it is night time, cloudy weather, and all weather conditions, which is different from the satellite with the optical payload. This is the reason why the SAR satellite comes into the spotlight in the observation satellite field. The Korea Aerospace Research Institute (KARI) has been developing the first Korean SAR satellite and is currently integrating and testing the Flight Model. For the launch vehicle service, KARI finalized the selection of the launch vehicle service provider and finished Critical Design Review (CDR) of the interface between the bus and the launch vehicle. KARI and launch vehicle service provider also finished the test of the telemetry interface between the bus and the launch vehicle. The test of the telemetry interface has the purpose of checking the interface of the telemetry which is the SOH(State-of-Health) of the satellite in an early launch stage. For this test, KARI has finished the development of the spacecraft simulator which is composed of the bus simulator to generate the analog telemetry and the launch vehicle simulator to gather the telemetry. In this research, the result of the hardware implementation and the software implementation for the spacecraft simulator were described. Finally the results of the launch vehicle telemetry MUX test which were performed at the launch vehicle provider's design office by using the spacecraft simulator were summarized. It is expected that this simulator will be used in the next test after the manufacture of the launch vehicle.

• Journal of Welding and Joining
• /
• v.23 no.6
• /
• pp.99-105
• /
• 2005

The mixing ratio effect of the GTD-111(base metal) powder and the GNI-3 (Ni-l4Cr-9.5Co-3.5Al-2.5B) powder on TLP(Transient Liquid Phase) bonding phenomena and mechanism was investigated. At the mixing ratio of the base metal powder under $50wt\%$, the base metal powders fully melted at the initial time and a large amount of the base metal near the bonded interlayer was dissolved by liquid inter metal. Liquid insert metal was eliminated by isothermal solidification which was controlled by the diffusion of B into the base metal. The solid phases in the bonded interlayer grew epitaxially from the base metal near the bonded interlayer inward the insert metal during the isothermal solidification. The number of grain boundaries farmed at the bonded interlayer corresponded with those of base metal. At the mixing ratio above $60wt\%$, the base metal powder melted only at the surface of the powder and the amount of the base metal dissolution was also less at the initial time. Nuclear of solids firmed not only from the base metal near the bonded interlayer but also from the remained base metal powder in the bonded interlayer. Finally, the polycrystal in the bonded interlayer was formed when the isothermal solidification finished. When the isothermal solidification was finished, the contents of the elements in the boned interlayer were approximately equal to those of the base metal. Cr-W borides and Cr-W-Ta-Ti borides formed in the base metal near the bonded interlayer. And these borides decreased with the increasing of holding time.

• International Journal of Computer Science & Network Security
• /
• v.22 no.12
• /
• pp.205-211
• /
• 2022

Performing the rituals of Hajj and Umrah is an obligation of Allah Almighty to all Muslims from all over the world. Millions of Muslims visit the holy mosques in Makkah every year to perform Hajj and Umrah. One of the most important pillars in Performing Hajj/Umrah is Tawaf and Sa'ay. Tawaf finished by seven rounds around the holy house (Al-Kabaa) and Sa'ay is also seven runs between As-Safa and Al-Marwa. Counting/knowing the number of runs during Tawaf/Sa'ay is one of the difficulties that many pilgrims face. The pilgrim's confusing for counting (Tawaf/Sa'ay) rounds finished at a specific time leads pilgrims to stay more time in Mataff bowl or Masa'a run causing stampedes and more crowded as well as losing the desired time for prayers to get closer to Almighty Allah in this holy place. These issues can be solved using effective crowd management systems for Tawaf/Sa'ay pillars, which is the topic of this research paper. While smart devices and their applications are gaining popularity in helping pilgrims for performing Hajj/Umrah activities efficiently, little has been dedicated for solving these issues. We present an autonomous Mobile-based framework for guiding pilgrims during Tawaf/Sa'ay pillars with the aid of GPS for points tracking and rounds counting. This framework is specially designed to prevent and manage stampedes during Tawaf/Sa'ay pillars, by helping pilgrims automatically counting the rounds during Tawaf/Sa'ay with supported Supplications (in written/audio form with different languages) from the Quran and Sunna'a.

• The Korean Journal of Pesticide Science
• /
• v.19 no.2
• /
• pp.106-112
• /
• 2015

This experiment was carried out to investigate the best spray timing for the control of the bacterial shot hole with Bordeaux mixture (6-6) after wintering in the peach orchard. We sprayed Bordeaux mixture (6-6) on 'Mibaekdo', 'Yumyeong' and 'Cheonhong' of peach verities from late-March to mid-April in 2001, 2002 and 2014, and examined how much bacterial shot hole and chemical injure occurred. The infection rate of bacterial shot hole according to spray time was 10.2 to 11.7% at leaves, and 1.7 to 2.2% at fruits in 2002. And Efficacy of the Bordeaux mixture treatment for control of bacterial shot hole at full blooming time 21.2 to 30.4% at leaves, 1.7 to 4.4% at fruits in 2014. The chemical injure occurred slightly for one week hence. The fruit bearing rate was 20.7 to 29.8% at 'Mibaekdo', and 35.4 to 61.9% at 'Yumyeong' peach trees. When the spray at the time of blooming period by bordeaux mixture was investigated the control effect of bacterial shot hole disease. The infected leaves was better than 21 to 25% twice the quantity of finished products and bordeaux self-preparation about 28 to 30% base quantity of finished products, also the control efficacy was higher in infected fruits trends in bordeaux self-preparation method and twice the quantity of finished products.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.3
• /
• pp.147-154
• /
• 2016

This paper suggests a specific model that could efficiently improve the interaction and the interface between MES(Manufacturing Execution System) server and PDA terminal through RFID(Radio Frequency Identification) system and bar-code system in automative transmission shipment place of the finished assembly parts. The proposed model shows that the new method by RF-Tag system can more efficiently perform to reduce processing time and loading time for shipment, compared with the current approach by bar-code system. It is noted in case of the method by RF-Tag that the effects of proposed model are as follows; (a) While the shipping lead time per truck for carrying by the current method was 35 minutes, the shipping lead time by the new method was 15 minutes. (b) While the accuracy for carrying by the current method was 50%, the accuracy by the new method was 99%.