• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.3
• /
• pp.103-113
• /
• 2013

Shock wave model describes the propagation speed of kinematic waves in traffic flow. It was first presented by Lighthill and Whitham and has been deployed to solve many traffic problems. A recent paper pointed out that there are some traffic situations in which shock waves are not observable in the field, whereas the model predicts the existence of waves. The paper attempted to identify how such a counterintuitive conclusion results from the L-W model, and resolved the problem by deriving a new asymptotical shock wave model. Although the asymptotical model successfully eliminated the paradox of the L-W model, the validation of the new model is confined within the realm of the deceleration flow situation since the model was derived under such constraint. The purpose of this paper is to derive the remaining counter asymptotical shock wave model for acceleration traffic flow. For this, the vehicle trajectories in a time-space diagram modified to accommodate the continuously increased speed at every instant in such a way that the relationship between the spacing from the preceding vehicle and the speed of the following vehicle strictly follows Greenshield's model. To verify the validity of the suggested model, it was initially implemented to a constant flow where no shock wave exists, and the results showed that there exists no imaginary shock wave in a homogeneous flow. Numerical applications of the new model showed that the shock wave speeds of the asymptotical model for the acceleration flow tend to lean far toward the forward direction consistently. This means that the asymptotical models performs in a systematically different way for acceleration and for declaration flows. Since the output difference among the models is so distinct and systematic, further study on identifying which model is more applicable to an empirical site is recommended.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.1
• /
• pp.72-79
• /
• 2014

Cleft lip and palate(CLP) is one of the most common craniofacial deformities that requires systemic management involving a multidisciplinary team approach. Although there has been great improvement in the field of cleft surgery, surgical approach alone cannot resolve the various problems in treating cleft lip and palate. Hence the need for presurgical treatment was appreciated and especially, the concept of presurgical nasoalveolar molding was applied to treat unilateral and bilateral cleft lip and palate patients. Presurgical nasoalveolar molding(PNAM) of unilateral cleft mainly aims to recover nasal symmetry while the objectives of pre-surgical nasoalveolar molding in the bilateral cleft are to elongate the columella, to erect the tip of nose, and to reposition the forward displaced premaxillary region. This report covers the case of fraternal twins diagnosed with bilateral cleft. Retraction of the premaxillary region and nasoalveolar molding were conducted for 70 days until cheiloplasty, using elastic bands and nasoalveolar molding appliances. After cheiloplasty, there had been improvements in the length of columella and the position of forward-displaced premaxilla for both patients compared to their initial states. The esthetics was also satisfactory for both the surgery and the parents. In order to maximize the efficacy of the appliance, three components should be in balance; patients' adaptation to the appliance, parents' cooperation and proper selection and careful adjustment of the appliance by the dentist.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.37-47
• /
• 2016

The practical constraints on the commercial FPGAs which contain dedicated wide function multiplexers in their slice structure are incorporated with one of the most advanced FPGA mapping algorithms based on the AIG (And-Inverter Graph), one of the best logic representations in academia. As the first step of the mapping process, cuts are enumerated as intermediate structures. And then, the cuts which can be mapped to the multiplexers are recognized. Without any increased complexity, the delay and area of multiplexers as well as LUTs are calculated after checking the requirements for the tree construction such as symmetry and depth limit against dynamically changing mapping of neighboring nodes. Besides, the root positions of multiplexer trees are identified from the RTL code, and annotated to the AIG as AOs (Auxiliary Outputs). A new AIG embedding the multiplexer tree structures which are intentionally synthesized by Shannon expansion at the AOs, is overlapped with the optimized AIG. The lossless synthesis technique which employs FRAIG (Functionally Reduced AIG) is applied to this approach. The proposed approach and techniques are validated by implementing and applying them to two RISC processor examples, which yielded 13~30% area reduction, and up to 32% delay reduction. The research will be extended to take into account the constraints on the dedicated hardware for carry chains.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.3
• /
• pp.130-138
• /
• 2014

