• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.3
• /
• pp.8-18
• /
• 1998

This study was to make a effective seed mixture types with Korean native plants by researching te seed timing of suitable woody plants and competitive germination results of various plants for the purpose of cut-slotes revegetation. The results are summarized as follows. 1. In field polystand experiment, comparative among severalcomposition combination for early coverage shows good condition. 2. In combination for early-coverage, mixture of native woody plants only seeded in May and June shows over 90% coverage. It was not inferior to the other mixture types. So mixture of Albizzia Julibrissin, Cymbopogon doeringii, Alnus hirsuta and Indigfera pseudo-tinctoria is able to use to mixture type. 3.In case of combination for scenic beauty, Rhus chinensis shows low germination in the mixture for scenic beauty. But 90 days after seeded in May, it recorded maximum 44 cm height, seeded in June recorede 18 cm height. 4. Lespedeza crytobotrya shows good elongation in the combination for early coverage and scenic beauty, but that effects on elongation of other plants. So, it demands close investigation about suitable mixing rate of plants. 5. Alnus hirsuta, Pinus thunbergii, Betula platyphylla, Spiraea prunifolia var. simpliciflora have been rarely germinated. So, the mixture of these plants wasn't adequate to use for revegatation.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1409-1411
• /
• 2003

The application of simulated KOMPSAT-2 imagery to monitor graveyards is to be developed. Positions calculated from image were compared with those obtained from Geographic Positioning System. With 24 checkpoints, the position of graveyards showed within 5-meter range. Unsupervised classification, supervised classification, and objected-orientation classification algorithms were used to extract the graveyard. Unsupervised classification with masking processes based on National topographic data gives the best result. The graveyards were categorized with four types in field studies while the two types of graveyards were shown in descriptive statistics. Cluster Analysis and discriminant analysis showed the consistency with two types of tombs. It was hard to get a specific spectral signature of graveyards, as they are covered with grasses at different levels and shaded from the surrounding trees. The slopes and aspects of location of graveyards did not make any difference in the spectral signatures. This study gives the basic spectral characteristics for further development of objected-oriented classification algorithms and plausibility of KOMPSAT-2 images for management of mountainous areas in the aspect of position accuracy and classification accuracy.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.2 no.3
• /
• pp.166-169
• /
• 2021

The purpose of this study was to identify the natural habitat of Bulbophyllum inconspicuum Maxim. in Hongdo, Jeonnam Province, South Korea. A field investi gation was conducted between May 2019 and May 2021. The growth of B. inconspicuum species was confirmed in three known regions based on National Survey on the Distribution of Endangered Species. Additionally, in the area investigated, 37 new regions harboring B. inconspicuum were detected. The newly observed B. inconspicuum grew naturally on Quercus mongolica, Rhaphiolepis indica var. umbellata, Carpinus turczaninowii, and rocks. Most of them were found on southeast and southwest slopes with altitude above 250 m. As few as 10 up to hundreds of B. inconspicuum were found in clusters. Close to their habitat, Calanthe sieboldii Decne. ex Regel, C. aristulifera Rchb. f. and C. × kibanakirishima Maek. were also found. As Hongdo is an island, multiple endangered species were found together. Thus, once the habitat of a certain plant is discovered, it is very likely that illegal collection of several other species will also occur. Proactive internal and external measures are needed to preserve these species.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.1
• /
• pp.23-29
• /
• 2022

As the application field of radar is expanded and the bandwidth increases, the number of radar sensors operating at the same frequency is continuously increasing. In this paper, we propose a method of analyzing interference when two pulse doppler radars are operated at the same frequency with different waveform which are designed independently. In addition, we show that even for a previously designed LFM waveforms, the interference can be suppressed without affecting the performance by changing the sign of the frequency slope by increasing/decreasing, or by modulating the pulses by the different codes. The interference suppression by different slopes is more effective for similar waveform and the suppression by the codes increases as the number of pulses increases. We expect this result can be extended to the cases where multiple radars are operated at the same frequency.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.12
• /
• pp.19-29
• /
• 2023

