• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.5
• /
• pp.87-96
• /
• 2017

This study focuses on the Andong Hahoe Village and seeks to identify the shape of the walls since the 1970s. The change of walls can be divided into four periods based on characteristics of materials, shape and distribution. The following is a summary of the results: First, In the 1970s, when Andong Hahoe Village was not designated as a cultural heritage, roof tiles hung on the earthen walls in the middle of the village were major forms. On the outside of the village, rice straw and pine needles were put on the earthen walls or bush clover walls were put in place around if walls were not built. Second, after being designated as a cultural heritage in the 1980s, readjustments for cultural heritages were carried out at the primary stage. However, the distribution of cultural heritages and major changes were not determined at this time since readjustments were mainly focused on the renovation of derelict houses or maintenance of infrastructures. Third, in the past the use of stone bricks for the Hahoe Village site had been difficult, but in the 1990s, replacements with soil-stone walls were identified and the usage of roof tiles increased. The portion of earthen walls, which used to be the major form in the prior era, decreased and this seems to have continued until the 2000s. Fourth, via a field survey, it was found that most of Hahoe village walls consisted of soil cement bricks mixed with cement, steel, lime, gravel. etc. Also, the scope of straw-stricken walls and bush clover walls were reduced to a section of area outside of the village. Fifth, from the 1970s to the present, there were changes to the walls in Hahoe Village including an increase in usages of new materials and an expansion of houses with tiled roofs on top in accordance with the replacement of walls of existing houses. Relevant reasons for this have been identified, such as the fading value of Fungsui(風水) and lack of original records, insufficient awareness and expertise in non-building areas, and the relationship between residents on repairing the wall.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.1
• /
• pp.35-41
• /
• 2006

Purpose: A various find of radiotherapy treatment plans have been made to determine appropriate doses for breasts, chest walls and loco-regional lymphatics in the radiotherapy of breast cancers. The aim of this study was to evaluate the optimum radiotherapy plan technique method by analyzing dose distributions qualitatively and quantitatively. Materials and Methods: To evaluate the optimum breast cancer radiotherapy plan technique, the traditional method(two dimensional method) and computed tomography image are adopted to get breast volume, and they are compared with the three-dimensional conformal radiography (3DCRT) and the intensity modulated radiotherapy (IMRT). For this, the regions of interest (ROI) such as breasts, chest walls, loco-regional lymphatics and lungs were marked on the humanoid phantom, and the computed tomography(Volume, Siemens, USA) was conducted. Using the computed tomography image obtained, radiotherapy treatment plans (XiO 5.2.1, FOCUS, USA) were made and compared with the traditional methods by applying 3DCRT and IMRT. The comparison and analysis were made by analyzing and conducting radiation dose distribution and dose-volume histogram (DVH) based upon radiotherapy techniques (2D, 3DCRT, IMRT) and point doses for the regions of interest. Again, treatment efficiency was evaluated based upon time-labor. Results: It was found that the case of using 3DCRT plan techniques by getting breast volume is more useful than the traditional methods in terms of tumor delineation, beam direction and confirmation of field boundary. Conclusion: It was possible to present the optimum radiotherapy plan techniques through qualitative and quantitative analyses based upon radiotherapy plan techniques in case of breast cancer radiotherapy. However, further studies are required for the problems with patient setup reproducibility arising from the difficulties of planning target volume (PVT) and breast immobilization in case of three-dimensional radiotherapy planning.

• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.95-105
• /
• 2005

This study was carried out to file up using effect and requirement of energy for environmental design data of Pleurotus eryngii growing houses. Heating and cooling Degree-Hour (D-H) were calculated and compared for. some Pleurotus eryngii growing houses of sandwich-panel (permanent) o. arch-roofed(simple) type structures modified and suggested through field survey and analysis. Also thermal resistance (R-value) was calculated for the heat insulating and covering materials of the permanent and simple-type, which were made of polyurethane or polystyrene panel and $7\~8$ layers heat conservation cover wall. The variations of heating and cooling D-H simulated for Jinju area was nearly linearly proportional to the setting inside temperatures. The variations of cooling D-H was much more sensitive than those of heating D-H. Therefore, it was expected that the variations of required energy in accordance with setting temperature or actual temperature maintained inside of the cultivation house could be estimated and also the estimated results of heating and cooling D-H could be effectively used far the verification of environmental simulation as well as for the calculation of required energy amounts. When the cultivation floor areas are all equal, panel type houses to be constructed by various combinations of materials were found to by far more effective than simple type pipe house in the aspect of energy conservation maintenance except some additional cost invested initially. And also the energy effectiveness of multi-span house compared to single span together with the prediction of energy requirement depending on the level insulated for the wall and roof area could be estimated. Additionally, structural as well as environmental optimizations are expected to be possible by calculating periodical and/or seasonal energy requirements for those various combinations of insulation level and different climate conditions, etc.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.3
• /
• pp.180-186
• /
• 1985

