• Korean Journal of Human Ecology
• /
• v.18 no.2
• /
• pp.341-351
• /
• 2009

This study shows that Art therapy has positive effects on ADHD child's problem behavior and child relationship. Also we want to provide more data to education field. We work with 3 children. They are recommended by their class teacher and they are attending J elementary school which is located in K city in Chunbuk. The experiment period was 7 weeks - 2 times a week, total is 14th- and each time required was 40-60 minutes when they finish their school. Since we want to see each ADHD child's results, we use ADHD teacher evaluating measure and Child relationship measure to compare the results after the fact. The results are Art therapy has positive effects on the ADHD child's problem behavior specially concentration, excess behavior, social skill, hostile behavior and aggregation with same ages, sociality, lack of sociality, exclusive, unstable, and hypersensitiveness.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.4
• /
• pp.153-158
• /
• 2017

When considering the proper function and life cycle length of a product, its surface finish plays an important role. This experimental study was carried out to understand the effect of input factors on surface roughness and how it can be minimized by controlling the input parameters. This experimental work was performed by machining the surface of STD 61 blocks with a surface inclined at $30^{\circ}$ by ball end-milling and optimizing the input parameters using the Taguchi technique. Signal-to-Noise (S/N) ratio and analysis of variance (ANOVA) were applied to find the significance of the input parameters. The optimum level of input parameters to minimize surface roughness was obtained.

• Journal of Communications and Networks
• /
• v.10 no.1
• /
• pp.79-88
• /
• 2008

In this paper, we propose efficient peer assignment algorithms for low-latency transmission of scalable coded images in peer-to-peer networks, in which peers may dynamically join and leave the networks. The objective of our algorithm is to minimize the transmission time of a requested image that is scalable coded. When an image is scalable coded in different bit rates, the bit stream encoded in a lower bit rate is a prefix subset of the one encoded in a higher bit rate. Therefore, a peer with the same requested image coded in any bit rate, even when it is different from the requested rate, may work as a supplying peer. As a result, when a scalable coded image is requested, more supplying peers can be found in peer-to-peer networks to help with the transfer. However, the set of supplying peers is not static during transmission, as the peers in this set may leave the network or finish their transmission at different times. The proposed peer assignment algorithms have taken into account the above constraints. In this paper, we first prove the existence of an optimal peer assignment solution for a simple identity permutation function, and then formulate peer assignment with this identity permutation as a mixed-integer programming problem. Next, we discuss how to address the problem of dynamic peer departures during image transmission. Finally, we carry out experiments to evaluate the performance of proposed peer assignment algorithms.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.60-64
• /
• 2013

Water injection pump produced the 1st oil well through the high pressure after the Deep water oil well drilling. After finish the work it is hard to produce only using itself pressure due to low pressure. Therefore it can be increased recovery factor through the injection seawater of high pressure. Is the key equipment used in the marine plant and it is developing at many industries. In this paper, Analyze changes in the natural frequency due to the stiffness of the bearing. Analyze the critical speed of the natural frequency due to the change of operation speed. And evaluate the Stability. And then analyze the displacement and clearance through the unbalance response this way has contributed to the reliability of the developing product. Through a mathematical analysis.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.2
• /
• pp.66-72
• /
• 2007

Surface finishing using magnetorheological (MR) fluid is useful to finish small but not too small workpieces such as those in a few millimeter scale. However, due to the high surface hardness, this finishing process does not seem to be suit for applying to a hard disk slider. In this work, a preliminary study is performed on the finishing of the hard disk slider surface with a mixture of an MR fluid and diamond powder. During a wheel type MR finishing process, centrifugal force is found to be a major factor to cause a reduction in material remove rate (MRR), which is supported by a theoretical model. To facilitate this founding, the rotational speed of tool is confined to 500rpm while a rectilinear alternating motion with the mean speed, which is equivalent to the rotational speed, is additionally applied to the workpieces. As a consequence, MRR of about 2 times of the sole rotational case is obtained. This paper shows that MR finishing process can be used to polish a hard material in millimeter scale efficiently by controlling the speeds of the tool and the workpiece.

