• Journal of information and communication convergence engineering
• /
• 제1권1호
• /
• pp.23-26
• /
• 2003

A photodiode capable of obtaining a sufficient photo/dark current ratio at both a forward bias state and a reverse bias state is proposed. The photodiode includes a glass substrate, an aluminum film formed as a lower electrode over the glass substrate, an alumina film formed as a schottky barrier over the aluminum film, a hydrogenated amorphous silicon film formed as a photo conduction layer over a portion of the alumina film, and a transparent conduction film formed as an upper electrode over the hydro-generated amorphous silicon film. Growth of high quality alumina($Al_{2}O_{3}$) film using anodizing technology is proposed and analyzed by experiment. We have obtained the film with a superior characteristics

• 한국안전학회지
• /
• 제18권3호
• /
• pp.60-63
• /
• 2003

For the increase the charge stability of teflon electrets for used at uncomfortable industrial circumstances with high temperature or humidity, We made an investigation into double layer effect of teflon electrets. Teflon AF film was spincoated on FEP film and then the charge storage property of AF/FEP dual film was investigated to be compared with FEP film. It was found that the AF/FEP dual film has higher surface potential than FEP film on the repeated charging and annealing process. It seems that AF/FEP dual film has higher thermal stability than FEP film through TSC measurement. If the investigations of the double layer effect of Teflon film carried out more closely with it's molecular structures and surface conditions, it may be effectively improved the stability of charge storage.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.397-405
• /
• 2000

Many computational researches have been performed about EHL film thickness in the contact between cam and follower. However, those computations do not explain the characteristics of dynamic film thickness which means squeeze film effect. Without the consideration of transient term in the Reynold's equation, the predicted film thickness has large difference from the actual film thickness. In this study, we have investigated the kinematic and dynamic simulations of rocker-arm valve train system. From the simulation, the applied load and the entraining velocity of the lubricant between cam and follower are obtained and with these values the dynamic film thickness is computed by Newton-Raphson method and compared with the steady state film thickness.

• 한국콘텐츠학회논문지
• /
• 제9권5호
• /
• pp.128-136
• /
• 2009

한국의 영상산업은 주로 서울과 수도권에 편중되어 있다. 최근 지방자치단체들이 영상산업에 관심을 기울이면서 지역별로 영상 클러스터 구축 사업을 본격적으로 전개하고 있다. 특히 노무현 정부에서 시행된 지역 분권형 구조는 현 정부의 중앙 집중형 개발과는 차이를 가진다. 최근 일부에서는 한국의 영상 클러스터 구축이 서울을 중심으로 전개되어야 한다는 주장이 제기되고 있다. 특히 부산 이전이 확정된 영상관련 공공기관 이전 역시 백지화하여야 한다는 주장이 제기되었다. 그러나 한국영상산업의 발전을 위해서는 영상 클러스터 구축사업에 있어 부산을 집중 육성하고 공공기관 이전도 예정대로 진행되어야 한다는 것이다.

• 지식경영연구
• /
• 제12권3호
• /
• pp.1-25
• /
• 2011

This research empirically examined the determinants of competitive advantages and performance of Korean film industry from 1996 to 2003 over a sample of 396 movies. Especially, the effects of knowledge-based resources, social capital, product differentiation strategy, and market entry strategy on a film performance were hypothesized and empirically tested. Findings of this study are as follows; First, confirming the importance of knowledge-based resources in film industry, both the superior business track records of producers and the superior artistic track records of directors and actors had positive effects on film performance. Second, supporting social capital hypotheses, while the strong ties between directors and producers had positive effects, the strong ties between directors and actors had negative effects on film performance. Third, confirming the importance of product differentiation strategy, genre differentiation against competing films had positive effects on film performance. Finally, confirming the importance of market entry timing, the number of competing films released following a film opening within a week had negative effects on film performance. The findings of this research suggest that producers, directors, and actors are not only the critical knowledge-based resources to create competitive advantages indeed, but the pattern of relationships among them also systematically influences the film performance. Moreover, it is suggested that film performance may be improved by the proper genre differentiation and opening day selection.

