• Restorative Dentistry and Endodontics
• /
• v.42 no.4
• /
• pp.332-341
• /
• 2017

Objectives: To determine the incidence of crack formation and propagation in apical root dentin after retreatment procedures performed using ProTaper Universal Retreatment (PTR), Mtwo-R, ProTaper Next (PTN), and Twisted File Adaptive (TFA) systems. Materials and Methods: The study consisted of 120 extracted mandibular premolars. One millimeter from the apex of each tooth was ground perpendicular to the long axis of the tooth, and the apical surface was polished. Twenty teeth served as the negative control group. One hundred teeth were prepared, obturated, and then divided into 5 retreatment groups. The retreatment procedures were performed using the following files: PTR, Mtwo-R, PTN, TFA, and hand files. After filling material removal, apical enlargement was done using apical size 0.50 mm ProTaper Universal (PTU), Mtwo, PTN, TFA, and hand files. Digital images of the apical root surfaces were recorded before preparation, after preparation, after obturation, after filling removal, and after apical enlargement using a stereomicroscope. The images were then inspected for the presence of new apical cracks and crack propagation. Data were analyzed with ${\chi}^2$ tests using SPSS 21.0 software. Results: New cracks and crack propagation occurred in all the experimental groups during the retreatment process. Nickel-titanium rotary file systems caused significantly more apical crack formation and propagation than the hand files. The PTU system caused significantly more apical cracks than the other groups after the apical enlargement stage. Conclusions: This study showed that retreatment procedures and apical enlargement after the use of retreatment files can cause crack formation and propagation in apical dentin.

• Imaging Science in Dentistry
• /
• v.30 no.1
• /
• pp.55-62
• /
• 2000

Purpose: This study was performed to develop the electronic textbook (CD-rom title) about preclinical practice of oral and maxillofacial radiology, using multimedia technology with interactive environment. Materials and Methods: After comparing the three authoring methods of multimedia, i.e. programming language, multimedia authoring tool and web authoring tool, we determined the web authoring tool as an authoring method of our electronic textbook. Intel Pentium II 350 MHz IBM-compatible personal computer with 128 Megabyte RAM, Umax Powerlook flatbed scanner with transparency unit, Olympus Camedia l400L digital camera, ESS 1686 sound card, Sony 8 mm Handycam, PC Vision 97 pro capture board, Namo web editor 3.0, Photoshop 3.0, ThumbNailer, RealPlayer 7 basic and RealProducer G2 were used for creating the text document, diagram, figure, X-ray image, video and sound files. We made use of javascripts for tree menu structure, moving text bar, link button and spread list menu and image map etc. After creating all files and hyperlinking them, we burned out the CD-rom title with all of the above multimedia data, Netscape communicator and plug in program as a prototype. Results and Conclusions : We developed the dental radiology electronic textbook which has 9 chapters and consists of 155 text documents, 26 figures, 150 X-ray image files, 20 video files, 20 sound files and 50 questions with answers. We expect that this CD-rom title can be used at the intranet and internet environments and continuous updates will be performed easily.

• The Journal of the Korea Contents Association
• /
• v.18 no.9
• /
• pp.710-721
• /
• 2018

In this study, we have suggested a method to create 3D animation based on STL files which are easily available on the internet using Blender, which is one of the most popular open-source 3D modeling SW. And the procedure of making 3D animation using STL file was compared with those for OBJ or FBX files as well. Contrary to OBJ and FBX, STL files do not contain information regarding hierarchy, material and texture which are very important in making 3D animation. Especially the absence of hierarchy may cause serious problems in rigging, which involves movement of unwanted parts of 3D object during rigging process. It is demonstrated that the weight painting feature of Blender could be a solution to tackle the faulty rigging due to attributes of STL files. The effect of the sampling frequency and the resolution on the rendering time is also investigated with respect to the 3D mantis animation. It is also seen that insect models by 3D printer could be used as a new type of pedagogical material in the elementary science education.

• Restorative Dentistry and Endodontics
• /
• v.37 no.4
• /
• pp.201-206
• /
• 2012

Objectives: The purpose was to investigate the preference and usage technique of NiTi rotary instruments and to retrieve data on the frequency of re-use and the estimated incidence of file separation in the clinical practice among general dentists. Materials and Methods: A survey was disseminated via e-mail and on-site to 673 general dentists. The correlation between the operator's experience or preferred technique and frequency of re-use or incidence of file fracture was assessed. Results: A total of 348 dentists (51.7%) responded. The most frequently used NiTi instruments was ProFile (39.8%) followed by ProTaper. The most preferred preparation technique was crown-down (44.6%). 54.3% of the respondents re-used NiTi files more than 10 times. There was a significant correlation between experience with NiTi files and the number of re-uses (p = 0.0025). 54.6% of the respondents estimated experiencing file separation less than 5 times per year. The frequency of separation was significantly correlated with the instrumentation technique (p = 0.0003). Conclusions: A large number of general dentists in Korea prefer to re-use NiTi rotary files. As their experience with NiTi files increased, the number of re-uses increased, while the frequency of breakage decreased. Operators who adopt the hybrid technique showed less tendency of separation even with the increased number of re-use.

