• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.51-58
• /
• 2006

The effluent limitations for individual industry based on the best available technology economically achievable (BAT) have been required to achieve effective regulation. BAT assessment criteria that are suitable for the circumstances of Korean industry were developed in the previous study. The criteria were applied to determine the BAT for leather tanning and finishing industry. For the evaluation BAT, a subcategorization for the industry considering wastewater characteristics, source equipments, raw material and so on should be suggested. Three subcategories: A) Unharing, Chrome Tan, Retan-Wet Finish, B) Chrome Tan, Retan-Wet Finish, and C) Furskins were proposed in this study. Wastewater discharged from the each category contains high concentration of COD, chrome, nitrogen and sulfide. In particular, the concentration of nitrogen from the subcategory A is significantly greater. Twenty sites were surveyed and wastewater qualities were analyzed. Therefore, six different technologies were applied to the subcategory A for the end-of-pipe treatment technology, and a technology was used in the subcategory B and C, respectively. The technology candidates were evaluated in terms of environmental impacts, economically achievability, treatment performance and economical reasonability. As the result, the technology options for each subcategories: A) primary chemical precipitation + modified Ludzack-Ettinger process (MLE) + secondary chemical precipitation, B) chemical precipitation + typical activated-sludge process + Fenton oxidation, C) chemical precipitation + typical activated-sludge process + batch Fenton oxidation or batch activated carbon treatment were selected as the BAT, respectively.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.2
• /
• pp.169-181
• /
• 2009

The purpose of this study was to provide basic information for developing a smart taekwondo uniform with enhanced functionality for children by investigating the wearing condition and satisfaction of taekwondo uniform among taekwondo training children. The data were collected from 162 children living in Seoul and Daegu. For data analysis were performed descriptive statistics, ${\chi}2$ -test and t-test using SPSS Ver. 12. The results of the analysis are as follows. The results revealed that respondents wearing the general training uniform during their training period were the most. The dissatisfaction for the general training uniform was a high price, lack of symbolic, lack of functionality in textiles, lack of variety in design and unfittness of size in order. The developed uniform can adjust the length using a zipper type fastener, and can be used in all seasons as the lining is detachable. It also uses nano-silver material, and soil release finish. It enhances the functionality of movement by treating with raglan sleeve and sleeve hem velcro tape, and designs the upper garment in the draping. Safety is improved through attaching GPS, and elastic material is mixed in the neckline for putting on and off easily. Piece of cloth is added inside the closing of the upper garment. Rings are made for fixing the taekwondo uniform belt. Pocket is designed in the lower garment and colors are multiplied.

• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.87-91
• /
• 2008

It is commonly known that water repellency of the fabric treated with fluorocarbon resin brings about a decrease by the washing and recovers by the subsequent heat treatment. In this article, effect of the water repellency was investigated on the nylon 6, triacetate and silk fabrics treated with hydrocarbon and silicon resins. Hydrocarbon and silicon resins have been widely used in the textile finishing as the softening and water proofing agents. The fabrics were treated with hydrocarbon resins, Paragium JQ and RC (Ohara Paragium Chemical Co.) and a silicon resin, Poron MR (Shinetsu Chemical Co.), and then washed and subsequently heat treated. Although the water repellency increased by the resin treatment, it decreased by the washing apparently and recovered a little by the heat treatment. The effect of the heat treatment was small comparing with that of the fluorocarbon resin. Furthermore, as a mechanical property of the treated fabric, KES shearing and bending hysteresis parameters, modulus and hysteresis width of the hydrocarbon resin-treated nylon 6, triacetate and silk fabrics decreased by the heat treatment after washing. Therefore, the treatment is effective at improving the softening of the fabric in water repellent finish.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.4
• /
• pp.382-385
• /
• 2011

There is an immense need to obtain nanometric surface finish on optical glass owing to the advantage of improved performance of the components. But owing to brittleness and hardness, optical glass is one of the materials that is difficult to ultra-precision turning. According to the hypothesis of ductile mode machining, regardless of their hardness and brittleness, will undergo a transition from brittle to ductile machining region below a critical undeformed chip thickness. Below this threshold, it is suggested that the energy required for plastic formation. Thus, plastic deformation is the predominant mechanism of material removal in machining these materials in this mode. An experimental study is conducted diamond cutting for machining BK7 glass. The investigation presents the feasibility of achieving nanometric surface and the understanding the mechanism of cutting glass, proving the cutting edge radius effect.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.696-700
• /
• 2007

