• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1174-1177
• /
• 2003

In this study, to achieve the optimal conditions for mechanical hyper-fine pattern fabrication process, deformation behavior of the materials during indentation was studied with numerical method by ABAQUS S/W. Polymer (PMMA) and brittle materials (Si, Pyrex glass) were used as specimens, and forming conditions to reduce the elastic recover and pile-up was proposed. The indenter was modeled a 3D rigid surface. Minimum mesh sizes of specimens are 1-10nm. Comparison between the experimental data and numerical result demonstrated that the finite element approach is capable of reproducing the loading-unloading behavior of a nanoindentation test. The result of the investigation will be applied to the fabrication of the hyper-fine pattern.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• v.26 no.1
• /
• pp.15-29
• /
• 1998

The numerical simulation of heavy precipitation event occurred in the central Korean Peninsula on July 26-28, 1996 was performed using the fine mesh model. ARPS (Advanced Regional Prediction System) developed by the CAPS (Center for Analysis and Prediction of Storms). Usually, the heavy rainfalls occurred at late July in the Korean Peninsula were difficult to predict, and showed very strong rainfall intensity. As results, they caused a great loss of life and property. As it usual, this case was unsuccessful to predict the location of rain band and the precipitation intensity with the coarse-mesh model. The same case was, however, simulated well with fine-mesh storm-scale model, ARPS. Moisture band at 850 hPa appeared along the Changma Front in the area of China through central Korea passed Yellow Sea. Also the low-level jet at 700 hPa existed in the Yellow Sea through central Korea and they together offered favorable condition to induce heavy rainfall in that area. The convective activities developed to a meso-scale convective system were observed at near the Yangtze River and moved to the central Korean Peninsula. Furthermore, the intrusion of warm and moist air, origninated from typhoon, into the Asia Continent might result in heavy rainfall formation through redistribution of moisture and heat. In the vertical circulation, the heavy rainfall was formed between the upper- and low-level jets, especially, the entrance region of the upper-level jet above the exit the region of the low-level jet. The low level convergence, the upper level divergence and the strong vertical wind were organized to the very north of the low level jet and concentrated on tens to hundreds km horizontal distance. These result represent the upper- and low-level jets are one of the most important reasons on the formation of heavy precipitation.

• Economic and Environmental Geology
• /
• v.19 no.spc
• /
• pp.227-237
• /
• 1986

The Duk-Eum mine located in Kongsan-myeon, Naju-gun, Cheolanamdo is producing silver ore mainly, with rare gold association. The grade-up and recovery of the concentrates have been concerned to the main problem. And then, this study aimed at applying the basic data for ore processing. In the first half of the study, the attempts were made to identify the ore minerals, this followed by determination of the mineral texture, paragenesis, grain size, and size distribution by employing the microscopical method and the etching test. The results of the study are as follows: 1. The ore deposit is composed of the hydrothermal fissure linked veins, and filling cavities are mostly tensile fractures or joints, in rhyolitic rocks as a wall rock. 2. The principle ore minerals are native silver, acanthite, canfieldite, pyrargyrite, galena, tetrahedrite, sphalerite, pyrrhotite, chalcopyrite, chalcocite, covellite, zincite, and the gangue minerals are quartz and calcite. 3. The grain size of each ore minerals before grinding are; max. $2\frac{1}{2}$ mesh, medium 48-100 mesh(main size, contained over 80%), min. 3200mesh. And the grain size of each ore minerals after grinding is; max. 42mesh, medium 65-250mesh(main size, contained over 80%), min. 3200mesh. 4. The properties of the mineral texture effected on the ore dressing are follows; a) Inclusion texture; the fine grains of chalcopyrite is included in most acanthite, and rarely, that of galena included in acanthite. b) Exsolution texture; pyrargyrite is exsolved in acanthite. c) Replacement texture; native silver replaced pyrargyrite, and acanthite replaced galena. d) Interlocking paragenetic texture; the interlocking paragenetic minerals are pyrite, chalcopyrite, chalcocite, canfieldite. e) Fissure filling texture; chalcopyrite was filled along the cracks in acanthite. Among of the above texture, it is impossible to liberate the grains of a), and more difficult to liberate those of b) and c), while easy to liberate those of d) and e).

• Computers and Concrete
• /
• v.16 no.6
• /
• pp.933-961
• /
• 2015

Damage by high-speed impact fracture is a dominant mode of failure in several applications of concrete structures. Numerical modelling can play a crucial role in understanding and predicting complex fracture processes. The commonly used mesh-based Finite Element Method has difficulties in accurately modelling the high deformation and disintegration associated with fracture, as this often distorts the mesh. Even with careful re-meshing FEM often fails to handle extreme deformations and results in poor accuracy. Moreover, simulating the mechanism of fragmentation requires detachment of elements along their boundaries, and this needs a fine mesh to allow the natural propagation of damage/cracks. Smoothed Particle Hydrodynamics (SPH) is an alternative particle based (mesh-less) Lagrangian method that is particularly suitable for analysing fracture because of its capability to model large deformation and to track free surfaces generated due to fracturing. Here we demonstrate the capabilities of SPH for predicting brittle fracture by studying a slender concrete structure (column) under the impact of a high-speed projectile. To explore the effect of the projectile material behaviour on the fracture process, the projectile is assumed to be either perfectly-elastic or elastoplastic in two separate cases. The transient stress field and the resulting evolution of damage under impact are investigated. The nature of the collision and the constitutive behaviour are found to considerably affect the fracture process for the structure including the crack propagation rates, and the size and motion of the fragments. The progress of fracture is tracked by measuring the average damage level of the structure and the extent of energy dissipation, which depend strongly on the type of collision. The effect of fracture property (failure strain) of the concrete due to its various compositions is found to have a profound effect on the damage and fragmentation pattern of the structure.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.4
• /
• pp.297-303
• /
• 2010