• Restorative Dentistry and Endodontics
• /
• v.43 no.1
• /
• pp.3.1-3.10
• /
• 2018

Objectives: The aim of this study was to compare root canal volume change and canal transportation by Vortex Blue (VB; Dentsply Tulsa Dental Specialties), ProTaper Next (PTN; Dentsply Maillefer), and ProTaper Universal (PTU; Dentsply Maillefer) nickel-titanium rotary files in curved root canals. Materials and Methods: Thirty canals with $20^{\circ}-45^{\circ}$ of curvature from extracted human molars were used. Root canal instrumentation was performed with VB, PTN, and PTU files up to #30.06, X3, and F3, respectively. Changes in root canal volume before and after the instrumentation, and the amount and direction of canal transportation at 1, 3, and 5 mm from the root apex were measured by using micro-computed tomography. Data of canal volume change were statistically analyzed using one-way analysis of variance and Tukey test, while data of amount and direction of transportation were analyzed using Kruskal-Wallis and Mann-Whitney U test. Results: There were no significant differences among 3 groups in terms of canal volume change (p > 0.05). For the amount of transportation, PTN showed significantly less transportation than PTU at 3 mm level (p = 0.005). VB files showed no significant difference in canal transportation at all 3 levels with either PTN or PTU files. Also, VB files showed unique inward transportation tendency in the apical area. Conclusions: Other than PTN produced less amount of transportation than PTU at 3 mm level, all 3 file systems showed similar level of canal volume change and transportation, and VB file system could prepare the curved canals without significant shaping errors.

• Restorative Dentistry and Endodontics
• /
• v.24 no.4
• /
• pp.633-638
• /
• 1999

The purpose of our study is to evaluate the ability of nickel-titanium(NiTi) files in maintaining the original curvature of a curved root canal during canal preparation. Curved canals on translucent resin blocks were prepared with Profiles and stainless steel files and they were placed at the platform which can reproduce the same position. The unprepared and prepared canal forms were accurately compared by double exposure technique of photography. The results were as follows : 1 NiTi files made a canal comparatively taper, but stainless steel files didn't make a canal taper, wicest at midportion and comparatively wide at a apical portion. 2. Canals preparations with no. 25 Profile.06 up to the working length were most excellent in taperness and in maintaining the original curvature. Canals prepared with no 30 Profile.06 up to the working length made a little outer transportation at a apical portion, but not severe. 3. Canal preparations with Profile GT were excellent in taperness and in maintaining the original curvature, but made more enlargement toward the inner side at the starting portion of the curvature. 4. Canal preparations with stainless steel files were not tapered and provided the largest transportation.

• Convergence Security Journal
• /
• v.8 no.4
• /
• pp.65-71
• /
• 2008

According to the capacity of hard disk drive is increasing day by day, the amount of data that forensic investigators should analyze is also increasing. This trend need tremendous time and effort in determining which files are important as evidence on computers. Using the file system APIs provided by Windows system is the easy way to identify those files. This method, however, requires a large amount of time as the number of files increase and changes the access time of files. Moreover, some files cannot be accessed due to the use of operating system. To resolve these problems, forensic analysis should be conducted by using the Master File Table (MFT). In this paper, We implement the file access program which interprets the MFT information in NTFS file system. We also extensibly compare the program with the previous method. Experimental results show that the presented program reduces the file access time then others. As a result, The file access method using MFT information is forensically sound and also alleviates the investigation time.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.5
• /
• pp.885-896
• /
• 2014

The files in computer storages can be deleted due to unexpected failures or accidents. Some malicious users often delete data by himself for anti-forensics. If deleted files are associated with crimes or important documents in business, they should be recovered and the recovery tool is necessary. The recovery methods and tools for some filesystems such as NTFS, FAT, and EXT have been developed actively. However, there has not been any researches for recovering deleted files in XFS filesystem applied to NAS or CCTV. In addition, since the current related tools are based on the traditional signature detection methods, they have low recovery rates. Therefore, this paper suggests the recovery methods for deleted files based on metadata and signature detection in XFS filesystem, and verifies the results by conducting experiment in real environment.

• The KIPS Transactions:PartC
• /
• v.19C no.4
• /
• pp.215-224
• /
• 2012

Today, individuals and businesses are a lot of paperwork through a computer. So many documents files are creating to digital type. And the digital type files are copied, moved by various media such as USB, E-mail and so on. A careful analysis of these digital materials can be tracked that occurred during the document editing work history. About these research are on the compound document file format, but has not been studied about the new OOXML format that how to analyze linkages between different document files, tracking an internal order, finding unsaved file for identify the process of creating the file. Future, the use of OOXML format digital documents will further increase, these document work history traceability in digital forensic investigation would be a big help. Therefore, this paper on the new OOXML format(has a forensic viewpoint) will show you how to track the internal order and analyze linkages between the files.

• The KIPS Transactions:PartA
• /
• v.17A no.2
• /
• pp.63-72
• /
• 2010

Recently, the need for multimedia devices, such as digital TV, and camcorder has increased. These devices provide many services on multimedia files such as playing, recording, and editing. Throughout these services, in case of storing edited large-scaled multimedia files, existing file system have several capability problems that are taking too much time and requiring disk I/O. In this paper, we propose the use of Linux Ext2 file system based 'Block-Link file (BL-file) system' in order to solve these problems. For the BL-file system, when editing and storing large-scaled files, there is no data input or output but only modification of the metadata. Additionally, by sharing data blocks between multimedia files, we can save disk spaces. Moreover, because the managing of data block sharing information is more convenient than the existing FWAE technique, we can lessen system overhead. The BL-file system is based on Ext2 file system and implemented in a Linux environment, and the usefulness of the proposed technique is validated by applying the Linux multimedia file-editing tool 'Avidemux'.