This study aimed to grasp Feng Shui Geographical Thought appears in layout, Axial symmetry, hierarchical planning, spatial composition and hidden design techniques of Chinese Garden, that is "Xue effect", "Long-Sha effect" and "Shuikou effect", and to study on expression in Landscape Space. The Author selected the Chinese courtyard and the Nets Garden as the object to prove the Layout landscaping techniques; and selected Beijing in Ming and Qing Dynasties and the Forbidden City, A square design in Xuanwei as the object to prove the Axial Symmetrical and Hierarchical landscaping techniques, and also selected the Lingering G-arden and the Gentle Waves Pavilion, Humble Administrator's Garden in Suzhou, and Nanhu Park in Taian as the object to prove the Spatial Composition and Hidden design techniques. The methods of this article is combined Literature survey and Field survey with Case analysis to draw the conclusions as follows: First, "Xue effect" of Chinese Feng Shui Geographical Thought is suitable for the layout of Chinese courtyard and the Nets Garden in Suzhou; Second, "Long-Sha effect" is suitable for the urban planning of Beijing in Ming and Qing Dynasty, and the layout of the Forbidden City, by the city square design in Xuanwei, we can see that it is also suitable for Chinese modern landscape design; Third, "Shuikou effect" is appeared in the Spatial Composition and Hidden design techniques. All of these landscape design techniques are commonly used in China's modern landscape. It has been proved by the analysis of the Lingering Garden and the Gentle Waves Pavilion, Humble Administrator's Garden in Suzhou, and Nanhu Park in Taian.

• Journal of the Korean Society of Radiology
• /
• v.9 no.3
• /
• pp.169-174
• /
• 2015

$LiGd_9(SiO_4)_6O_2:Ce^{3+}$ phosphors were synthesized by solid-state reaction method. The structural characteristic was investigated by X-ray powder diffraction analysis. The emission and excitation spectra of the $Ce^{3+}$ ions doped $LiGd_9(SiO_4)_6O_2$ phosphors were obtained under the UV excitation. The emission spectra of $LiGd_9(SiO_4)_6O_2:Ce^{3+}$ shows the band at 410 nm corresponding to the $^2F_{5/2}$ and $^2F_{7/2}$ states of $Ce^{3+}$. The red shift of $Ce^{3+}$ emission is found as the $Ce^{3+}$ concentration increases, which could be explained by the change in crystal-field symmetry and strength with increasing $Ce^{3+}$ concentration. Fluorescence decay time of $Ce^{3+}$ was about 20 ns. When the concentration of $Ce^{3+}$ increases life time was slightly reduced.

• Journal of the Korean Magnetics Society
• /
• v.11 no.1
• /
• pp.21-25
• /
• 2001

$\alpha$-Fe$_2$O$_3$ thin films were prepared on Si substrate by a pulsed laser deposition system and characterized by X-ray and Mossbauer spectroscopy. The appropriate conditions of pulsation was the power of 5.128 W/cm2 at on oxygen pressure of 0.1 Torr at a substrate temperature of 30$0^{\circ}C$. After that the film was heated at 80$0^{\circ}C$ for 1 day. The particles shape deposited on the film was ellipsoidal and the average length and width were 200~300 nm, 70~150 am respectively. The crystal structure was conformed to be of corundums symmetry with the hexagonal unit cell having a lattice constant of u = 5.03$\pm$0.05 $\AA$, c = 13.735$\pm$0.05 $\AA$. The average angles between the atomic spin and the magnetic hyperfine field of Fe ion were 38$^{\circ}$and 48$^{\circ}$ at above and blow the Morin transition temperature respectively. The Morin transition was found to occur at the temperature ranges from 200 K to room temperature and atomic spin direction was assumed to change from 48$^{\circ}$ to 80$^{\circ}$in respect to the c-axis.

• Korean Journal of Materials Research
• /
• v.25 no.8
• /
• pp.423-428
• /
• 2015

Impedancemetric $NO_x$ (NO and $NO_2$) gas sensors were designed with a stacked-layer structure and fabricated using $LaCr_xCo_{1-x}O_3$ (x = 0, 0.2, 0.5, 0.8 and 1) as the receptor material and $Li_{1.3}Al_{0.3}Ti_{1.7}(PO_4)_3$ plates as the solid-electrolyte transducer material. The $LaCr_xCo_{1-x}O_3$ layers were prepared with a polymeric precursor method that used ethylene glycol as the solvent, acetyl acetone as the chelating agent, and polyvinylpyrrolidone as the polymer additive. The effects of the Co concentration on the structural, morphological, and $NO_x$ sensing properties of the $LaCr_xCo_{1-x}O_3$ powders were investigated with powder X-ray diffraction, field emission scanning electron microscopy, and its response to 20~250 ppm of $NO_x$ at $400^{\circ}C$ (for 1 kHz and 0.5 V), respectively. When the as-prepared precursors were calcined at $700^{\circ}C$, only a single phase was detected, which corresponded to a perovskite-type structure. The XRD results showed that as the Co concentration of the $LaCr_xCo_{1-x}O_3$powders increased, the crystal structure was transformed from an orthorhombic phase to a rhombohedral phase. Moreover, the $LaCr_xCo_{1-x}O_3$ powders with $0{\leq}x<0.8$ had a rhombohedral symmetry. The size of the particles in the $LaCr_xCo_{1-x}O_3$powders increased from 0.1 to $0.5{\mu}m$ as the Co concentration increased. The sensing performance of the stack-structured $LaCr_xCo_{1-x}O_3/Li_{1.3}Al_{0.3}Ti_{1.7}(PO_4)_3$ sensors was found to divide the impedance component between the resistance and capacitance. The response of these sensors to NO gas was more sensitive than that to $NO_2$ gas. Compared to other impedancemetric sensors, the $LaCr_{0.8}Co_{0.2}O_3/Li_{1.3}Al_{0.3}Ti_{1.7}(PO_4)_3$ sensor exhibited good reversibility and reliable sensingresponse properties for $NO_x$ gases.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.4
• /
• pp.33-50
• /
• 2013

