• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.194-196
• /
• 2022

When electromagnetic wave transmitted from the radar antenna hits the target, a specific type of electric field is formed according to the electrical characteristics and appearance of the target, which is called an RCS pattern. There are various commercial programs that calculate the RCS of the target and plot the RCS pattern. For the analysis of large targets such as warships or ships, a program with a high frequency analysis method, which has a faster calculation speed than the low frequency analysis method is suitable. XGTD, a high-frequency analysis program, can quickly plot a two-dimensional RCS pattern for 360 degrees of a target, but a three-dimensional RCS pattern cannot be obtained. In this paper, it is proposed that a method of plotting two-dimensional RCS patterns of a target from various angles using XGTD, generating a three-dimensional RCS pattern using this, and converting it into a three-dimensional antenna pattern file.

• Restorative Dentistry and Endodontics
• /
• v.34 no.1
• /
• pp.1-7
• /
• 2009

The purpose of this study was to compare the stress distributions of NiTi rotary instruments based on their cross-sectional geometries of triangular shape-based cross-sectional design, S-shaped cross-sectional design and modified rectangular shape-based one using 3D FE models. NiTi rotary files of S-shaped and modified rectangular design of cross-section such as Mtwo or NRT showed larger stress change while file rotation during simulated shaping. The stress of files with rectangular cross-section design such as Mtwo, NRT was distributed as an intermittent pattern along the long axis of file. On the other hand, the stress of files with triangular cross-section design was distributed continuously. When the residual stresses which could increase the risk of file fatigue fracture were analyzed after their withdrawal. the NRT and Mtwo model also presented higher residual stresses. From this result, it can be inferred that S-shaped and modified rectangular shape-based files were more susceptible to file fracture than the files having triangular shape-based one.

• Journal of the Korean Home Economics Association
• /
• v.32 no.3
• /
• pp.105-120
• /
• 1994

The purposes of this research are to find out general trends of mother-adolescent communication and family stress to estimate the differences of communication patterns and family stress according to sociodemographic and communication variables and to analyze communication variables influencing on family stress. The samples were selected from high school students and their mothers and 342 couples were used in final analysis. Barnes & Olson(1982)'s parent-adolescent communication scale(PACI) and McCubbin(1981)'s family stress scale(FILE) were used to measure mother-adolescent communication pattern and family stress. The data were analyzed by frequency, percentage, mean, Chi-square, F-test Duncan-test, multiple regression, Pearson's r, and Chronbach's α. The result are summerized as follows: 1) Mothers highly perceived mother-adolescent open communication pattern but adolescents highly revealed mother-adolescent close communication pattern. The general trends of family stress showed that adolescents stress is higher than mothers. 2) Communication patterns showed significant differences in mother's age, adolescent's sex and communication variables in mother's education and conversation variables. Generally when mothers and adolescents communicated insufficiently and were not satisfied with communication patterns family stress was increased. 3) Family stress was significantly different in communication patterns. Form the regression analysis it was found that communication patterns are crucial to family stress. Especially open communication pattern between mothers and adolescents was the most important among the communication patterns for family stress was reduced.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.5
• /
• pp.82-89
• /
• 1993

In this paper, we proposed the autonomous algorithm of pseudo-exhaustive testing for the multi-level combinational logic circuits. For the processing of shared-circuit that existed in each cone-circuit when it backtracked the path from PO to PI of CUT at the conventional verification testing, the dependent relation of PI-P0 is presented by a dependence matrix so it easily partitioned the sub-circuits for the pseudo-exhaustive testing. The test pattern of sub-circuit's C-inputs is generated using a binary counter and the test pattern of I-inputs is synthesized using a singular cover and consistency operation. Thus, according to the test patterns presented with the recipe cube, the number of test pattrens are reduced and it is possible to test concurrently each other subcircuits. The proposed algorithm treated CUT's net-list to the source file and was batch processed from the sub-circuit partitioning to the test pattern generation. It is shown that the range of reduced ration of generated pseudo-exhaustive test pattern exhibits from 85.4% to 95.8% when the average PI-dependency of ISACS bench mark circuits is 69.4%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.771-773
• /
• 2005

There have been researches about analyzing the information retrieval patterns of log file to efficiently obtain the users' information research patters in web environment. The methods frequently used in their researches is to suggest the algorithms by which the frequent one is derived from the path traversal patterns in efficient way. But one of their general problems is not to provide the proper solution in case of complex, that is, general topological patterns. Therefore this paper tries to suggest a efficient algorithm after defining the general information retrieval pattern.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.1970-1975
• /
• 1996

The characteristics of data traffic on the Ethernet LAN are investigated on the basis of measurements. The analysis on the arrival pattern of packets on the network is found not to be a Poission process but to be Weibull distributions. An analysis of network traffic, packet arrivals are found to exhibit a 'source locality'. It is observed that file transfers are reponsible for about 92% of the traffic on the network. Our results will be useful for modelling purposes.