Field and phytotron experiments were conducted to determine the effect of morphological growth stage and environmental temperature on Weender components and net energy lactation (NEL) in corn cv. Blizzard and sorghum cv. Pioneer 931 and Sioux at Munich Technical University from 1978 to 1981. Various growth stages of maize and sorghum were grown for 42 days at 4 temperature regimes (30/25, 25/20, 28/18 and 18/8 degree C) and mid-summer sunlight over 13 hour days. The results obtained are summarized as follows: 1. Accumulation of crude protein in maize and sorghum plants was associated with leaf weight ratio and leaf area ratio ($P{\leq}0.1%$). Crude protein in the plants were shown to have a greate synthesis rates at early growth stages. The highest concentration of crude protein were found at 3-leaf stage with 31.4% and 33.9% for maize and sorghum, respectively. 2. Synthesis of crude fiber was increased after growing point differentiation markedly and were shown the highest concentration at heading stage with 28.4% and 31.5% for maize and sorghum, respectively. During the maturities, the crude fiber contents in maize were, however decreased and shown a value of 19.5% at physiological maturity, while that of sorghum were increased continuously. 3. NEL value in maize and sorghum plants were declined as morphological development and shown the lowest at growing point differentiation with 5.82 MJ (maize) and 5.46 MJ/kg (sorghum). During the late maturity, the NEL value of maize were increased markedly and shown a value of 6.70 MJ and 6.94 MJ/kg for milkstage and maturity stage, respectively, while NEL value in sorghum were not increased markedly. 4. Net energy lactation in maize and sorghum plants were associated with synthesis rate of non-structural carbohydrates, especially mono- and disaccharose while cell-wall constituents and crude fiber lowerd NEL contents ($P{\leq}0.1%$). 5. NEL accumulation and starch value were decreased under temperature. The NEL concentration of 4-leaf sorghum under different environmental temperatures of 30/25, 25/20, and 18/8 degree C were 4.87 MJ, 5.46 MJ and 5.81 MJ/kg, respectively.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.4
• /
• pp.267-275
• /
• 2018

The purposes of this study were to analyze the mineralogical characteristics of slaked lime used for wall repair of traditional buildings in Bagan, Myanmar and to evaluate the physical properties of lime plaster produced by the same method as Bagan region. In the X-ray diffraction and thermal analysis of the Myanmar slaked lime, portlandite ($Ca(OH)_2$) and brucite ($Mg(OH)_2$) were detected as main constituent minerals, and a carbonate rock mainly composed of dolomite ($CaMg(CO_3)_2$) minerals may be used as a raw material to make slaked lime. The field-emission scanning electron microscope analysis showed that the Myanmar slaked lime was composed of irregularly shaped crystals of $0.5{\mu}m$ or larger and a small amount of $0.1{\mu}m$ of plate - like crystals. The size and uniformity of crystals in Myanmar lime is different from that of Korea slaked lime. This may be attributed to the effect of the mineral composition and the lime hydration method of Myanmar, which produces slurry by immersing the burnt lime in excess water for a long period of time. The compressive strength of the lime plaster in Myanmar resulted in a mean value of $1.13N/mm^2$ for the specimens cured for 28 days. The strength of the specimens with Bale juice was $1.03N/mm^2$, respectively. The lime is an air setting material that exhibits strength through long carbonation process. Therefore, it is necessary to evaluate physical properties according to curing period through long-term curing over 28 days in the future.

