• Proceedings of the KIEE Conference
• /
• 2001.07e
• /
• pp.80-85
• /
• 2001

Frequency is an important operating parameter of a power system. Frequency of a power system remains constant if sum of all the loads plus losses equals total generation in the system. However, the frequency starts to decrease if total generation is less than the sum of loads and tosses. On the other hand, the system frequency increases if total generation exceeds the sum of loads and losses. Electric power systems sustain transient frequency swings whenever the balance between generation and load does not no longer hold. To cope with this Constraints, it requires an accurate and high speedy frequency deviation estimation technique and suitable adjustment to obtain the power system energy balance. The fundamental frequency component of 3-phase signal is first extracted by using an algorithm based on FIR(finite duration impulse response) filter, a phase angle of a voltage. The rate change of the phase angle is used for estimation and speed in its process. Also, to confirm the validity of the proposed algorithm, the simulation results obtained by using EMTP(electro magnetic transients program) are shown.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1889-1900
• /
• 2018

Harmonic current mitigation is vital in power distribution networks owing to the inflow of nonlinear loads, distributed generation, and renewable energy sources. The active power filter (APF) is the current electrical equipment that can dynamically compensate for harmonic distortion and eliminate asymmetrical loads. The compensation performance of an APF largely depends on the control strategy applied to the voltage source inverter (VSI). Model predictive control (MPC) has been demonstrated to be one of the effective control approaches to providing fast dynamic responses. This approach covers different types of power converters due to its several advantages, such as flexible control scheme and simple inclusion of nonlinearities and constraints within the controller design. In this study, a finite control set-MPC technique is proposed for the control of VSIs. Unlike conventional control methods, the proposed technique uses a discrete time model of the shunt APF to predict the future behavior of harmonic currents and determine the cost function so as to optimize current errors through the selection of appropriate switching states. The viability of this strategy in terms of harmonic mitigation is verified in MATLAB/Simulink. Experimental results show that MPC performs well in terms of reduced total harmonic distortion and is effective in APFs.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.3
• /
• pp.319-327
• /
• 2011

An iterative technique based on orthogonal filters and frequency tracking is proposed to estimate harmonic components in power systems. The technique uses frequency interpolation to estimate fundamental frequency and harmonics when the nominal frequency of the signal is a non-integer value. Due to the number of computations involved during the generation of filter coefficients, an offline computation is suggested. Beneficial features of the proposed technique include fixed sampling rate and fixed data window size. The performance of the proposed technique is examined by simulating different power system operating conditions and evaluating the data from these simulations. A technique based on Fast Fourier Transform is also used to estimate the harmonic components for all the simulated signals. These estimates are compared with those obtained from the proposed technique. Results show that the proposed technique can converge to the accurate fundamental frequency and therefore, provide accurate harmonic components even when the fundamental frequency is not equal to the nominal frequency.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.2
• /
• pp.939-951
• /
• 2019

A novel empirical mode decomposition strategy based on Fourier transform and band-pass filter techniques, contributing to efficient instantaneous vibration analyses, is developed in this study. Two key improvements are proposed. The first is associated with the adoption of a band-pass filter technique for intrinsic mode function sifting. The primary characteristic of decomposed components is that their bandwidths do not overlap in the frequency domain. The second improvement concerns an attempt to design narrowband constraints as the essential requirements for intrinsic mode function to make it physically meaningful. Because all decomposed components are generated with respect to their intrinsic narrow bandwidth and strict sifting from high to low frequencies successively, they are orthogonal to each other and are thus suitable for an instantaneous frequency analysis. The direct Hilbert spectrum is employed to illustrate the instantaneous time-frequency-energy distribution. Commendable agreement between the illustrations of the proposed direct Hilbert spectrum and the traditional Fourier spectrum was observed. This method provides robust identifications of vibration modes embedded in vibration processes, deemed to be an efficient means to obtain valuable instantaneous information.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.260-263
• /
• 2000