• Progress in Medical Physics
• /
• v.28 no.3
• /
• pp.129-133
• /
• 2017

The machine log files recorded by a scanning control unit in proton beam therapy system have been studied to be used as a quality assurance method of scanning beam deliveries. The accuracy of the data in the log files have been evaluated with a standard calibration beam scan pattern. The proton beam scan pattern has been delivered on a gafchromic film located at the isocenter plane of the proton beam treatment nozzle and found to agree within ${\pm}1.0mm$. The machine data accumulated for the scanning beam proton therapy of five different cases have been analyzed using a statistical method to estimate any systematic error in the data. The high-precision scanning beam log files in line scanning proton therapy system have been validated to be used for off-line scanning beam monitoring and thus as a patient-specific quality assurance method. The use of the machine log files for patient-specific quality assurance would simplify the quality assurance procedure with accurate scanning beam data.

• Journal of Korea Multimedia Society
• /
• v.6 no.4
• /
• pp.707-713
• /
• 2003

Convenience and promptness of the internet have been not only making the electronic commerce grow rapidly in case of website, analyzing a navigation pattern of the users has been also making personalization and customization techniques develop rapidly for providing service accordant to individual interestingness. Web personalization and customization skill has been utilizing various methods, such as web log mining to use web log data and web mining to use the transaction of users etc, especially e-CRM analyzing a navigation pattern of the users. In this paper, We measure exact duration time of the users in web page and web site, compute weight about duration time each page, and propose a way to comprehend e-loyalty through the computed weight.

• Korean Journal of Agricultural Science
• /
• v.22 no.1
• /
• pp.11-23
• /
• 1995

The CAD/CAM system for the manufacturing automation is the newest technology in mechanical engineering area and becomes the important research subject nowadays. Most of all hardwares and softwares for the CAD/CAM system used in the our manufacturing companies such as automobile company are developed by the foreign country and the purchasing price of them is very expensive but their applicability to a certain area is very limited. This study was conducted to develope a CAD/CAM system for the design and the automatic manufacturing of the iron pattern shaped with 3 - dimensional free curved surface, and to test its applicability to the design and the manufacturing of the rotary blade. The results obtained from the study are as follow; 1. The CAD system which can process graphic procedures from the free curved surface shaped data was developed with personal computer. 2. The CAM main program was developed. This main program could produce CL data from CAD data file by checking the tool interference according to the cutting mode. 3. The sub. program which can simulate the tool trace from the CL data was developed. 4. The post processor for the Deckel FP2NC NC milling machine from CL data file was developed and the sub program could transmit NC program through modem to NC milling machine was developed. 5. The developed CAM system seemed to be applicable to any other system. Because the measuring results of the cross sectional thickness of the plastic model from the manufacturing iron pattern by the system showed that this system could properly check the tool interference. 6. In took 75~90 hours to manufacture two iron patterns of rotary blade. For the sake of convenience in applying to the other systems, this system was developed in BASIC and FORTRAN computer language and minimum portion of machine language as possible.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.4
• /
• pp.775-784
• /
• 2019

Malware infringement attacks are continuously increasing in various environments such as mobile, IOT, windows and mac due to the emergence of new and variant malware, and signature-based countermeasures have limitations in detection of malware. In addition, analytical performance is deteriorating due to obfuscation, packing, and anti-VM technique. In this paper, we propose a system that can detect malware based on machine learning by using similarity hashing-based pattern detection technique and static analysis after file classification according to packing. This enables more efficient detection because it utilizes both pattern-based detection, which is well-known malware detection, and machine learning-based detection technology, which is advantageous for detecting new and variant malware. The results of this study were obtained by detecting accuracy of 95.79% or more for benign sample files and malware sample files provided by the AI-based malware detection track of the Information Security R&D Data Challenge 2018 competition. In the future, it is expected that it will be possible to build a system that improves detection performance by applying a feature vector and a detection method to the characteristics of a packed file.