• The Journal of the Petrological Society of Korea
• /
• v.28 no.3
• /
• pp.157-169
• /
• 2019

Pseudotachylytes, produced by frictional heating during seismic slip, provide information that is critical to understanding the physics of earthquakes. We report the results of occurrence, structural characteristics, scanning electron microscopic observation and geochemical analysis of pseudotachylytes, which is presumed to have formed after the Late Cretaceous in outcrops of the Paleoproterozoic granitic gneiss on the Bulil waterfall of the Jirisan area, Yeongnam massif, Korea. Fault rocks, which are the products of brittle deformation under the same shear stress regime in the study area, are classified as pseudotachylyte and foliated cataclasite. The occurrences of pseudotachylyte identified on the basis of thickness and morphology are fault vein-type and injection vein-type pseudotachylyte. A number of fault vein-type pseudotachylytes occur as thin (as thick as 2 cm) layers generated on the fault plane, and are cutting general foliation and sheared foliation developed in granitic gneiss. Smaller injection vein-type pseudotachylytes are found along the fault vein-type pseudotachylytes, and appear in a variety of shapes based on field occurrence and vein geometry. At a first glance fault vein-type seudotachylyte looks like a mafic vein, but it has a chemical composition almost identical to the wall rock of granitic gneiss. Also, it has many subrounded clasts which consist predominantly of quartz, feldspar, biotite and secondary minerals including clay minerals, calcite and glassy materials. Embayed clasts, phenocryst with reaction rim, oxide droplets, amygdules, and flow structures are also observed. All of these evidences indicate the pseudotachylyte formed due to frictional melting of the wall rock minerals during fault slip related to strong seismic faulting events in the shallow depth of low temperature-low pressure. Further studies will be conducted to determine the age and mechanical aspect of the pseudotachylyte formation.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.4
• /
• pp.1-11
• /
• 2020

Noksan is a green area in the form of a hill located inside Gyeongbokgung Palace, unrecognized as a cultural heritage space. This study analyzed the literature and the actual site to derive its landscape meaning by examining the background for the formation of Noksan and how it changed. As a result, the identity of Noksan was related to the geomagnetic vein, pine forest, and deers, and the following are its landscape meaning. First, several ancient maps, including the 「Map of Gyeongbokgung Palace」 depicted the mountain range continuing from Baegaksan(Bugaksan) Mountain to areas inside Gyeongbokgung Palace, and Noksan is a forest located on the geomantic vein, which continues to Gangnyeongjeon Hall and Munsojeon Hall. On Bukgwoldo(Map of Gyeongbokgung Palace), Noksan is depicted with Yugujeong Pavilion, Namyeogo Storage, office for the manager of Noksan, the brook on north and south, and the wall. It can be understood as a prototypical landscape composed of minimal facilities and the forest. Second, the northern palace walls of Gyeongbokgung Palace were constructed in King Sejong's reign. The area behind Yeonjo(king's resting place) up to Sinmumun Gate(north gate of the palace) was regarded as the rear garden when Gyeongbokgung Palace was constructed. However, a new rear garden was built outside the Sinmumun Gate when the palace was rebuilt. Only Noksan maintained the geomantic vein under the circumstance. However, the geographical features changed enormously during the Japanese colonial era when they constructed a huge official residence in the rear garden outside the Sinmumun Gate and the residence of the governor-general and road in the site of the Blue House. Moreover, Noksan was severed from the foothill of Baegaksan Mountain when 'Cheongwadae-ro(road)' was constructed between the Blue House and Noksan in 1967. Third, the significant characteristics and conditions of the forest, which became the origin of Noksan, were identified based on the fact that the geomatic state of the northeastern side of Gyeongbokgung Palace, the naecheongnyong area in geomantic terms(the innermost 'dragon vein' among the veins that stretched out from the central mountain toward the left side), and they planted pine trees to reinforce the 'ground vein' and the fact that it was expressed as the 'Pine Field' before the Japanese Invasion of Korea in 1592. The pine forest, mixed with oaks, cherries, elms, and chestnuts, identified through the excavation investigation, can be understood as the original vegetation landscape. Noksan's topography changed; a brook disappeared due to mounding, and foreign species such as acacia and ornamental juniper were planted. Currently, pine trees' ratio decreased while the forest is composed of oaks, mixed deciduous trees, some ailanthus, and willow. Fourth, the fact the name, 'Noksan,' came from the deer, which symbolized spirit, longevity, eternal life, and royal authority, was confirmed through an article of The Korea Daily News titled 'One of the seven deers in Nokwon(deer garden) in Gyeongbokgung Palace starved to death.'

