• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.130-133
• /
• 1999

In the view point of further reducing the inter-symbol interferences studied in our previous paper 〔1〕, a quadrature pair of wavelet-based filter banks that are composed of a pair of cosine and sine modulated filter banks is applied to MC-CDMA transmultiplexing. For that fact, the symbol duration gets twice longer than the one in , 〔1〕, the interference effects due to channel overlapping and Doppler spread can be effectively alleviated while increasing the channel utilization efficiency. Moreover, the well-known wavelet properties are exploited to design the prototype filter in such a way to maintain the size of sidelobes much smaller than those of the FFT, the interference reduction effect can be further obtained. To verify the behavior of our proposed quadrature filter bank based MC-CDMA system, the reverse-link bit error rates with respect to SNR under Rayleigh fading and additive white Gaussian noise channel environments are computed. The results show an improved system performance over the conventional MC-CDMA.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.912-915
• /
• 2002

In this report, we propose a non-separable two-dimensional (2D) Lossless Wavelet Transform (LWT) for image compression. Filter characteristics of our proposed LWT are the same as those or conventional 2D LWT based on applying 1D LWT twice but our coding performance is better due to reduction of rounding effects. Simulation results confirm effectiveness of our proposed LWT.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.667-670
• /
• 2000

This paper provides a heuristic theory for modeling and analysis of vector quantization effects in 2-dimensional subband filter banks. This model is used as the basis for optimal filter bank design. The scalar non-linear gain-plus-additive noise quantization model can be used to represent each vector quantizer in 2-band subband codec. The validity and accuracy and of this analytic model is confirmed by comparing the calculated model quantization errors with actual simulation of the optimum LBG vector quantizer. Numerical design examples for the optimum separable paraunitary filter banks are suggested in this paper.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.850-853
• /
• 1987

A VLSI digital filter design using a semi-custom method is described. The digital filters composed of TDM/FDM Transmultiplexer are designed. Using the polyphase network approach a filter bank composed of only all-pass digital filter sections was designed. The use of all-pass filters as basic building blocks is shown to provide a transmultiplexer structure that has low computational requirements, low quantization noise, and high modularity. The silicon compiler systems is used to reduce the design time and increase the credibility of designed filters. A design of 1st order and 2nd order all pass filters is done using CMOS 2um N-well double metal cell.

• Journal of Power Electronics
• /
• v.12 no.3
• /
• pp.458-467
• /
• 2012

Single phase converters suffer from ripple power pulsating at twice the line frequency. The ripple power is usually absorbed by a bulky capacitor bank and/or a dedicative LC resonant link, resulting in a low power density and a high cost. An alternative solution is using a dc link active power filter (APF) to direct the pulsating power into another energy-storage component. The main dc link filter capacitor can then be reduced substantially. Based on a mainstream dc APF topology, this paper proposed a new control strategy incorporating both dual-loop control and repetitive control. The circuit parameter design is also re-examined from a control point of view. The proposed APF scheme has better control performance, and is more suited for high power applications since it works in CCM and with a low switching frequency.

• Journal of electromagnetic engineering and science
• /
• v.17 no.1
• /
• pp.34-38
• /
• 2017

In this paper, we propose an active tunable bandpass filter (BPF) for efficient spectrum sensing in the TV White Space (TVWS) band. By designing a narrow bandwidth, it is possible to improve the sensing probability. The basic circuit configuration involves switching the PIN diode compromising capacitor bank to change the capacitance of the LC resonant circuit. To cover the whole TVWS band effectively, we add a varactor diode, and the bandwidth is set to 25-MHz. We improve the insertion loss by using the active capacitance circuit. The tunable BPF in the TVWS band with a 20-MHz interval is designed to have 11 channels with a bandwidth of 25 MHz and a low insertion loss of 1.7-2.0 dB.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1174-1176
• /
• 2000

This paper presents a new control strategy of the active power filter to compensate the fundamental and high order reactive power. Using the proposed control strategy, the calculation of active and reactive power of the load is not required. So the system configurations and the controller can be constructed very simply. To decrease the load of active power filter, the LC passive filter bank can be used without any additional strategy. In this paper, the algorithm of the proposed new control strategy is discussed and the experimental results are shown.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2407-2414
• /
• 1999

This paper introduces the concept of warped discrete cosine transform (WDCT) and an image compression algorithm based on the WDCT. The proposed WDCT is a cascade connection of a conventional DCT and all-pass filters whose parameters can be adjusted to provide frequency warping. In the proposed image compression scheme, the frequency response of the all-pass filter is controlled by a set of parameters with each parameter for a specified frequency range. For each image block, the best parameter is chosen from the set and is sent to the decoder as a side information along with the result of corresponding WDCT computation. For actual implementation, the combination of the all-pass IIR filters and the DCT can be viewed as a cascade of a warping matrix and the DCT matrix, or as a filter bank which is obtained by warping the frequency response of the DCT filter bank. Hence, the WDCT can be implemented by a single matrix computation like the DCT. The WDCT based compression, outperforms the DCT based compression, for high bit rate applications and for images with high frequency components.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8B
• /
• pp.1586-1592
• /
• 1999

In DWMT, CMFB is employed in the synthesis/analysis part. The CMFB uses filters of greater length than the DFT, resulting in reduced interference between the carriers. In addition, the CMFB system is computationally efficient and fast algorithms are available for their implementation. Traditional designs for the prototype filters of CMFB usually involve nonlinear optimizations. Thus the required design time is considerably large even for small filter orders. In this paper, a prototype filter design method for CMFB is presented using optimal window method. The design process is reduced to the optimization of a single parameter and consequently the required design time is much less than those of the existing methods. It is shown that the stopband performance of the proposed method is better than that of the Kaiser window method.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.315-315
• /
• 2006