In case of dome-typed gymnastics training floor, since its form takes shape of the focus of sound, in the occasion when the finishing-material was used with the sandwich panel that prominent in reflexibility, and because the reverberation of sound in indoor is too loud, a smooth practice and teaching is very difficult. As this indoor gymnastics training floor, standing at its character, is required simultaneously the idea communication between the player and the coach, and the acoustic capability regarding to the clearness of music, besides the sport activity, the method to minimize the acoustic defect should be urgently contrived from the stages of design and beginning of construction. On this viewpoint, after investigation on the confidence of the surveyed value and the estimated value using acoustic simulation, and use of the changed finish-material, this thesis intends to design the dome-typed gymnastics training floor that secured the optimized acoustic condition. It is also considered that such result of the study could be utilized as the useful data that enables to improve the retrenchment effect of the construction cost as well as the acoustic performance, by means of the prediction control on the acoustic problem from the stage of design, for the occasion when the similar indoor sport gymnasium is planning to build for the near future.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.8 s.179
• /
• pp.1958-1967
• /
• 2000

Rapid Prototyping( RP ) has been increasingly applied in the process of design and development of new products. RP can shrink the time and expense required to bring a new product from initial concept to production. However, the necessity of using RP for short-run manufacturing is continuously driving a development of a cost-effective technique that will produce completely-finished quality parts in a very short time. To meet these demands, the improvements in production speed, accuracy materials, and cost are crucial. Thus, a new hybrid-RP system performing both deposition and machining in a station is proposed in this paper. It incorporates both material deposition in layers and material removal from the outer surface of the layer to produce the required surface finish. The new hybrid-RP system can dramatically reduce the total build time and fabricate largo-sized and freeform objects because it uses very thick layers, i.e.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.6
• /
• pp.486-492
• /
• 2006

In this research, IAQ is measured to evaluate the emission performance of VOCs in three new apartment houses finished by totally EFMs (Environmental Friendly Material), partially installed EFMs and general materials. Among various VOCs, Target pollutants for the IAQ measurement are benzene, ethylbenzene, toluene, xylene, 1,4-Dichlorobenzene and formaldehyde. The measurement is conducted one day after each interior finishing material is worked over by construction schedule. The result of this research concluded that (1) Except toluene, the concentration levels of each pollutant did not exceed the national IAQ standards in all test residences, (2) As the interior finishing work schedule, A toluene level peaked when the furniture installing was ended. (3) The toluene concentration level of the house installed general interior materials as the non-EFMs furniture was one and half higher than other houses. Consequently, installing. the furniture made by EFMs is one of effective methods to improve the IAQ for new apartment houses.

• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.434-445
• /
• 2014

The meaning of this research is to make recognition for necessity of ergonomic fashion design research. And the purpose is to provide the guidelines for ergonomic fashion product development. For this, literature research and analysis of empirical illustration of product design indicating ergonomics characteristic are implemented. Among the body-conscious active sportswear, cycle wear, swim suit, and skin scuba wet suit were selected and analyzed. Then they were explained according to the ergonomics characteristics arranged previously. Lastly, the features of ergonomic fashion design were arranged by composition elements of the clothing such as pattern, sewing, material and detail. The characteristics of ergonomic design derived from literature and advanced researches are efficiency, usability, functionality and safety. Through research and analysis, the characteristics of ergonomic fashion design are as followings. In pattern, it is related to the 3D structure division pattern, the reduction pattern design, the closing & opening part design for easy detachment, the receipt and the changeable design. In sewing, it is related to the use of latest sewing techniques and the finish using silicon or rubber band. In material, it is related to the use of high performance fabrics and the proper arrangement of these. In detail, it is related to the convenient detail, the storage detail, the adjustable detail, and the body protection detail.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1997.11a
• /
• pp.193-200
• /
• 1997

Flame spread and heat release properties and incident heat flux of interior materials subject to an igniter heat flux in a compartment are investigated and compared by using computer model. A comer fire ignition source is maintained for 10 minutes at 100 kw and subsequently increased to 300kw. In executing the model, base-line material properties are selected and one is changed for each run. Also 4 different igniter heat flux conditions and examined. Results are compared for the 12 different materials tested by the ISO Room Comer Test (9705). The time for total energy release rate to reach 1MW is examined. The parameters considered include flame heat flux and thermal inertia, lateral flame spread parameter, heat of combustion and effective heat of gasfication. The model can show the importance of each property in causing fire growth on interior Hnish materials in a compartment. The effect of ignitor heat flux and material property effects were demonstrated by using dimensionless parameters a, b and Tb. Results show that for b greater than about zero, flashover time in the ISO Room-Corner test is principally proportional to ignition time and nothing more.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.346-351
• /
• 2006

Community facilities in apartment complex was developed through combination with residents' needs about housing environmental amenity, marketing competition among construction companies and social trend 'Well-being' . But community facilities and fitness center which are situated in the beginning are alienated by residents because the designers plan community facilities without considering about residents' life-style and preference. In this paper, the study includes present status of fitness center and residents' preference for proper fitness center design. The result presents that fitness center users in apartment complex want a resting space which is already located in fitness center of mixed-use residential building. A resting space provides conditions that users can make up with the community each other as well as they can rest after exercise. And the fitness center users prefer wood as interior finish material of floor and wall in exercising space and resting space because they have a feeling comfortable and splendid.