• 한국추진공학회지
• /
• 제9권2호
• /
• pp.78-88
• /
• 2005

산화제 주입기 배열 변화에 따른 End-Burning 하이브리드 연소기의 연소실 내부 유동장의 특성 및 온도장 분포도의 경향을 파악하기 위해 수치해석적 연구를 수행하였다. 스월을 동반하는 하이브리드 연소실내 확산 화염의 주요 거동을 얻기 위해 7가지의 다른 O/F 비를 갖는 연소의 기본 특성을 분석하였다. 산화제 주입기의 위치 변화 및 공급방식이 연료와 산화제의 혼합율을 크게 지배하고 온도분포에도 강한 영향을 미치는 것을 확인할 수 있었다. 본 연구에 사용된 여러 산화제 주입기 배열중에서 counter rotating 유동을 유발시키는 주입기가 가장 좋은 혼합효율을 보였으나 벽면 근처에서 관찰된 고온부의 발생 문제가 대두되었다.

• Journal of Magnetics
• /
• 제6권2호
• /
• pp.47-52
• /
• 2001

We present the magnetisation reversal dynamics of epitaxial Fe thin films grown on GaAs(001) and InAs(001) studied as a function of field sweep rate in the range 0.01-160 kOe/s using magneto-optic Kerr effect (MOKE). For 55 and 250 ${\AA}$ Fe/GaAs(001), we find that the hysteresis loop area A follows the scaling relation $A\propto H_{\alpha} \;with\; \alpha=0.03\sim0.05$ at low sweep rates and 0.33~0.40 at high sweep rates. For the 150${\AA}$ Fe/InAs(001) film, $\alpha$is found to be ~0.02 at low sweep rates and ~0.17 at high sweep rates. The differing values of $\alpha$ are attributed to a change of the magnetisation reversal process with increasing sweep rate. Domain wall motion dominates the magnetisation reversal at low sweep rates, but becomes less significant with increasing sweep rate. At high sweep rates, the variation of the dynamic coercivity $H_c{^*}$ is attributed to domain nucleation dominating the reversal process. The results of magnetic relaxation studies for easy-axis reversal are consistent with the sweeping of one or more walls through the entire probed region (~100$\mu m$). Domain images obtained by scanning Kerr microscopy during the easy cubic axis reversal process reveal large area domains separated by zigzag walls.

• 대한조선학회논문집
• /
• 제58권1호
• /
• pp.1-9
• /
• 2021

In the present study, the model-scale Propeller Open Water (POW) tests for the propeller of 176K bulk carrier and 8600TEU container ship were conducted through Computational Fluid Dynamics (CFD) simulation. In order to solve the incompressible viscous flow field, the Reynolds-averaged Navier-Stokes (RaNS) equations were employed as the governing equations. The γ-Reθ(gamma-Re-theta) transition model combined with the SST k-ωturbulence model was introduced to describe the laminar-turbulence transition considering the low Reynolds number of model-scale. Firstly, the flow simulation developing over a flat plate was performed to verify the transition modeling, in which the wall shear stresses were compared with experiments and other numerical results. Then, to investigate the effect of the model, the CFD simulation for the POW test was performed and the simulated propeller performance was validated through comparison with the experiment conducted at Korea Research Institute of Ships & Ocean Engineering (KRISO).

• 지역사회간호학회지
• /
• 제30권3호
• /
• pp.324-335
• /
• 2019

Purpose: The purpose of this study is to understand nursing college life experiences of North Korean Defectors and identify their meanings. Methods: The study collected data through individual in-depth interviews among six undergraduates or graduates from nursing colleges, using phenomenological research methodology of Colaizzi-one of qualitative research approaches. Results: Six categories drawn as a result of research include 'Be bumped against hard reality wall', 'Bondage of discrimination and prejudice', 'Endure and stand with strength of faith', 'Myself grown up along with work', 'Becoming one amid differences', and 'Stepping towards unification'. Conclusion: The result of this study would contribute to understanding academic and interpersonal difficulties North Korean defectors might experience at nursing colleges. And it may also help people to learn that they would play an important role in integration of the nursing fields of South and North Korea as well as the nation's unification. Along the way, the results of the study could be basic data to establish national policy helping North Korean defectors adapt to nursing college life, and develop the supporting system of colleges as well as setting up appropriate supports and measures from the perspective of the nursing field.