• Applied Science and Convergence Technology
• /
• v.25 no.6
• /
• pp.120-123
• /
• 2016

The rotor of a turbomolecular drag pump is generally made of an aluminum alloy. Its surface finish is affected by various processes that the rotor itself undergoes during the manufacturing phase. The impact of different surface finishes on the pumping performances of a turbomolecular pump has been mainly investigated by Sawada et al [1]. The present work aims to broaden the previous bibliographic study to the drag stages of a turbomolecular pump by testing the impact of different surface finishes on the compression ratio of the pump. Experimental tests have been made focusing on two processes: the corundum sandblasting and the glass microspheres shot-peening. Both the processes flatten and/or physically remove EDM melted spheres; in particular, blasted surfaces obtained by glass shot-peening are generally smoother than surfaces obtained by corundum sandblasting. In order to characterize the surface texture left by such processes, preliminary surface roughness measurements have been made on the drag rotor disks of several pumps. The experimental tests conducted on both sandblasted and shot-peened rotors confirms previous results obtained on the turbo stages by Sawada et al. [1], showing that the average roughness of the surface has an impact on the compression ratio of the pump; in particular, an increment in the surface roughness causes a corresponding increment in the compression ratio of the pump and vice versa. For the tested pumps, the higher surface roughness gives a factor of increment of about 2 on the measured hydrogen maximum compression ratio of the pump.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.165-166
• /
• 2015

Due to the international economic downturn and the increasing competition, container terminals have been trying to achieve cost effectiveness and high service levels. Shipping companies want to get better services from container terminals but container terminals only have limited space and equipment. Frequently, too many external trucks come to the terminal at the same time, and create bottle necks at the terminals. Ouside the container terminals traffic jams occur as well. As a result, stakeholders need a vehicle booking system. By VBS, container terminals can plan efficiently in advance to avoid work delay and the truck drivers can finish their jobs quickly. This paper aims to search efficient models for the container terminals by using VBS.

• KIEAE Journal
• /
• v.9 no.1
• /
• pp.69-76
• /
• 2009

The use of natural light can improve the quality of indoor environment and also occupants health. In recent years, with an increasing awareness of sustainable development, various innovative methods of integrating daylight into the building have been developed. One such device is the light pipe system. The light pipes are innovative daylighting system that allow the transmission of daylight into the hard-to-reach indoor space. The system consist of mainly three parts. First, a top collector which is mounted on the outside of the roof and gathers skylight and sunlight. Second, light-reflective tube which is coated with highly reflective mirror finish material to transmit the daylight into the diffuser. Third, a diffuser which is installed on the ceiling in the room and spread the daylight into the room. Light pipes have been widely used and researched in many countries such as Australia, America, Canada and Britain. However, despite the significant daylight potential, little work have been carried out in Korea compare to the other countries. In this study, recent lighting technology and application of light pipe system in both Korea and other countries have been compared. For the results, the benefits of each light pipe system and suitable application in Korea is also discussed.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.428-432
• /
• 1999

As metallic surface has its unique lustrous appearance and optical reflectance in visible range of light, the metallization of plastic surface has been an essential drive toward weight reduction for fuel economy and decorations in transportation industry and has been put into practiced from wet chemical-electrochemial to dry vacuum process in view of an environmental effect. Electron-beam metallization was used in this work with an aim at improving the scratchproof surface hardness of plastic substrate with metallic finish character. Thin film of Al ($1000\AA$) and $SiO_2$($7000\AA$) were metallized on substrate of PC and PMMA and the films were evaluated by pencil test for surface hardness and by cross-cut tape test for adhesion. The ion beam treatment improved around twice as hard as non-treat surface. The ion beam is effect on its hardness and adhesion to surface hardened PC substrate.

• Structural Engineering and Mechanics
• /
• v.73 no.5
• /
• pp.501-513
• /
• 2020

In the present work, the optimization of machining parameters to achieve the desired technological parameters such as surface roughness, tool radial vibration and material removal rate have been carried out using response surface methodology (RSM). The hard turning of EN19 alloy steel with coated carbide (GC3015) cutting tools was studied. The main problem faced in manufacturer of hard and high precision components is the selection of optimum combination of cutting parameters for achieving required quality of surface finish with maximum production rate. This problem can be solved by development of mathematical model and execution of experiments by RSM. A face centred central composite design (FCCD), which comes under the RSM approach, with cutting parameters (cutting speed, feed rate and depth of cut) was used for statistical analysis. A second-order regression model were developed to correlate the cutting parameters with surface roughness, tool vibration and material removal rate. Consequently, numerical and graphical optimization were performed to obtain the most appropriate cutting parameters to produce the lowest surface roughness with minimal tool vibration and maximum material removal rate using desirability function approach. Finally, confirmation experiments were performed to verify the pertinence of the developed mathematical models.