• Korean Journal of Organic Agriculture
• /
• v.18 no.1
• /
• pp.75-82
• /
• 2010

The purpose of this study is to investigate an occurrence rate of rice stripe virus disease under different rice transplanting time and different rice cultivars. After final harvest, the yield of rice infected by rice stripe virus was obtained on Wangchal cultivar compared to uninfected rice. The results obtained as following: 1) Yield of rice infected by rice stripe virus was decreased by 64% with reduction of culm length, pancile length, number of spike, number of spikelet, and grain filling compared to uninfected rice, 2) An occurrence rate of rice stripe virus disease under different rice planting season was high as order of May 30 > June 15 > July 1. In additional, to reduce a rice stripe virus disease on higher disease occurrence region and susceptible cultivars, rice planting season will be accepted on and after June 15, and 3) Eighteen cultivars were resistance cultivars such as Hwayeongbyeo, Onnuri, Ilmibyeo, Nampyongbyeo, Dongjin2ho, Hopumbyeo, Hwangkeumnuri, Malgeumi, Saenuri, Pungmi1ho, Haechanmulgyeo, Hwangkeumnodeul, Chilbobyeo, Dongjinbyeo, Younganbyeo, Junambyeo, Samkwangbyeo, and Nakdongbyeo. Twenty-one cultivars were susceptible cultivars such as Odaebyeo, Unkwangbyeo, Shinungbong1ho, Manabyeo, Hopyongbyeo, Borami, Damibyeo, Hwangchalbyeo, Sulgengbyeo, Nongrim6ho, Sasanishigi, Yunishigari, Chungmubyeo, Dongjin1ho, Huknambyeo, Guromy, Shanghehanghulna, Heukchalbyeo, Heukhwangbyeo, and Aranghwangchalbyeo.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.4
• /
• pp.5-13
• /
• 2022

The current environmental problem is that environmental pollution is accelerating due to the generation of large amounts of waste and indiscriminate consumption of energy. Fossil fuels, a representative energy production fuel, are burned in the process of producing energy, generating a large amount of greenhouse gases and eventually causing climate change. In addition, the amount of waste generated worldwide is continuously increasing, and environmental pollution is occurring in the process of waste treatment. One of the methods for simultaneously solving these problems is the energy recovery from and reduction of organic wastes. Sewage sludge generated in sewage treatment plants has been treated in various ways since ocean disposal was completely prohibited, but the amount generated has been continuously increasing. Since the sewage sludge contains a large amount of organic materials, it is desirable to recover energy from the sewage sludge and reduce the final discharged waste through anaerobic digestion. However, most of the excess sludge is a mass of microorganisms used in sewage treatment, and in order for the excess sludge to be anaerobically digested, the cell walls of the microorganisms must be destroyed first, but it takes a lot of time to destroy the cell walls, so high rates of biogas production and waste reduction cannot be achieved only by anaerobic digestion. Therefore, the pre-treatment process of solubilizing excess sludge is required, and the thermal solubilization process is verified to be the most efficient among various solubilization methods, and high rates of biogas production and waste reduction can be achieved by anaerobic digestion after destroying cell walls the thermal solubilization process. In this study, when pretreating TS 10% thickened excess sludge through a thermal solubilization system, a study was conducted on solubilization characteristics according to retention time and operating temperature variables. The experimental variables for the retention time of the thermal solubilization system were 30 minutes, 60 minutes, 90 minutes, and 120 minutes, respectively, while the operating temperature was fixed at 160℃. The soulbilization rates calculated through TCOD and SCOD derived from the experimental results increased in the order of 12.11%, 20.52%, 28.62%, and 31.40%, respectively. And the variables according to operating temperature were 120℃, 140℃, 160℃, 180℃, and 200℃, respectively, while the operating retention time was fixed at 60 minutes. And the solubilization rates increased in the order of 7.14%, 14.52%, 20.52%, 40.72%, and 57.85%, respectively. In addition, TS, VS, T-N, T-P, NH₄⁺-N, and VFAs were analyzed to evaluate thermal solubilization characteristics of thickened excess sludge. As a result, in order to obtain 30% or more solubilization rate through thermal solubilization of TS 10% thickened excess sludge, 120 minutes of retention time is required when the operating temperature is fixed to 160℃, and 170℃ or more of operating temperature is needed when the operating time is fixed to 60 minutes.