• Corrosion Science and Technology
• /
• 제2권4호
• /
• pp.171-177
• /
• 2003

The electronic properties of the passive film formed on Fe-20Cr ferritic stainless steel in pH 8.5 buffer solution containing 0.05 M EDTA (ethylene diammine tetraacetic acid) were examined by the photocurrent measurements and Mott-Schottky analysis for the film. XPS depth profile for the film demonstrated that Cr content in the outermost layer of the passive film was higher in the solution with EDTA than that in the solution without EDTA, due to selective dissolution of Fe by EDTA. In the solution with EDTA, the passive film showed characteristics of an amorphous or highly disordered n-type semiconductor. The band gap energies of the passive film are estimated to be ~ 3.0 eV, irrespective of film formation potential from 0 to 700 $mV_SCE$ and of presence of EDTA. However, the donor density of the passive film formed in the solution with EDTA is much higher than that formed in the solution without EDTA, due to an increase in oxygen vacancy resulted from the dissolution of Fe-oxide in the outermost layer of the passive film. These results support the proposed model that the passive film formed on Fe-20Cr in pH 8.5 buffer solution mainly consists of Cr-substituted $\gamma$-$Fe_2O_3$.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권9호
• /
• pp.1470-1476
• /
• 2020

Objective: This study was carried out to investigate physicochemical properties, and antioxidant and antimicrobial activities of low-fat sausages (LFSs) covered with sodium alginate (SA) film alone and with powder film (TSA-film) formed by cross-linking cherry tomato powder (CTP) and SA with calcium chloride (CaCl₂). Methods: Sausages covered with the biodegradable film were assessed based on the measurement of pH, color (L^⋆, a^⋆, b^⋆), proximate analysis, expressive moisture (EM), texture profile analysis, total plate counts (TPC), violet red bile, and 2-Thiobarbituric acid reactive substances (TBARS) during storage under refrigeration. LFSs wrapped with TSA-film were compared with those wrapped with SA-film and without film (control) during storage at 10℃ for 35 days. Results: The LFSs covered with the mixed film had lower pH, lightness (L^⋆), EM%, TBARS, and TPC, but lower yellowness (b^⋆) and hardness values than those wrapped with TSA-film alone. Conclusion: Lipid oxidation and microbial growth was retarded in sausages covered with biodegradable films, especially multiple films as compared to single film, thereby resulting in extended shelf-life of the LFSs.

• 복식
• /
• 제50권3호
• /
• pp.117-131
• /
• 2000

The purpose of this study is for affirmation about fashion and film industry has very important relationship through the image of film fashion in 1990. To this processing , films in 1990 were analyzed by the back ground, time place, persons's status are expressed in period movie but the person's characters, development of story mood in contemporary movies. The contents of this study are as follows : First, film fashion which was related mass fashion design and concept development and fashion designers as constume services were considered. Second, the change of star image through the 20th century. The roles and new image of film fashion in period movies and contemporary movies in 1990 were searched. Third, proposal and results were confirmed for expansion of fashion industry and film industry together. Finally, from the latter of 20th century, a lot of fashion designers have participated in film works than before, So the images of films were sued and reflected as new mass trend . Especially retro-romantic mood was expressed in fashion trend due to period movie fashion. Also minimal city look and elegance glamourous look are represented cause of contemporary movie fashion. Therefore, the cooperation between film productions and fashion professionals is very important for promotion of Korean culture development in 21st century, 'the century of image'.

• 반도체디스플레이기술학회지
• /
• 제11권2호
• /
• pp.45-51
• /
• 2012

Multilayer co-extrusion blown film construction is a popular technique for producing plastic films for various packaging industries. Automated detection of defective films can improve the quality of film production process. In this paper, we propose a film inspection system that can detect and classify film defects robustly. In our system, first, film images are acquired through a high speed line-scan camera under an appropriate lighting system. In order to detect and classify film defects, an inspection algorithm is developed. The algorithm divides the typical film defects into two groups: intensity-based and texture-based. Intensity-based defects are classified based on geometric features. Whereas, to classify texture-based defects, a texture analysis technique based on local binary pattern (LBP) is adopted. Experimental results revealed that our film inspection system is effective in detecting and classifying defects for the multilayer co-extrusion blown film construction line.

• 센서학회지
• /
• 제27권6호
• /
• pp.386-391
• /
• 2018

To analyze the film cooling in a liquid rocket engine, it is necessary to understand the characteristics of the wall-impingement liquid film. We designed an optimal two-dimensional device for measuring the thickness of the liquid film thickness. This device quantitatively measures the liquid-film thickness distribution. In previous liquid-film thickness measuring devices, the liquid film was formed over the entire area of the sensor. However, its formation depended on injection conditions. To compensate for this, optimal resistors are selected. Additionally, saturation variations with partial saturation are analyzed. Furthermore, calibration using the enhanced plate method is conducted with improvements in spatial resolution. The device designed here can be used to analyze the properties of an impingement liquid film with a slit injector. This study can be used for film-cooling analysis in liquid rocket engines.