• 식품과학과 산업
• /
• 제52권1호
• /
• pp.84-99
• /
• 2019

Dietary fiber is defined as soluble and insoluble polysaccharide consisted in the plant cell wall-associated fibers naturally occurring in fruits, vegetables, and cereal products, and of isolated fibers that are added to processed foods which are also artificially modified. There are so many difference types of dietary fibers as arabinoxylan, polydextrose chicory, oligosccharide. inulin, pectin, bran, cellulose, ${\beta}$-glucan, resistant starch and some seaweed polymers as alginate. Most of them provide many biological benefits in the intestine, as lower risk for developing coronary heart disease, stroke, hypertension, diabetes, obesity and some of the gastrointestinal disease like as colon cancer. And also lowering cholesterol levels, improves glycemic and insulin sensitivity to non-diabetic and diabetic persons including immune system. Beside of many benefits, average consumers in developed and under developing countries take far less amounts of dietary fiber that international organization recommended. Adequate intake of dietary fiber is 14g/1,000kcal base using the energy guide line of 2,000kcal/day for women and 26,000 kcal/day for men, dietary intake is 28g/day of adult women and 36g/day for adult men. The mechanisms behind the reported effects of dietary fiber on metabolic health are not fully well established. It is suggested that changes in intestinal viscosity resulting mucus increasing, macro-nutrients absorption, rate of passage of large intestinal, production of short chain fatty acids by fermentation. Production of gut hormones and changes of microbiota in intestine. It is necessary to do more research in this field in the future and combined interdisciplinary works together.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1119-1126
• /
• 2021

Spacer grid with mixing vane had been widely used in nuclear reactor core. One of the main feather of spacer grid with mixing vane was that strong swirl flow was formed after the spacer grid. The swirl flow not only changed the bubble generation in the near wall field, but also affected the bubble behaviors in the center region of the subchannel. The interaction between bubble and the swirl flow was one of the basic phenomena for the two phase flow modeling in fuel assembly. To obatin better understanding on the bubble behaviors in swirl flow, full three dimension numerical simulations were conducted in the present paper. The swirl flow was assumed in the cylindral calculation domain. The bubble interface was captured by Volume Of Fluid (VOF) method. The properties of saturated water and steam at different pressure were applied in the simulation. The bubble trajectory, motion, shape and force were obtained based on the bubble parameters captured by VOF. The simulation cases in the present study included single bubble with different size, at different angular velocity conditions and at different pressure conditions. The results indicated that bubble migrated to the center in swirl flow with spiral motion type. The lateral migration was mainly related to shear stress magnitude and bubble size. The bubble moved toward the center with high velocity when the swirl magnitude was high. The largest bubble had the highest lateral migration velocity in the present study range. The effect of pressure was small when bubble size was the same. The prelimenery simulation result would be beneficial for better understanding complex two phase flow phenomena in fuel assembly with spacer grid.

• 대한조선학회논문집
• /
• 제58권4호
• /
• pp.243-252
• /
• 2021

The present study aims to investigate the interaction of a wire-type turbulence stimulator and the laminar boundary layer on a flat plate by flow field measurement. For the towing tank tests, a one-dimensional Laser Doppler Velocimetry (LDV) attached on a two-axis traverse was used to measure the streamwise velocity component of the boundary layer flow in zero pressure gradient, disturbed by a turbulence stimulator. The wire diameter was 0.5 and 1.0 mm according to the recommended procedures and guidelines suggested by the International Towing Tank Conference. Turbulence development by the stimulator was identified by the skin friction coefficient, mean and Root Mean Square (RMS) of the streamwise velocity. The laminar boundary layer with the absence of the wire-type stimulator was similar to the Blasius solution and previous experimental results. By the stimulator, the mean and RMS of the streamwise velocity were increased near the wall, showing typical features of the fully developed turbulent boundary layer. The critical Reynolds number was reduced from 2.7×10⁵ to 1.0×10⁵ by the disturbances caused by the wire. As the wire diameter and the roughness Reynolds number (Rek) increased, the disturbances by the stimulator increased RMS of the streamwise velocity than turbulent boundary layer.