A technique that uses linear prediction to achieve noise reduction in a voice signal which has been mixed with an ambient noise (Signal to Noise (S-N) ratio = about 0dB) is proposed. This noise reduction method which is based on the linear prediction estimates the voice spectrum while ignoring the spectrum of the noise. The performance of the noise reduction method is first examined using the transversal linear predictor filter. However, with this method there is deterioration in the tone quality of the predicted voice due to the low level of the S-N ratio. An additional processing circuit is then proposed so as to adjust the noise reduction circuit with an aim of improving the problem of tone deterioration. Next, we consider a practical application where the effects of round on errors arising from fixed-point computation has to be minimized. This minimization is achieved by using the lattice predictor filter which in comparison to the transversal type, is Down to be less sensitive to the round-off error associated with finite word length operations. Finally, we consider a practical application where noise reduction is necessary. In this noise reduction method, both the voice spectrum and the actual noise spectrum are estimated. Noise reduction is achieved by using the linear predictor filter which includes the control of the predictor filter coefficient’s update.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.6
• /
• pp.2115-2130
• /
• 2022

With the development of over-the-top (OTT) services, the demand for content is increasing, and you can easily and conveniently acquire various content in the online environment. As a result, copyrighted content can be easily copied and distributed, resulting in serious copyright infringement. Some special forms of online service providers (OSP) use filtering-based technologies to protect copyrights, but illegal uploaders use methods that bypass traditional filters. Uploading with a title that bypasses the filter cannot use a similar search method to detect illegal content. In this paper, we propose a technique for profiling the Heavy Uploader by normalizing the bypassed content title and efficiently detecting illegal content. First, the word is extracted from the normalized title and converted into a bit-array to detect illegal works. This Bloom Filter method has a characteristic that there are false positives but no false negatives. The false positive rate has a trade-off relationship with processing performance. As the false positive rate increases, the processing performance increases, and when the false positive rate decreases, the processing performance increases. We increased the detection rate by directly comparing the word to the result of increasing the false positive rate of the Bloom Filter. The processing time was also as fast as when the false positive rate was increased. Afterwards, we create a function that includes information about overall piracy and identify clustering-based heavy uploaders. Analyze the behavior of heavy uploaders to find the first uploader and detect the source site.

• Journal of Korea Multimedia Society
• /
• v.15 no.8
• /
• pp.977-985
• /
• 2012

The purpose of this study was to present a non-photorealistic rendering technique that is efficient in single images and moving images. In case of single images, they could be processed in a real-time base by realizing flow-based DoG filter and bilateral filter, which have been frequently used in the single image NPR technique recently, in the CUDA environment. In case of moving images, the investigator presented not the existing method of NPR moving images which generating images by applying the single image NPR technique to every frame, but the method of using the single image NPR technique in the first frame and stylizing it, and then of using the motion vector-based pixel mapping in the second frame on and copying the bright values of pixels that move on the frame into the location of next frame's motion vector, thus reducing unnecessary volume of calculation and maintaining the consistency between frames. In this study, the performance of this method was proved via an experiment.

• The KIPS Transactions:PartB
• /
• v.12B no.4 s.100
• /
• pp.379-386
• /
• 2005

This paper provides a rigorous theory for analysis of quantization effects and optimum filter bank design in quantized multidimensional subband filter banks. Even though subband filter design has been a hot topic for last decades, a few results have been reported on the subband filter with a quantizer. Each pdf-optimized quantizer is modeled by a nonlinear gain-plus-additive uncorrelated noise and embedded into the subband structure. Using polyphase decomposition of the analysis/synthesis filter banks, we derive the exact expression for the output mean square quantization error. Based on the minimization of the output mean square error, the technique for optimal filter design methodology is developed. Numerical design examples for optimum nonseparable paraunitary and biorthogonal filter banks are presented with a quincunx subsampling lattice. Through the simulation, $10\~20\;\%$ decreases in MSE have been observed compared with subband filter with no quantizers especially for low bit rate cases.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2562-2564
• /
• 2002

This paper presents an auxiliary beam-assisted adaptive compensation technique applied to alleviate the problem of LDV's body vibration. The LMS algorithm is applied to adaptively compensate the body vibration utilizing the reference signal provided by the auxiliary beam. The usefulness of the proposed technique is verified via computer simulations performed for diverse types of target signals and body vibration.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.105-106
• /
• 2007

We present a fast reconstruction technique for elliptic objects, which can be applied to real-time computer tomography (CT) for simple geometric objects. It will be also shown that only 3 projections are needed to reconstruct an ellipse. A piecewise quadratic model is also proposed for more efficient Kalman filter based support estimation, which is used for the fast reconstruction technique. The performance of the piecewise quadratic model is compared with that of the existing piecewise linear model. Simulation results for the fast reconstruction are also presented.