• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제16회 학술발표회 논문개요집
• /
• pp.178-178
• /
• 1998

• 자원리싸이클링
• /
• 제11권1호
• /
• pp.37-42
• /
• 2002

This study was conducted in order to remove Poly vinyl chloride(PVC) from the waste plastic film mixture. The fittings of Air Table was modified to increase the separation efficiency of PVC and PE(poly ethylene). PE and PVC was successfully separated from PVC-PE film mixture with the yield of PE 90% or more and with his grade of 99% or more, using the improved Air Table. The details of the separation condition and results will be discussed in this paper. Dry separation, Waste plastic film, PVC, Air Table. The details of the separation condition and results will be discussed in this paper.

• Journal of Information Display
• /
• 제12권4호
• /
• pp.173-177
• /
• 2011

The alignment film abrasion caused by the rubbing process was quantitatively evaluated via atomic-force microscopy (AFM). First, a patterned alignment film structure, which was molded through the imprint method, was artificially formed. Then, the surface topography of the alignment film was evaluated via AFM after rubbing, and the degree of abrasion of the alignment film was estimated by subtracting the value after rubbing from the value before rubbing. It was recognized that the degree of abrasion increased with an increase in the rubbing strength. The relationship between the number of rubbing cycles and the degree of abrasion of the alignment film was also estimated.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2003년도 제24회 학술발표회 초록집
• /
• pp.143-143
• /
• 2003

• 한국식품과학회지
• /
• 제44권6호
• /
• pp.711-715
• /
• 2012

생고분자를 이용한 포장 소재에 관한 연구는 많이 이루어지고 있으나 그 것의 상업적 식품 적용은 순수 생고분자의 비용과 생고분자 소재의 불충분한 물리적 성질에 의해 많은 제한을 받고 있다. 본 연구에서는 식품 가공 부산물인 DMM과 WPI를 이용하여 가식성 적층필름을 개발하였다. WPI 필름과의 적층을 통해 DMM 필름의 신장성과 열접합강도를 높일 수 있었고, 이로써 적층기술이 DMM 필름의 식품 포장에서의 적용 가능성을 높이는 방법으로 제시될 수 있었다. DMM 외 다른 식품 가공 부산물을 기초로 한 생고분자 필름들 개발에 있어서도 그들의 식품 적용성 향상의 방법으로 적층방법을 제안할 수 있으리라 사료된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1071-1074
• /
• 2005

TAC film is an indispensable optical component that protects the polarizing PVA (polyvinyl alcohol) film from being deteriorated and gives high durability, due to its unique features. The newly developed technology of controlling the birefringence of TAC film, together with the coating technology of a discotic material layer, enables excellent viewing angle characteristics and a cost-effective roll-to-roll polarizer manufacturing process.

• Journal of Magnetics
• /
• 제4권1호
• /
• pp.22-25
• /
• 1999

Recently we reported the evolutionary transition from the positive magnetoresistance to the negative was discovered in the transverse configuration as the thickness of permalloy film increases. The discovered peculiarities of positive magnetoresistance phenomenal were explained in the framework of the uniform rotation model of the film magnetization reversal.

• Environmental Engineering Research
• /
• 제25권4호
• /
• pp.506-514
• /
• 2020

The current study stresses on the reuse of waste lignocellulose biomass (rice husk and sugarcane bagasse) for the synthesis of carboxymethyl cellulose (CMC) and further conversion of this CMC into a biodegradable film. Addition of commercial starch was done to form biodegradable film due to its capacity to form a continuous matrix. Plasticizers such as Glycerol and citric acid were used to provide flexibility and strength to the film. Biopolymer film obtained from sugarcane bagasse CMC showed maximum tensile strength and elongation in comparison to the film synthesized from commercial CMC and CMC obtained from rice husk. It has been observed that an increase in sodium glycolate/NaCl content in CMC imposed an adverse effect on tensile strength. Opacity, moisture content, and solubility of the film increased with a rise in the degree of substitution of CMC. Therefore, CMC obtained from sugarcane bagasse was better candidate in preparing biopolymer/biocomposite film.

• 센서학회지
• /
• 제22권6호
• /
• pp.400-403
• /
• 2013

The piezoelectric composite film of ferroelectric PZT ceramic ($PbZr_xTi_{1-x}O_3$) and polymer (PDMS, Polydimethylsiloxane) was prepared to improve the flexibility of piezoelectric material. The bar coating method was applied to fabricate flexible nanocomposite film with large surface area by low cost process. In the case of using metal electrode on the composite film, although there is no problem by bending process, the electrode is usually broken away from the film by stretching process. However, the well-attached, flexible CNT electrode on PZT/PDMS film improved flexibility, especially stretchability. PZT particles was usually settled down into polymer matrix due to gravity of the weighty particle, so to improve the dispersion of PZT powder in polymer matrix, small amount of additives (CNT powder, Carbon nanotube powder) was physically mixed with the matrix. By stretching the film, an output voltage of PZT(70 wt%)/PDMS with CNT (0.5 wt%) was measured.

• The Korean Journal of Ceramics
• /
• 제7권2호
• /
• pp.55-57
• /
• 2001

For the fast dry of the aqueous tape, the process which water was replaced by organic solvent was proposed. Socalled, it was the solvent washing dry. Three organic solvents (methanol, ethanol and acetone) were selected for the washing solvent. The weight loss of the washed tapes was measured to evaluate the dry rate of the tapes and dried tapes were examined the generation of the cracks with the variations of the organic solvent and the washing time. Methanol, ethanol and acetone were available organic solvents for this method. The tapes washed in methanol, ethanol and acetone were dried rapidly for twenty minutes. After thirty minutes, the weight losses were not found any more. The solvent of the lower surface tension can decreases the crack of dried tape. If solvent substitutes water completely, though it was fast dried, crack can be eliminated.