• 대한금속재료학회지
• /
• 제49권5호
• /
• pp.388-394
• /
• 2011

High speed copper filling into TSV (through-silicon-via) for three dimensional stacking of Si chips was investigated. For this study, a tapered via was prepared on a Si wafer by the DRIE (deep reactive ion etching) process. The via had a diameter of 37${\mu}m$ at the via opening, and 32${\mu}m$ at the via bottom, respectively and a depth of 70${\mu}m$. $SiO_2$, Ti, and Au layers were coated as functional layers on the via wall. In order to increase the filling ratio of Cu into the via, a PPR (periodic pulse reverse) wave current was applied to the Si chip during electroplating, and a PR (pulse reverse) wave current was applied for comparison. After Cu filling, the cross sections of the vias was observed by FE-SEM (field emission scanning electron microscopy). The experimental results show that the tapered via was filled to 100% at -5.85 mA/$cm^2$ for 60 min of plating by PPR wave current. The filling ratio into the tapered via by the PPR current was 2.5 times higher than that of a straight via by PR current. The tapered via by the PPR electroplating process was confirmed to be effective to fill the TSV in a short time.

• Structural Engineering and Mechanics
• /
• 제77권1호
• /
• pp.137-149
• /
• 2021

In engineering design, the axial equivalent elastic modulus of laminated FRP pipe was mostly calculated by the average elastic modulus method or the classical laminated plate theory method, which are based on relatively simplified assumptions, and may be not accurate enough sometimes. A new analytical calculation method for the axial equivalent elastic modulus of laminated FRP pipe was established based on three-dimensional stress state. By comparing the results calculated by this method with those by the above two traditional analytical methods and the finite element method, it is found that this method for the axial equivalent elastic modulus fits well not only for thin-walled pipes with orthotropic layers, but also for thick-walled pipes with arbitrary layers. Besides, the influence of the layer stacking on the axial equivalent elastic modulus was studied with this method. It is found that a proper content of circumferential layer is beneficial for improving the axial equivalent elastic modulus of the laminated FRP pipe with oblique layers, and then can reduce its material quantity under the premise that its axial stiffness remains unchanged. Finally, the meso-mechanical mechanism of this effect was analyzed. The improving effect of circumferential layer on the axial equivalent elastic modulus of the laminated FRP pipe with oblique layers is mainly because that, the circumferential fibers can restrain the rigid body rotations of the oblique fibers, which tend to cause the significant deformations of the pipe wall units and the relatively low axial equivalent elastic modulus of the pipe.

• Computers and Concrete
• /
• 제27권2호
• /
• pp.163-173
• /
• 2021

In this paper, the parameters of haunch height, reinforcement ratio and site condition were evaluated for the influence on the seismic performance of a composite precast fabricated utility tunnel by shaking table test and numerical simulation. The dynamic response laws of acceleration, interlayer displacement and steel strain under unidirectional horizontal seismic excitation were analyzed through four specimens with a similarity ratio of 1:6 in the test. And a numerical model was established and analyzed by the finite element software ABAQUS based on the structure of utility tunnel. The results indicated that composite precast fabricated utility tunnel with the good anti-seismic performance. In a certain range, increasing the height of haunch or the ratio of reinforcement could reduce the influence of seismic wave on the utility tunnel structure, which was beneficial to the structure earthquake resistance. The clay field containing the interlayer of liquefied sandy soil has a certain damping effect on the structure of the utility tunnel, and the displacement response could be reduced by 14.1%. Under the excitation of strong earthquake, the reinforcement strain at the side wall upper end and haunches of the utility tunnel was the biggest, which is the key part of the structure. The experimental results were in good agreement with the fitting results, and the results could provide a reference value for the anti-seismic design and application of composite precast fabricated utility tunnel.