• Journal of the Korean Society of School Health
• /
• v.11 no.2
• /
• pp.171-187
• /
• 1998

In recent years, adolescent issues including smoking, drinking, drug abuse, juvenile delinquency, deviant sexual behavior, mental health problems, high suicide rate, juvenile delinquency and absence without due notice, etc are emerging as serious social problems and the debate on these controversial issues is heating up. The previous studies on adolescent health behavior and social juvenile delinquency such as run-away from home and absence without due notice have been conducted mostly by cause analysis utilizing social demographic factors or biological factors. In other words, the main factors analyzed were demographic and economic factors or parent's educational level, etc, which were the fixed environmental ones that were unable to cause the change in the health behavior. Accordingly, the purpose of this study is to analyze factors which are changeable and fixable among the factors influencing the adolescent's health behavior and misconducts and, eventually influencing factors which can be used as the basis to establish health policies and health promotion program to reduce the health risk behavior and misconducts of adolescents. The study subjects were selected by dividing senior high school student in Seoul by region and through random sampling. The 890 subjects were selected from 10 schools including the preparatory school, vocational schools and institutional schools. The duration of the study was for July 1-5, 1997 for the first survey and the second one, for August 25-September 10. Regarding the analysis method, the SAS program was used. The adoptablity of theoretical model was tested through covariance structural analysis utilizing PC-LISREL 8.12 Program. The major findings of the study are as follows: As a result of establishing the model of factors influencing health behavior and juvenile delinquency, in case of male students as the health behavior self-efficacy, education level of fathers, economic level, self-control and the health interest of parent were higher, students were more likely to practice the health promoting behavior. Juvenile delinquency and health risk behavior were prevalent among those with the less shyness, the lower health behavior self-efficacy, lower self-control, lower self-assertiveness, lower economic level. The self-control was the most powerful factor. In case of female students, those with higher health behavior self-efficacy were more likely to practice the health promoting behavior whereas those with lower health behavior self-efficacy, lower self-control, lower self- assertiveness, less shyness were more likely to practice health risk behavior and juvenile delinquency. In case of prep schools, those with higher health behavior self-efficacy and better perceived health status were more likely to practice the health promoting behavior while those with less shyness, lower health behavior self-efficacy and lower academic achievement were more likely to engage in health risk behavior and juvenile delinquency. In case of vocational schools, as health behavior self-efficacy and economic level were higher, the practice rate of health promoting behavior was higher. As the self-control, shyness, self-assertiveness, health behavior self-efficacy were lower, the rate of health risk behavior and juvenile delinquency were higher. In case of social institutional schools, as, the health behavior self-efficacy, social support and economic level, health interest of parents were higher, the rate of health promoting behavior were higher. As the self-control, shyness, self-assertiveness, health behavior self-efficacy and social support were lower, the rate of health risk behavior and juvenile delinquency were higher. So the health promoting behavior was positively related to the health behavior self-efficacy, health interest of parents, social support, education level of fathers, level of perceived health status, economic level. The health risk behavior and juvenile delinquency were higher with the lower health behavior self-efficacy, self-control and self-assertiveness, lower health locus control, less shyness and loneliness, lower economic level and academic achievement. In conclusion, the health risk behavior and juvenile delinquency can be reduced by enhancing self-control, self-assertiveness, health behavior self-efficacy and social support. According to the final model drawn by connecting health behavior and juvenile delinquency, the reduction of health risk behavior can greatly contribute to decreasing social juvenile delinquency as the process of juvenile delinquency was extended from common behaviors to problem behaviors and further into juvenile delinquency.

• Journal of the Korean Arthroscopy Society
• /
• v.6 no.2
• /
• pp.142-149
• /
• 2002

Purpose : The purpose of this study is to compare with result of repair and resection in displaced bucket handle medial meniscal tear. Materials and Methods : From Sep. 1998 to Dec. 2001, we experienced 46 cases, 45 patients. We classified them into repair group (group I, 23 cases) and resection group (group II, 23 cases). We analyzed the time interval between injury and operation, zone of tear, the status of reduction and quality of displaced fragment of all cases. Average follow-up period is 29, 28 months, respectively. We evaluated the final results of both groups as Lysholm knee score, radiologic changes and 2nd look arthroscopy. Results : Mean age was 25 years old in both group, respectively. Mean interval between injury and surgical treatment was 12 and 17 weeks. respectively. In group I, 6 of 7 cases were evaluated as clinical success in red-red zone, 12 of 15 cases were assessed as clinical success in red-white zonal tear, stable reduction. Another case which is evaluated as clinical failure showed red-white zonal tear, unstable reduction and poor quality meniscal fragment. 5 cases showed variant degrees of tibio-femoral compartment symptom. In group II, red-white zone (9 cases) and white-white zone (14 cases) were treated as resection and got good results. Conclusion : Considering zone of tear, reducibility and quality of meniscal fragment before treatment will improve the success rate of meniscal repair.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.3
• /
• pp.287-294
• /
• 1996

