• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.4
• /
• pp.451-456
• /
• 2008

In this paper. we experimented and analyzed about evaporation and breaking process of filament by external flames and adsorption pattern in lamp bulb of evaporated filament particle according to the set-up directions of incandescent lamps. In the results of experiments, we could know that filament evaporation behavior of incandescent lamp that is established by down direction happened most vigorously and is difference in adsorption pattern of filament particle that is vaporized according to set-up directions. Also, glass bulbs were melted and filaments were evaporated by external flames, and finally molten marks were discriminated. We expect that become important data that this study finding reveals burnout cause of incandescent lamp in scene of a fire.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2004.11a
• /
• pp.5-5
• /
• 2004

• Proceedings of the Korean Fiber Society Conference
• /
• 1994.10a
• /
• pp.97-98
• /
• 1994

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.2
• /
• pp.56-65
• /
• 1999

The relationship of the winding process variables and the mechanical properties of filament wound composites is investigated experimentally. The winding process variables considered are the fiber tensions and the fiber ends. The filament wound ring specimens are fabricated using 3-axis controlled filament winding machine. Two types of carbon fibers, TZ-507 and IZ-40, are used as reinforcements and epoxy for filament winding is used as resin. During the winding process, the fiber tensions are varied from 0.5kgf to 3.0kgf, and the number of the fiber ends are varied from 1 to 6. The fiber volume fractions and the void contents for the ring specimens are measured through the resin digestion. The mechanical properties of the ring specimens are also evaluated by the split disk test. The test results show that the winding process variables affect the fiber volume fractions and the void contents of the ring specimens, which result in the variation of the tensile properties of the ring specimens. Therefore, suitable winding process variables should be applied to maximize the structural performance and the productivity for filament wound structures.

• Korean Journal of Microbiology
• /
• v.31 no.3
• /
• pp.197-202
• /
• 1993

The budding yeast S. cerevisiae contains 10-nm filament ring that lies just inside the plasma memhrane in the region of the mother-bud neck. It is possihle that CDC3. CDCIO, CDCII. CDCI2 genes encode the filaments. Recently it has been shown that the CDC3 and CDCI2 gene products arc localized to [he vicinity of the neck lilaments by immunolluorescence. However. the role of the lilament ring is not clear. In order to find out the role of filament ring. I have tried to clone the similar gene in S. pomhe to the CDC3 in S. cerevisiae. Genomic library was constructed by use of $\lambda$gtll expression vector and screened with CDC3 antibodies. From sequencing data, there were more than two introns in the newly cloned gene. There was 62% homology between the part of the predicted amino acid sequence of cloned gene and CDC3 amino acid sequence.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.2
• /
• pp.94-101
• /
• 2017

Tow Prepreg is the intermediate material for filament winding process that has been "pre-impregnated fiber tow" with resin system. As "dry filament winding" process emerges as a reliable alternative to conventional filament winding (called "wet filament winding") process, interest in tow prepreg as a material for dry filament winding is rising as well. In this article, we have reviewed the recent research trends in carbon fiber tow prepreg for high-performance rocket motor cases, fuel tanks for hydrogen vehicles and other high-quality commercial pressure vessels.

• Composites Research
• /
• v.14 no.2
• /
• pp.8-12
• /
• 2001

Filament Winding Process is a comparatively simple operation in which continuous reinforcements in the form of roving are wound over a rotating mandrel. It is well established and versatile method for storage tanks and pipes for the chemical and other industries. In this study, tensile strength of a filament wound ring specimens were evaluated by a split disk test fixture and a dress disk test fixture. The results obtained from experiments were compared with the theoretical values from the rule of mixtures. The purpose of this paper is the suggestion of an appropriate test method for the evaluation of tensile properties of filament wound structures. The tensile strength of a ring specimen tested by the dress disk test showed better agreement with the theoretical values than those tested by the split disk test because of higher stress concentration in edges of a split disk test fixture. The results showed that the tensile strength of a ring specimen was influenced by the geometry of test fixture, the continuity of fibers, fiber-tension, fiber-end and stress concentration in specimen.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.1
• /
• pp.135-139
• /
• 2002

By means of correlation analysis and path coefficient analysis, 18 characteristics of 325 conserved silkworm races were studied for the selecting efficiency on main silk quality characteristics. The result showed that selecting lines with heavier cocoon weight are beneficial to raise the weight of have. Choosing strains with higher cocoon shell percentage, longer filament length and better reelability percentage is good for increasing non-broken filament length. Selecting lines with medium daily weight of have produced in the fifth instar, medium cocoon shell percentage and simultaneously selecting heavier cocoon shell weight are favorable to promote reelability percentage. Choosing strains with heavier cocoon weight, higher cocoon shell percentage, heavier daily weight of bave produced in the fifth instar and heavier weight of bave but shorter filament length may hopefully breed out a race with thick filament size. And selecting strains with heavier weight of have and fine filament size are beneficial to increase filament length. Selecting lines with higher cocoon shell percentage and heavier weight of bave are favorable to raise raw silk percentage of cocoon. There are no significant direct or indirect correlation coefficient between viability and major characteristics of silk quality. It is, therefore, feasible to breed a silkworm race with excellent vitality and good silk quality as well.

• Applied Microscopy
• /
• v.48 no.3
• /
• pp.55-61
• /
• 2018

The synaptic vesicle is a specialized structure in presynaptic terminals that stores various neurotransmitters. The actin filament has been proposed for playing an important role in mobilizing synaptic vesicles. To understand the role of actin filament on synaptic vesicle pooling, we characterized synaptic vesicles and actin filament after treatment of brain-derived neurotrophic factor (BDNF) or Latrunculin A on primary cultured neuron from rat embryo hippocampus. Western blots revealed that BDNF treatment increased the expression of synapsin I protein, but Latrunculin A treatment decreased the synapsin I protein expression. The increased expression of synapsin I after BDNF disappeared by the treatment of Latrunculin A. Three-dimensional (3D) tomography of synapse showed that more synaptic vesicles localized near the active zone and total number of synaptic vesicles increased after treatment of BDNF. But the number of synaptic vesicle was 2.5-fold reduced in presynaptic terminals and the loss of filamentous network was observed after Latrunculin A application. The treatment of Latruculin A after preincubation of BDNF group showed that synaptic vesicle number was similar to that of control group, but filamentous structures were not restored. These data suggest that the actin filament plays a significant role in synaptic vesicles pooling in presynaptic terminals.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.54-54
• /
• 2018

To optimize the deposition parameters of diamond films, the temperature, pressure, and distance between the filament and the susceptor need to be considered. However, it is difficult to precisely measure and predict the filament and susceptor temperature in relation to the applied power in the hot filament chemical vapor deposition (HFCVD) system. In this study the temperature distribution inside the system was numerically calculated for the applied powers of 12, 14, 16 and 18 kW. The applied power needed to achieve the appropriate temperature at a constant pressure and other conditions was deduced, and applied to actual experimental depositions. The numerical simulation was conducted using the commercial computational fluent dynamics software, ANSYS-FLUENT. To account for radiative heat-transfer in the HFCVD reactor, the discrete ordinate (DO) model was used. The temperatures of the filament surface and the susceptor at different power levels were predicted to be 2512 ~ 2802 K, and 1076 ~ 1198 K, respectively. Based on the numerical calculations, experiments were performed. The simulated temperatures for the filament surface were in good agreement with experimental temperatures measured using a 2-color pyrometer. The results showed that the highest deposition rate and the lowest deposition of non-diamond was obtained at a power of 16 kW.