• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.4
• /
• pp.51-61
• /
• 2013

In order to answer the research question of 'how the listed World Cultural Heritage is being managed now?' the indicators of management effectiveness evaluation were set up based on international principles on the basis of the preceding research. The weights and priorities of each evaluation indicators were worked out through the Analytic Network Process(ANP) Technique. Therefore, the evaluation system to evaluate the management status of the World Heritage Sites have been established. Also, through calculate the converted score of 100 points based on the relative importance of these evaluation indicators among the World Heritage Site management effectiveness evaluation index for scoring and the score table was created. When evaluated for the management status of World Heritage Sites to set five rating of the final evaluation score: very deficiency, deficiency, general, good, excellent. According to the results the follow-up study will be carried out in the future.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.2
• /
• pp.217-225
• /
• 2019

Objectives: The aim of this study is to evaluate the quality management systems of domestic asbestos survey and monitoring service providers and the relationships with the number of licenses or designations and sales performances. Methods: Data on quality management systems were collected by assessors who were assigned by the Korea Occupational Safety and Health Agency(KOSHA) during a pilot evaluation program for designated asbestos survey and monitoring service providers in 2016 using evaluation criteria developed by KOSHA. Basic characteristics, evaluated scores, and sales performance were gathered and statistically analyzed. Results: The median and arithmetic mean of the total scores were 0.64 and 0.66. Evaluation fields that scored highly with the highest percentages were sales performance, installation and availability of equipment, compliance with the mandatory minimum number of airborne samples, laboratory independence, and results of proficiency analytical testing, in that order. Evaluation fields that received low marks with the highest percentages were the training of personnel, blank field samples, calibration of flow rates, preliminary check and visual inspection of the work area prior to the clearance test, and review and approval of final reports, in that order. Comparison of normalized scores between service providers registered for asbestos and other tasks and those designated for only asbestos showed significant differences in their evaluated scores. Sales performance did not show a positive correlation with evaluated scores. Conclusions: The quality management systems of domestic asbestos survey and monitoring service providers were poor. High scores were recorded mostly in evaluation fields related to regulatory requirements. Low scores were recorded mostly in evaluation fields related to documentation and recordkeeping. Considering the low influence of quality on sales performance, the government needs to evaluate the quality management of asbestos survey and monitoring service providers and provide the results to public in order to address their low levels of quality management.

• Journal of Environmental Science International
• /
• v.29 no.12
• /
• pp.1185-1198
• /
• 2020

This study aimed to suggest a framework for biotope classification and evaluation based on habitat values to rationally establish management areas of national parks. The factors and indicators related to the biotope classification and evaluation were established based on integration from those of previous studies. The decision tree evaluation process was applied to the classification and evaluation of the biotope type level. The evaluation of the biotope group level was carried out to determine the weight and the AUEM (Adding Up Estimation Matrix) was applied for the final grades. As a result, the biotope type of Seolaksan National Park was classified into 43 types and Odaesan National Park was classified into 41 types. Bukhansan National Park, which is located in a metropolitan city, was classified into 49 types. In terms of biotope evaluation, grade III had a ratio of 50.6%, the highest in Seolaksan national park. The ratios of grade I and grade II, which have great ecological-value, were respectively 12.0% and 36.5%. Grade II was 48.2%, the highest ratio in Odaesan National Park. The ratios of grades I and II were 10.8% and 37.9%, respectively. Grade III was 54.8%, the highest ratio in Bukhansan national park, and the ratios of grade I and grade II, which have great ecological-value were, respectively, 11.4% and 25.7%. The biotope values of major national parks were evaluated according to the type focusing on the actual vegetation. This framework can be considered for application to the spatial management of other types of protected areas.

• Journal of Environmental Impact Assessment
• /
• v.31 no.5
• /
• pp.343-358
• /
• 2022

Due to the recent increase in the disabled population and welfare paradigm, the government is focusing on green welfare and environmental welfare to improve the living environment of the disabled, including the enactment of basic laws and convenience promotion laws. Accordingly, green environmental welfare for the disabled is supported in policy, but there are no evaluation indicators for the green welfare space and healing environment created. Therefore, this study divided the healing environment into physical, psychological, and social aspects, and conducted research using expert FGI to present evaluation indicators that can determine whether spatial roles and functions are appropriate. As a result of the study, the final 51 healing environment evaluation items were derived from 26 physical aspects evaluation items, 14 psychological aspects evaluation items, and 11 social aspects evaluation items. Evaluation indicators derived from this study can be used to evaluate the healing environment created in disabled residential facilities, and can be used as basic data in the planning stage of the healing environment to be created in the future.

• Journal of Food Hygiene and Safety
• /
• v.38 no.3
• /
• pp.79-88
• /
• 2023

Trifludimoxazin is a triazinone herbicide that inhibits the synthesis of protoporphyrinogen oxidase (PPO). The lack of PPO damages the cell membranes, leading to plant cell death. An official analytical method for the safety management of trifludimoxazin is necessary because it is a newly registered herbicide in Korea. Therefore, this study aimed to develop a residual analysis method to detect trifludimoxazin in five representative agricultural products. The EN method was established as the final extraction method by comparing the recovery test and matrix effect with those of the QuEChERS method. Various sorbent agents were used to establish the clean-up method, and no differences were observed among them. MgSO₄ and PSA were selected as the final clean-up conditions. We used LC-MS/MS considering the selectivity and sensitivity of the target pesticide and analyzed the samples in the MRM mode. The recovery test results using the established analysis method and inter-laboratory validation showed a valid range of 73.5-100.7%, with a relative standard deviation and coefficient of variation less than 12.6% and 14.5%, respectively. Therefore, the presence of trifludimoxazin can be analyzed using a modified QuEChERS method, which is widely available in Korea to ensure the safety of residual insecticides.