• Korean Journal of Heritage: History & Science
• /
• v.56 no.1
• /
• pp.80-97
• /
• 2023

By taking wallpaper specimens from Gyeongbokgung Palace, Changdeokgung Palace, and Chilgung Palace preserved from the late Joseon Dynasty to the present, we planned in this study to determine the types and characteristics of the paper used as wallpaper in the Joseon royal family. First, we confirmed the features of paper hanging in the palaces with old literature on the wallpaper used by the royal family based on archival research. Second, we conducted a field survey targeting the royal palaces whose construction period was relatively clear, and analyzed the first layer of wallpaper directly attached to the wall structure after sampling the specimens. Therefore, we confirmed that the main raw material was hanji, which was used as a wallpaper by the royal family, and grasped the types of substances(dyes and pigments) used to produce a blue color in spaces that must have formality by analyzing the blue-colored paper. Based on the results confirmed through the analysis, we checked documents and the existing wallpaper by comparing the old literature related to wallpaper records of the Joseon Dynasty palaces. We also built a database for the restoration of cultural properties when conserving the wallpaper in the royal palaces. We examined the changes in wallpaper types by century and the content according to the place of use by extracting wallpaper-related contents recorded in 36 cases of Uigwe from the 17th to 20th centuries. As a result, it was found that the names used for document paper and wallpaper were not different, thus document paper and wallpaper were used without distinction during the Joseon Dynasty. And though there are differences in the types of wallpaper depending on the period, it was confirmed that the foundation of wallpaper continued until the late Joseon Dynasty, with Baekji(white hanji), Hubaekji(thick white paper), jeojuji(common hanji used to write documents), chojuji(hanji used as a draft for writing documents) and Gakjang(a wide and thick hanji used as a pad). As a result of fiber identification by the morphological characteristics of fibers and the normal color reaction(KS M ISO 9184-4: Graph "C" staining test) for the first layer of paper directly attached to the palace wall, the main materials of hanji used by the royal family were confirmed and the raw materials used to make hanii in buildings of palaces based on the construction period were determined. Also, as a result of analyzing the coloring materials of the blue decorative paper with an optical microscope, ultraviolet-visible spectroscopic analysis(UV-Vis), and X-ray diffraction analysis(XRD), we determined that the type of blue decorative paper dyes and pigments used in the palaces must have formality and identified that the raw materials used to produce the blue color were natural indigo, lazurite and cobalt blue.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.6 no.2
• /
• pp.10-18
• /
• 1988

In the three-dimensional analysis and deformation analysis of large structures, efficient is the use of the multiple method of close range photogrammetry which approaches the object distance. This study analyzes the influence of errors according to the overlap, the control points, and the object distance, to solve the problems which are raised in the multiple method. A wall-board, 7 meters by 3 meters, was used as a test field on which a total of 225 unknown points were equally disposed. The photographs with changing the overlap and object distance were taken by P-31 camera system. a total of 143 negatives are used in this study for computing 3-dimensional coordinates and its standard errors, and bundle adjustment of strips and blocks developed with on-line system is applied. In case of decreasing the number of control points, simulation error increases but actual error decreases and increases again. Due to the changed of object distances Z error represents largely compared to X, Y error, but good results in Z can be obtained by increasing the redundancy. And simulation error or actual error shows best results at the endlap of about 70%. To sum up this study, approprate arrangement of control points and overlap is meaningful, and multiple method by short object distance will be widely used to precision and deformation analysis of critical structures.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.8
• /
• pp.37-44
• /
• 2013

The superiority of bearing ground anchor system has been recognized for the stability and economical efficiency since 1950s in Japan, Europe and etc. The ground anchor introduced in Korea, however, has the structural problem that the tensile strength comes only from the ground frictional force caused by the expansion of the wedge body and it is impossible to evaluate the bearing resistance because the adhering method of the anchor body to hollow wall is not appropriate. In this study, the underreamed ground anchor system was developed so that the bearing pressure of ground anchor can exert as much as possible. And the in-situ tests were performed to evaluate the pullout behavior characteristics and to verify the decreasing effect of the bonded length. The pullout tests were performed with the non-grouted tension condition and grouted tension condition in order to identify the pull-out resistance of each conditions. In addition, it was compared with the results of friction anchor. Finally, the numerical analysis was fulfilled to verify the bearing effect at the bonded part through the detailed modeling by PLAXIS-2D, which is general finite element method analysis program.