The objective of this study was to investigate the optimum level of the rumen protected lysine (RPLys) for early lactating Holstein dairy cow. This experiment was carried out with 16 Holstein dairy cows for 106 days and consisted of 4 treatments : $T_1$ (RPLys 0%), $T_2$ (RPLys 0.1%), $T_3$ (RPLys 0.2%) and $T_4$ (RPLys 0.3%). The results obtained are summarized as follows : 1. The daily intakes of feed were similar among treatments, but the digestibility of crude protein tended to increase 0.5-5.0% with increased level of RPLys and also the crude fiber digestibility increased (p < 0.05). 2. The daily weight gain for cows in $T_1$ was 253 g, which was lower than any other treatments (p < 0.05). The highest was 521 g in $T_3$. Also, the body condition score was changed from 3.22 at initial to 3.45 at final. The lowest increase in body condition score as 0.09 was obtained in control and the highest as 0.60 in $T_3$ (p < 0.01). 3. The total milk production of groups $T_2$, $T_3$ and $T_4$ were higher than $T_1$, as well as total protein, total fat and total solid yield. Especially in $T_4$ treatment group milk yield was higher than other treatments. The content of fat was higher in $T_2$ and $T_4$ compared to other treatments. Other components of milk were not significantly different (p > 0.05). The persistencies of lactation were increased in all RPLys treatments, especially, rate of reduction in milk yield was lowest in $T_4$ (p < 0.05). 4. The total amino acid content in the plasma, as well as plasma lysine content showed no consistent trend with treatments.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.11
• /
• pp.1547-1551
• /
• 2011

Bakery waste (BW) is much cheaper than barley (20 to 40% the price of barley). Bakery waste and barley grain have similar chemical composition; they contain 99 and 97% organic matter (OM), 1.1 and 1.8% fat, 18 and 15% neutral detergent fibre (NDF) and 14.0 and 14.5% crude protein (CP), respectively (DM basis). The objectives of this study were to determine the effect of substituting BW for barley grain in high concentrate fattening diets for lambs on nutrient intake, growth and carcass characteristics. Forty Awassi lambs (21.75${\pm}$1 kg) weaned at the age of 65 days were assigned randomly to four experimental fattening diets differing in BW ratio in a completely randomized design. The control diet (CON) contained 20, 60, 11, 7, and 2% (DM basis) wheat straw, barley grain, soybean meal, corn grain, and minerals and vitamin mix, respectively. Bakery waste substituted barley grain by 10, 20 and 30% of the diet DM in the LBW, MBW and HBW diets, respectively. The experiment lasted for 56 days. Dry matter intake (DMI) decreased (p<0.05) in LBW diet compared to the CON diet by approximately 10%. No further reduction in DMI was observed with the higher substitution levels. Metabolizable energy intake for the CON diet (3.6 Mcal/d) was also reduced (p<0.05) compared with LBW, MBW and HBW diets (3.4, 3.4 and 3.3 Mcal/d, respectively). Final body weight for lambs fed the CON diet (34.8 kg) was higher (p<0.05) compared with lambs fed the LBW, MBW and HBW diets (30.6, 32.0 and 31.1 kg, respectively). Growth rate for lambs fed the CON diet (232 g/d) was also higher (p<0.05) compared to lambs fed the LBW, MBW and HBW diets (170, 189, and 167 g/d, respectively). Feed to gain ratio was higher (p<0.05) for lambs fed the LBW, MBW and HBW diets (7.2, 6.6 and 7.3, respectively) compared with lambs that consumed the CON diet (5.7). Body weight gain cost was reduced by approximately 8% by the MBW and HBW diets as compared with the CON diet. Dressing percentage, full gut weight, empty gut weight and liver weights were all unaffected by the BW addition to the diets and averaged 48.9%, 6.8 kg, 2.8 kg and 0.444 kg, respectively. However, fat tail weight was increased (p<0.05) with the higher levels of the BW inclusion. In conclusion, substituting BW for barley grain reduced DMI and growth performance. However, when BW substituted barley grain at the 20 and 30% of the diet DM, body weight gain cost was reduced by approximately 8%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.320-326
• /
• 2017