• Journal of Digital Contents Society
• /
• v.19 no.6
• /
• pp.1115-1121
• /
• 2018

In this paper, we have studied a data analysis method by deep learning to predict learning achievements based on accumulated data in cyber university learning management system. By predicting learner's academic achievement, it can be used as a tool to enhance learner's learning and improve the quality of education. In order to improve the accuracy of prediction of learning achievements, the autoencoder based attendance prediction method is developed to improve the prediction performance and deep learning algorithm with ongoing evaluation metrics and predicted attendance are used to predict the final score. In order to verify the prediction results of the proposed method, the final grade was predicted by using the evaluation factor attendance data of the learning process. The experimental result showed that we can predict the learning achievements in the middle of semester.

• Journal of Korean Foot and Ankle Society
• /
• v.9 no.2
• /
• pp.158-161
• /
• 2005

Purpose: To analyze the risk factors and the treatment results of the distal chevron osteotomy for the hallux valgus in young adult. Materials and Methods: Eleven cases of hallux valgus in 9 patients who underwent the distal chevron osteotomy between February 2000 and January 2004 were included for the study. For the clinical evaluation, we used hallux-metatarsophalangeal interphalangeal scale of American Orthopaedic Foot and Ankle Society (AOFAS). For radiological evaluation, we measured hallux valgus angle (HVA) and intermetatarsal angle (IMA). Results: Five patients had family history of hallux valgus. Symptoms were aggravated by military drill and sports activity. The average AOFAS scale was 62.5 preoperatively, and 88.4 at final follow-up. The HVA and IMA were $34.9^{\circ}$, and $15.8^{\circ}$ preoperatively, $16.3^{\circ}$ and $8.2^{\circ}$ at postoperative 6 weeks, and $19.9^{\circ}$ and $9.8^{\circ}$ at final follow-up. Conclusion: The symptoms of hallux valgus in young adults were aggravated by military drill and sports activity. Distal chevron osteotomy was useful for the treatment of the moderate to severe hallux valgus in young patients.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.2 s.48
• /
• pp.1-10
• /
• 2006

Reinforced concrete bridge columns with relatively small aspect ratio show flexure-shear behavior, which is flexural behavior at initial and medium displacement stages and shear failure at final stage. Since the columns with flexure-shear failure have lower ductility than those with flexural failure, shear capacity curve models shall be applied as well as flexural capacity curve in order to determine ultimate displacement for seismic design or performance evaluation. In this paper, a modified shear capacity curve model is proposed and compared with the other models such as the CALTRANS model, Aschheim et al.'s model, and Priestley et al.'s model. Four shear capacity curve models are applied to the 4 full scale circular bridge column test results and the accuracy of each model is discussed. It may not be fully adequate to drive a final decision from the application to the limited number of test results, however the proposed model provides the better prediction of failure mode and ultimate displacement than the other models for the selected column test results.

• The Korean Journal of Community Living Science
• /
• v.23 no.4
• /
• pp.537-552
• /
• 2012

This study was conducted to investigate the quality characteristics of cooked rice with cereals frequently consumed in Korea by blending ratio. Seven kinds of cereals, white rice, glutinous barley, brown rice, black rice, glutinous rice, glutinous foxtail millet and proso millet, were chosen for the study. According to the results from rapid viscosity analyzer, glutinous barley had the lowest pasting temperature($66.55^{\circ}C$) and black rice had the highest values in the peak(231.77 RVU), trough(162.25 RVU), final viscosity(295.81 RVU) and set back(64.05 RVU)(p<0.05). Water absorption rate by soaking time for black rice and brown rice was increased only 18.77% and 14.57%, respectively, even after 120 minutes, whereas those of other cereals were increased up to 20.28~39.32% after 50 minutes. The pasting characteristics of white rice blended with cereals tended to be lower than white rice in the peak, trough, and final viscosity. Textural property of cooked white rice blended with black rice, brown rice, and glutinous foxtail millet showed a significantly higher value for hardness than that of cooked white rice only(p<0.05). The most preferred blending ratio of the respective cereals was 25% for glutinous barley, 10% for black rice, brown rice and proso millet, and 5% for glutinous foxtail millet and glutinous rice in the sensory evaluation for overall quality, but there were no significant differences except glutinous barley, brown rice and glutinous foxtail millet.

• Korean journal of food and cookery science
• /
• v.23 no.3 s.99
• /
• pp.369-377
• /
• 2007

The aims of this study were to develop and standardize the manufacturing procedures and ingredient formulation of non-fried, extrusion-puffed Yukwa. The quality and storage stability of the non-fried Yukwa (NF) were characterized and compared against a traditional deep-fried Yukwa (F). The moisture contents of both the NF and F were almost comparable at 5.12${\sim}$6.22% after the final product preparation. The textural hardness values of the NF samples were one-half to two times as hard as those of F, although no clear distinctions were reported between the two products by the sensory evaluation results (p<0.05). During storage, the acid value of F was 1.68 KOH mg/g on day 7, and then it rapidly increased to 5.52 KOH mg/g on day 14. In contrast, the acidity values of NF were 1.21 and 2.62 KOH mg/g on day 7 and 14, respectively. The peroxide values of the samples increased from 23.5 to 62.0 meq/kg (F) and from 2.0 to 2.5 meq/kg (NF) during the two weeks of storage after preparation, suggesting excellent fat stability for the NF product. Regarding the sensory evaluation results of the products, no significant (p<0.05) differences were noted between F and NF with scores of approximately 3.1 out of 5.0 points for the overall quality characteristics of the final products. Accordingly, we conclude that extrusion puffing technology could be adopted as an alternative to conventional deep fat frying as a partial manufacturing process of Yukwa.