• 한국공작기계학회논문집
• /
• 제13권3호
• /
• pp.8-15
• /
• 2004

A significant error in the end milling processes is generated due to using slender tools of which the strengths are not sufficient. In order to obtain the desired machining accuracy, therefore, it is general that at first the rough cut is implemented, then the finish cut is followed. The rough cut eliminates large volume and the finish cut does the remained part. This remaining portion after the rough cut is called as the finish allowance. Larger finish allowances make it hard to get precise dimensions at a following finish cut. Smaller finish allowances are helpful for good dimension, but it sometimes is responsible for inferior surface qualities and over cuts. This study suggests a guidance for the optimum finish allowance for machining accuracy improvement, in which the rough cuts are regulated to remain the desired margins without any over cuts. Some experiments were carried out with various cutting conditions including the change of tool strengths and depth of cuts, and also extended to up millings as well as down millings.

• 한국주거학회논문집
• /
• 제25권2호
• /
• pp.121-130
• /
• 2014

This paper provides a social knowledge for pragmatic application guidelines of the interior finish materials within apartment houses, based on both the awareness of practitioners and as it applies to the realities. For this purpose, a series of the questionnaires survey on the awareness of interior finish materials in recently-constructed and remodeled apartment houses was performed, which has extended its probe into the awareness of architectural practitioners. The questionnaires asked practitioners how much they desire sustainable finish materials and the difference in various parties were analyzed and compared, formulating the pragmatic solution in the determination of interior finishes. Comparative analysis of the awareness of construction specialists, interior designer, architectural environmental researchers on environment-friendly finish materials showed that all parties were right to recognize the significance of sustainability in interior finishes. Practitioners believed that occupants must bear the additional expense for the environment-friendly finish products. Also, the results tell that the amount used of environment-friendly products increases as expertise on sustainability in interior finishes rises.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.35-36
• /
• 2017

The finish works of construction projects comprises approximately 40% of the total construction duration. Thus, the management of finish works have as big as impacts on total project duration as the earthworks, foundation and structure works. Process interference management is considered one of the most important issues dealt during finish works. However, it was investigated that effective management systems have yet not been applied for practical use. Accordingly, this paper suggests a mobile technology based finish works management system that mainly focuses on preventing process interference occurred due to ineffective communication between general and sub-contractors.

• 한국실내디자인학회논문집
• /
• 제25권5호
• /
• pp.121-129
• /
• 2016

With the ingenious properties of unconstrained formativeness and frank expression of materiality the exposed concrete became popular with numerous architectures. The application of the exposed concrete has expanded to indoor environments such as commercial and residential spaces beyond the building exteriors with the uncompromising nature of its materiality. The purpose of this study is to conduct sensibility evaluation of the exposed concrete finish in interior spaces. The sensibility evaluation is conducted through a survey on a set of space models of the exposed concrete finish. The three rendered space models were evaluated by emotional vocabulary of 18 pairs of words. The result were as follows: First, the emotions derived from the exposed concrete finish are 'modern', 'cold', 'simple', 'restrained', 'rough', 'dark', 'new', 'chic', 'familiar' and 'eco-friendly'. Second, three sets of space models with alternative materials on walls and floors in exposed concrete interior space showed clear difference in sensibility. A space with the exposed concrete finish on the floor, the walls and the ceiling showed the results of 'cold', 'dark', 'rational' and 'masculine'. In the exposed concrete finish environment with wood flooring 'comfortable', 'warm', 'bright' senses and with white paint finish on the wall 'bright', 'practical', 'ordinary' and 'restrained' senses were obtained. Third, all three images achieved senses of 'chic', 'modern', 'new', 'pleasant', 'environment friendly' and 'satisfactory'. The modernity and stylish expressions of the exposed concrete finish were kept with the application of different material finishes as well as complementing its cold and rough expressions with warmth and brightness.