The purpose of this study was to seek the spatial organization and prototype landscape through literature reviews, historical evidences, and field surveys for Donggwanwangmyo(東關王廟) shrine in Seoul. The results were as follows : First, the basic layout of the main buildings in Donggwanwangmyo which is the remains influenced by China had bilateral symmetry on the central axis between the north and south. Second, the Chinese forms and features were found at Jeong-jeon and middle gate in Donggwanwangmyo, and the symbolic elements of royal authority was also found in each space of Donggwanwangmyo. Third, spatial organization was classified as the entrance and the ritual area, and the entrance area was maintained by administrators and was used as the place of ritual ceremony preparation. Fourth, the original form of Donggwanwangmyo had been damaged due to the project for making urban park in the 1970s. The most of the existing trees and shrubs which are not suitable to the shrine should be removed to recover the original landscape of Donggwanwangmyo and chui-byoung(翠屛), pond, landscape facilities also needed to be restored. Fifth, Donggwanwangmyo needed to reorganize the pious atmosphere to recover of the shrine environment, and needed to be reclassified as historical site. Finally, some criticizes that Donggwanwangmyo is the result of Toadyism, but Donggwanwangmyo can be used as the valuable tourism resource through the awareness that Donggwanwangmyo was built under the situation of Joseon Dynasty, and organization and understanding that Donggwanwangmyo is a symbolic remains for the exchange between Korea and China.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.5-34
• /
• 2022

The purpose of this study is to investigate the unique contrasting landscape characteristics of imperial tombs of Qing dynasty by examining the characteristics of facility layout in which location, Feng shui, and siblings are harmonized with the 12 Qing Dynasty Hwanggyeongchim. Through literature surveys, field observation and interviews, videos and drawing comparison, and inductive contrast analysis, the contrasting landscape characteristics of imperial tombs in the Qing Dynasty were analyzed by classifying them into natural environment, location, Feng shui, and formal esthetics. As a result, the characteristics of the location type and the layout plan of the Qing dynasty imperial tombs were derived from the analysis of Feng shui shape, axis extension distance along the midaxial line, the width of the ridge, the formality of the facility layout according to the difference between the height of the starting point and the end point, the leftward direction of the tomb, and the space ratio of the 'entry space' - 'ritual space' - 'burial mound space', etc. In addition, it was possible to derive the facility arrangement characteristics of tombstones through the analysis of the types and the arrangement order of tombs facilities, as well as the distribution, quantity and types of stone figures, while also revealing some contrasting characteristics different from those of the Ming Dynasty. In addition, it was confirmed that the spatial division effect through the water system and the view effect of the view from the midaxial line and the vista are the representative view effect found in the Qing Dynasty imperial tombs along with the density contrast.

• Journal of Broadcast Engineering
• /
• v.28 no.1
• /
• pp.79-89
• /
• 2023

A multi-view display is regarded as the most practical technology to provide a three-dimensional effect to a viewer because it can provide an appropriate viewpoint according to the observer's position. But, most multi-view displays with flat shapes have a disadvantage in that a viewer watches 3D images only within a limited front viewing angle. In this paper, we proposed a spherical display using a ball lens with spherical symmetry that provides perfect parallax by extending the viewing zone to 360 degrees. In the proposed system, each projection lens is designed to be packaged into a small modular array, and the module array is arranged in a spherical shape around a ball lens to provide vertical and horizontal parallax. Through the applied optical module, the image is formed in the center of the ball lens, and 3D contents are clearly imaged with the size of about 0.65 times the diameter of the ball lens when the viewer watches them within the viewing window. Therefore, the feasibility of a 360-degree full parallax display that overcomes the spherical aberration of a ball lens and provides a wide field of view is confirmed experimentally.