• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.6
• /
• pp.1448-1454
• /
• 1994

Data which gathered and used in the field of fatigue and fracture mechanics have a lot of uncertainties. In this case, those uncertainties will make scatter band in evaluation of fatigue life and fracture toughness. Thus, the probabilistic analysis of these data will be needed. For determining the fatigue life in mixed mode, using crack direction law and fatigue crack growth law, the problem is studied as a constrained life minimization. Stress intensity factor(SIF) is computed by approximate solution table(Ewalds/Wanhill 1984) and 0th order PFEM. The variance of fatigue life and SIF are computed by differentiation of tabulated approximate solution and 1st order PFEM. And these are used for criterion of design values, principal parameter determination and modelling. The problem of center cracked plate is solved for checking the PFEM model which is influenced by various parameters like as initial crack length, final crack length, two fatigue parameters in Paris Equation and applied stress.

• Journal of Korean Society for Quality Management
• /
• v.8 no.2
• /
• pp.29-37
• /
• 1980

The purpose of this study is to define the role of a T. Q. C. engineer in the plant engineering activities. A "plant engineering" moves to complete a new project through a series of stages such as: 1. Research & Development stage. 2. Economic evaluation & engineering design stage. 3. Erection & start up stage. 4. Final production & control stage. This suggests that the plant engineering project should be carried out with a wide variety of tasks, as well as a central control. For a successful completion of the project, a T. Q. C. engineer is required, in practice, either as a central activity creator or as a key advisor in each task.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.11
• /
• pp.1267-1273
• /
• 2009

Hot press forming can produce high-strength components by rapidly cooling between closed punch and die after hot forming using quenchable boron steel austenized in a furnace. In the hot press forming process, the cooling rate is influenced by the size, position and arrangement of the cooling channel and the file condition of cooling water in the die. Also, mechanical properties of the final components and operation time are related to cooling rate. Therefore, the design of optimized cooling channel is one of the most important works. In this paper, the effect of position and size of the cooling channel on the cooling rate was investigated by using design of experiment and FE analysis in hot press bending process. Therefore the optimum cooling channel ratio was presented in the HPB.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.819-822
• /
• 2001

ISO TC 108/SC 2 산하에 이미 제정된 24 개의 관련 규격이 있으며, 그 중에 현재 4 개의 규격이 개정 심의 중에 있다. 본 논문에서는 FDIS(Final Draft International Standard) 개정 단계에 있는 육상용 증기 터빈 발전기 세트의 회전축 진동 및 비회전부 진동에 관련한 두 규격(ISO 7919-2:1996, ISO 10816-2:1996) 과 2000년 12월 15일자로 개정 완료된 선박 거주구역 및 작업구역의 진동에 관한 규격(ISO 6954:2000)을 개정 전 규격과 비교 설명 하고자 한다. (중략)

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.175-182
• /
• 2012

PURPOSES : This paper presents how to determine priorities of RWIS installation on national highways within the limited budget. METHODS : Analytical hierarchy process was employed to develop the entire methodology. In addition to this, various data such as vulnerable roadway section for snow removal, RWIS, AWS, AADT, and traffic accident were properly collected and analyzed for the future analysis. Then, GIS analysis was performed to find out the final candidate vulnerable roadway section for snow removal. In the end, expert survey was conducted to estimate weights for evaluation criteria. RESULTS : Results showed that metropolitan area has the most high priority, and Gangwon area, ChungCheung, and Honam in order. CONCLUSIONS : The main contribution of this paper is to suggest a logical methodology to prioritize RWIS installation within the limited budget, and thus snow removal operation during the winter season can improve in terms of getting more valuable information.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.559-564
• /
• 2000

Nuclear power plant structures amy be exposed to aggressive environmental effects that may cause their strength and stiffness to decrease over their service lives. Although the physics of these damage mechanisms are reasonably well understood and quantitative evaluation of their effects on time-dependent structural behavior is possible in some instances, such evaluations are generally very difficult and remain novel. The final goal of this study is to develop the reliability analysis of RC containment structures. The cause of the degrading is first clarified and the reliability assessment has been conducted. By introducing stochastic analysis based on random vibration theory, the reliability analysis which can determine the failure probabilities has been established.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.279-284
• /
• 2000

The bridge is nation's principal structure and its influence for national economy is enormous. But it is essential for maintenance of deteriorated bridge because of the increased service life and the decreased performance. For the bridge reinforced by continuos slabs and post-tensioning, we evaluate th stress properties of girders and internal support. Results are almost coincidence between measured data in the field and analysed data by computer. We compared the effects by successive order of post- tensioning and order considered distribution of each girder's camber and stress. Bridge's camber and stress showed respectively symmetry and asymmetry shape by post tensioning order. For the effect of post-tensioning force partition, we divided the post-tensioning force into 3 types (100%, 20%, 30%), and the results show t도 difference of final stress and camber.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11b
• /
• pp.319-321
• /
• 2003

This research was carried out to evaluate the removal efficiencies of CODcr and colour for the dyeing wastewater by ferrous solution in Fenton process. The results showed that COD was mainly removed by Fenton coagulation, where the ferric ions are formed in the initial step of Fenton reaction. On the other hand colour was removed by Fenton oxidation rather than Fenton coagulation. The removal mechanism of CODcr and colour was mainly coagulation by ferrous ion, ferric ion and Fenton oxidation. The removal efficiencies were dependent on the ferric ion amount at the beginning of the reaction. However the final removal efficiency of COD and colour was in the order of Fenton oxidation, ferric ion coagulation and ferrous ion coagulation. The reason of the highest removal efficiency by Fenton oxidation can be explained by the chain reactions with ferrous solution, ferric ion and hydrogen peroxide.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.89-96
• /
• 2001

A concrete lining of NATM tunnel is the final product of a process that involves planning and evaluation of user needs, geotechnical investigations, analysis of ground-lining interaction, construction, and observations and modifications during construction. The designer must consider the lining in context of the many function, construction, and geotechnical requirements. Also, the loss of supporting capacity of shotcrete lining due to poor rock qualities and shotcrete erosion must be considered. The values, shapes, and estimating methods of rock load and water pressure are very different with every designers. Estimating methods of rock loads used in the design of NATM tunnel concrete lining are investigated. Numerical analyses are done in various conditions. And the rock loads estimated from radial stress and plastic zone are compared respectively.

• Sleep Medicine and Psychophysiology
• /
• v.2 no.1
• /
• pp.44-54
• /
• 1995

It is very difficult to evaluate sleep disorders by simple history taking, because which covers very comprehensive areas such as psychobiosocial fields. Although polysomnography is used for the method of final diagnosis, systemic history taking and sleep question-aires are still critically important especially in evaluation of insomnia. Proper informations through sleep questionnaires can provide very precise data for effective treatment as well as exact diagnosis. Sleep questionnaires consist of largely four kinds of questionnaires, which are screening questionnaire of sleep disorders, sleep diary and questionnaire of sleep hygine, diagnostic questionnaire for specific sleep disorder and questionnaire of special symptoms of sleep disorders including insomnia, daytime sleepiness, cognitive function, mental symptom and personality, parasomnia, physical illness and sexual function. However, for more conclusive diagnosis especially in excessive daytime sleepiness nocturnal polysomnography and multiple sleep latency test should be performed.