• 한국실내디자인학회논문집
• /
• 제23권6호
• /
• pp.70-77
• /
• 2014

The purpose of this study is providing a usage of exterior, interior finish materials and color scheme for architectural design and the actual texture and pattern plans of finish materials from Le Corbuisier's work, Chapel Ronchamp. Chapel Ronchamp was analyzed to support the study for the interaction between texture usage and color expression. As a powerful design tool, texture, pattern and color of finish materials are very effective to alter the perception of the facade in the building. Most of architectural buildings, shapes and materials of elevations are monotonous and uniform. This study should be considered by details in the elevation of Chapel Ronchamp. As the part for developing and planning of architectural design, researching color plans and finish material is very important on real expression in the architectural space. As a result, this study will benefit in planning both the exterior and interior environments of color and finish material with texture and pattern.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.125-129
• /
• 2010

The ultimate goal of construction is to complete the given work in the most economical and safest way within the required construction period while meeting the quality standards specified in the design drawing. There are a few characteristics of finish work. First, executed in subdivided processes, finish work involves a very diverse and complex structure. Second, there are no criteria for each segmented process with regard to the appropriate time of input. Third, it is not very necessary to set priorities for lead and lag works. This study intends to provide information on the completion of a project in accordance with the required duration by setting priorities in the delay of each detailed process of finish work to minimize delay in finish work. In this study, finish work is divided into wet work and other types of finish work, and the importance of each process is classified based on the given details of each process. In addition, the study employs a survey to analyze delay factors of a designer, a constructor, and a supplier. Using the survey results, the study sets priorities in delay of final work to provide information on the completion of an apartment project within the planned construction period.

• 대한금속재료학회지
• /
• 제46권2호
• /
• pp.80-87
• /
• 2008

Many researches related to the reliability of Pb-free solder joints with PCB (printed circuit board) surface finish under thermal or vibration stresses are in progress, because the electronics is operating in hash environment. Therefore, it is necessary to assess Pb-free solder joints life with PCB surface finish under thermal and mechanical stresses. We have investigated 4-points bending fatigue lifetime of Pb-free solder joints with OSP (organic solderability preservative) and ENIG (electroless nickel and immersion gold) surface finish. To predict the bending fatigue life of Sn-3.0Ag-0.5Cu solder joints, we use the test coupons mounted 192 BGA (ball grid array) package to be added the thermal stress by conducting thermal shock test, 500, 1,000, 1,500 and 2,000 cycles, respectively. An 4-point bending test is performed in force controlling mode. It is considered that as a failure when the resistance of daisy-chain circuit of test coupons reaches more than $1,000{\Omega}$. Finally, we obtained the solder joints fatigue life with OSP and ENIG surface finish using by Weibull probability distribution.

• Tribology and Lubricants
• /
• 제16권4호
• /
• pp.253-258
• /
• 2000

Frictional behavior of wire electric discharge machined surfaces of spheroidized annealed STDll steel was investigated. The surfaces were produced with a various series of finish cuts where pulse energy was reduced with increase in the number of finish cuts. Roughness and micro-hardness of the surfaces were also measured. It is observed that the increase in the number of finish cuts produces the surface exhibiting lower frictional resistance followed by higher resistance after considerable wear. Effects of finish cuts on the friction characteristics are discussed with the aid of roughness and micro-hardness of the surfaces.

• 한국기계가공학회지
• /
• 제7권3호
• /
• pp.55-60
• /
• 2008

Until a recent date, the surface finish generated in turning by the conventional cutting tool is directly related to the feed rate and the size of the tool nose radius. With this tool a large feed rate will give poorer surface finish and a large nose radius will generate a better surface finish. Recently a new concept in the tool design is introduced to achieve a better surface finish at a higher feed rate. This is the wiper tool, which has the portion of nose with infinite radius. This can remove the ridges left when the conventional tool is used. In this study two series of cutting tests with the wiper tool and the conventional tool are carried out under the various cutting conditions of cutting depth, feed rate and cutting speed. The effects of the wiper design and the cutting conditions on the surface roughness resulted are carefully examined and compared.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.429-434
• /
• 2008

The objective of this paper is to introduce a project on developing Finish Drawing Automation System. The system aims to improve efficiency of the BIM-based estimation, which is realized by automatic derivation of three-dimensional geometry models of the finish details. First, overall workload differences between the drawing-based estimation methods and the BIM-based methods are analyzed. Second, an automated finish detail design method is proposed as a time-saving measure for the BIM-based estimation, as manual modeling accounts for the most time spent in the model-based estimation process. Finally, the proposed system is evaluated using a case of washboard design.