Multistage deep-drawing technology is used widely in the production of mobile phone battery cases to improve productivity and economy. To ensure adequate capacity and rigidity, such cases are fabricated as a rectangular cup with a high slender ratio. The multistage deep-drawing of a rectangular cup entails a high slender ratio, and the heights of the product sides may be non-uniform because of the complicated deformation mechanisms. This causes problems in product assembly that affects the surface quality of the case. This study examined a blank shape that minimizes the height variations of the product to resolve the aforementioned problems. Optimization design and analysis were performed to identify the shape that yields the least variation. The long and short sides of an oval blank were set as the design variables. The objective function was set to yield the lowest height difference, and the thickness reduction rate of the product was set to the target range. In addition, the height of the final shape was set as a constraint. The height difference was minimized successfully using the optimized design. The design process of the initial blank for all rectangular shapes can be automated in the future.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.3
• /
• pp.153-158
• /
• 2002

The effects of leveler on the copper trench filling were investigated during damascene plating process. To investigate the trench filling effect with the addition of a leveler, a cross-section images of the electroplated trenches with the width of$0.37{\mu}m,\;and\;0.18{\mu}m$ were observed by field emission scanning electron microscope (FE-SEM). Polyethylene glycol(PEG), 3-mercapto-1-propanesulfonic acid and Janus Green B were used as a carrier, an accelerator and a leveler. $0.37{\mu}m$ trenches were superfilled without voids, but there was voids formation in $0.18{\mu}m$ trenches when the leveler was not added into the electrolyte. On the other hand $0.18{\mu}m$ trenches were superfilled without voids with the addition of the leveler due to the reduction growth rate of copper at protrusions and edges, which yield smooth final deposit surface. The leverer effect becomes more significant as the width of trenches becomes smaller when trenches are filed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.11
• /
• pp.1599-1607
• /
• 2004

This study examined the effects of pre-slaughter fasting, chasing stress and chiller ageing on objective meat quality, and their relations to the proteome profile of longissimus muscle using 20 male Korean native black pigs. Treatments were composed of two levels of pre-slaughter feed withdrawal, two levels of pre-slaughter stress and four chiller ageing times. A 15 min chasing stress immediately prior to slaughter significantly (p<0.05) decreased detectable levels of $\mu$-calpain activity during rigor development and chiller ageing, but did not have any direct effect on objective meat quality. On the other hand, pigs fed until the morning of slaughter resulted in significantly (p<0.05) higher hunter L* value and cooking loss than those which received an 18 h feed withdrawal prior to slaughter. Cooking loss and hunter L* value were constant during 7 d of chiller ageing, followed by significant increases at 14 d. The fed animals showed a significantly (p<0.05) higher hunter a* value at both 3 and 7 d, while the other group maintained a stable redness for 7 d. WB-shear force was not affected by the pre-slaughter treatments, but had significant (p<0.05) linear reduction from 1 to 7 d. A gelbased proteome analysis was performed on selected animals for low and high hunter L* values at 1 d. Ten and five spots had greater than two-fold spot densities for the low and high hunter L* groups, respectively. The ten spots included chain A, deoxyribounclease I complex with actin, heat shock protein 27 kDa, a protein similar to cardiac $Ca^{2+}$ release channel, and myosin heavy chain, while the five spots included chain A aldehyde dehydrogenase, glycerol-3 phosphate dehydrogenase, and hemoglobin alpha chain. In general, feeding until the morning of slaughter resulted in more desirable meat color, but appeared to reduce palatability due to increased cooking loss. Proteome analysis demonstrated that various proteins were concomitantly involved in the determination of final meat color. The most noticeable observation in the current study was that various isoforms for a particular protein differed in degradation and/or expression rate depending on meat quality.

• Korean Journal of Food Science and Technology
• /
• v.18 no.4
• /
• pp.306-312
• /
• 1986

Color changes of a mixture of 0.8 M glucose, fructose or sucrose and 0.8 M glycine were evaluated by Hunter 'L', 'a', 'b' values during Maillard reaction at the temperature range of $70^{\circ}-100^{\circ}C$. The results suggested the reaction to be devided into three stages. In initial reaction the 'L' and 'a' values decreased slowely, and 'b' rapidly increased to maximum, which were followed by a rapid decrease in 'L' and 'b' and rapid increase in 'a' values at intermediate stage. At final reaction period the both 'L' and 'b' were slowed down in their reduction rate while 'a' decreased rapidly from its maximum point. All of the Hunter values were reached to nea. zero. Linear equations, which can be used for prediction of cole. change in Maillared reaction, of $1/\sqrt{(L_t-L_{\circ})^2\;+\;(a_t-a_{\circ})^2\;+\;(b_t-b_{\circ})^2}\;=\;a(1/t)\;+\;b$ for Hunter values and $1/\sqrt{X\;+\;Y\;+Z}\;=\;a(1/t)\;+\;b$ for CIE tristimulus values were found to have a very high correlation coefficient. Relationships between 'L' and 'a', 'L' and 'b' and 'a' and 'b' were also graphcally compared.