We report the particle-size distribution and comminution charactersitics of dolomite depending upon crushing equipment (hammer crusher and roll crusher) and crushing circuit (open and closed). The quantity of fine particles (< 100 mesh) produced by hammer crusher was 34 wt.% which is about three times that by roll crusher. The quantity of 14~25 mesh size fraction by roll crusher was 20 wt.% higher than that produced by hammer crusher. 80 wt.% of the crushing products by hammer crushing was under 35 mesh in size, while the particles produced by roll crushing were relatively coarse. The particle size of both the hammer and roll crushers decreased by employing closed crusing circuit in comparison to open circuit. Products of required particle-size were obtained effectively depending on appropriate crushing equipment and crushing circuit.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.6
• /
• pp.511-520
• /
• 2009

In this paper, we present a new iso-density surface reconstruction scheme based on a hierarchy on the input volume data and the output mesh data. From the input volume data, we construct a hierarchy of volumes, called a volume pyramid, based on a 3D dilation filter. After constructing the volume pyramid, we extract a coarse base mesh from the coarsest resolution of the pyramid with the Cell-boundary representation scheme. We iteratively fit this mesh to the iso-points extracted from the volume data under O(3)-adjacency constraint. For the surface fitting, the shrinking process and the smoothing process are adopted as in the SWIS (Shrink-wrapped isosurface) algorithm[6], and we subdivide the mesh to be able to reconstruct fine detail of the isosurface. The advantage of our method is that it generates a mesh which can be utilized by several multiresolution algorithms such as compression and progressive transmission.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.2
• /
• pp.195-203
• /
• 2018

Among the techniques of reducing the drag to increase the speed of underwater moving bodies, we studied on the drag reduction method by gas injection. Researches on gas injection method have been paid much attention to reduce the drag of vessels or pipe inner walls. In this study, we used a sintered metal mesh that can uniformly distribute fine bubbles by gas injection method, and applied it to a cylindrical underwater moving body. Using the KRISO medium-sized cavitation tunnel, we measured both the bubble size on the surface of the sintered mesh and the bubble distribution in the boundary layer. Then, drag reduction tests were performed on the cylinder type underwater moving models with cylindrical or round type tail shape. Experiments were carried out based on the presence or absence of tail jet injection. In the experiments, we changed the gas injection amount using the sintered mesh gas injector, and changed flow rate accordingly. As a result of the test, we observed increased bubbles around the body and confirmed the drag reduction as air injection flow rate increased.

• Nuclear Engineering and Technology
• /
• v.13 no.2
• /
• pp.73-84
• /
• 1981

B$\Phi$rrensen proposed a coarse mesh, three-dimensional one-and-half group diffusion scheme for computing the gross power distribution in light water reactors as an alternative to the conventional fine mesh finite difference approach in dealing with three dimensional problems, which require a prohibitively long computing time. The method reported takes extremely small execution time. However, its computational accuracy has not been investigated yet. The B$\Phi$rrensen method is revised in this work and both efficiency and accuracy are examined by applying it to IAEA benchmark problem and RIS$\Phi$ benchmark problem. It is found that two modifications on core-reflector boundary conditions and B$\Phi$rrensen's model constants may improve computational accuracy of power distribution calculation.

• Nuclear Engineering and Technology
• /
• v.21 no.1
• /
• pp.56-61
• /
• 1989

A simple, approximate method for determining the two-group adjoint flux based on the Borresen's coarse-mesh 1.5 group diffusion theory scheme is proposed. With the principle of the 1.5 group diffusion theory scheme, the method describes the thermal leakage term of the adjoint flux approximately by the geomerical buckling determined from the fast adjoint flux. The accuracy of the adjoint flux is investigated tv the comparison of the adjoint flux constructed from this method with a fine-mesh finite-difference KIDD computations. It is shown that the proposed method can predict the adjoint flux as good as the KIDD results. Possible applications of the present method are then suggested in conjunction with the application of the perturbation theory.

• Journal of Biomedical Engineering Research
• /
• v.27 no.2
• /
• pp.64-72
• /
• 2006

The present study introduces a new cortical patch-based source model for EEG/MEG cortical source imaging to consider anatomical constraints more precisely. Conventional source models for EEG/MEG cortical source imaging have used coarse cortical surface mesh or sampled small number of vertices from fine surface mesh, and thus they failed to utilize full anatomical information which nowadays we can get with sub-millimeter modeling accuracy. Conventional ones placed a single dipolar source on each cortical patch and estimated its intensity by means of various inverse algorithms; whereas the suggested cortical patch-based model integrates whole cortical area to construct lead field matrix and estimates current density that is assumed to be constant in each cortical patch. We applied the proposed and conventional models to realistic EEG data and compared the results quantitatively. The quantitative comparisons showed that the proposed model can provide more precise spatial descriptions of neuronal source distribution.