The main problem with roads is that cracks and settlement occur over time due to loads acting from the surface layer. One way to solve this problem is to use Geocell. Geocell can be used for structural reinforcement for erosion prevention, ground stabilization on flat and steep slopes, load bearing, and ground preservation. In this study, analyzed road pavement application cases using Geocell and purpose of this study is to analyze the bearing capacity of a road paving method including Geocell using field tests and LFWD(Light Falling Weight Deflectometer) equipment. In addition, the bearing capacity was compared and analyzed with the existing traditional road pavement method.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.2
• /
• pp.107-119
• /
• 2018

The slope monitoring systems which have been operating at home and abroad were investigated and then the real-time monitoring management system for evacuating inhabitants based on Web-EOC(Emergency Operating Center) was constructed. We tried to analyze realistically and precisely the situation by changing from the existing field-centered management to sensor-centered management that measures coordinates and provides in real-time data of measuring/monitoring sensors installed at a field site and developing related viewer programs. In addition, the 3D based monitoring management system, which has alarm functions in case of emergency and provides information about the evacuation place, was constructed on the base that is able to expand to nationwide fields by using Vworld 3D map. Ten steep slope monitoring sites were registered on Web-EOC slope monitoring management system constructed in the research and then application instances were suggested.

• New & Renewable Energy
• /
• v.16 no.3
• /
• pp.35-41
• /
• 2020

In this study, a floating LiDAR system (FLS) is investigated through a field test involving two steps. First, correlations among wind speeds, measured using the met mast and two LiDARs, are computed to analyze the acceptance criteria of LiDAR for measuring wind speed. The results of the analysis show that the slopes of single variant regression between mean wind speeds are below 1.03 and the coefficient of determination is above 0.97. Next, correlations among wind speeds measured using the FLS and a fixed LiDAR are determined through a field test carried out in Doomi-doo, Tong-young, Gyeongsangnam-do. The FLS is installed 300 m away from the fixed LiDAR on the ground. The results show that the slope of single variant regression is approximately 1.0275 and the coefficient of determination is above 0.971. According to the IEA/wind 18 recommendation, it is found that the developed FLS measures valid wind speeds to assess wind resources for the development of offshore wind farms.

• Tunnel and Underground Space
• /
• v.25 no.5
• /
• pp.408-416
• /
• 2015

The collapse of the underground cavities and voids, which were made for developing mineral resources, can cause the subsidence of the ground surface in the residential areas. During the Japanese colonial era and the 1960's mining boom period, lots of mines had been developed indiscriminately in Korea. Due to complicated geological conditions and mining methods, many of dangerous underground mine cavities with steep slopes had been generated at the shallow surface. Due to such conditions, it is difficult to directly apply valid foreign reclamation practice for the cavities in Korea environments. It is necessary to develop the efficient ground stabilization technologies for the Korea underground mine conditions to solve abandoned mine reclamation properly. Therefore, MIRECO and Korea government have been carrying out practical researches and technical developments together with other academic researchers and reclamation business partners, and various practical solutions such as surveying and exploration methods, proper cavity filling materials and reinforcement methods have been developed with application in the mine field. In this article, up to date technologies and R&D trends in the field of mine subsidence prevention technology are broadly reviewed to establish the future direction of a research and development.

• Tunnel and Underground Space
• /
• v.10 no.4
• /
• pp.506-515
• /
• 2000

A lot of underground construction projects have been conducted by economical, social and military purposes in Korea for the last three decades. As a result, magnificent amount of data were obtained from geological site investigations, laboratory and field tests, design and field monitoring. But up to now, these valuable informations were neither systematically stored nor utilized efficiently resulting in a great loss of time and money. In this study, a database system named GeoINFO was developed using Microsoft Access 97 for management of informations which can be obtained from underground construction. The developed database system is especially designed to cover three major types of underground facilities-tunnels, underground storages and rock slopes and has multi-layered tree structures for data input. The system also has a unique indexing system for efficient data search using Visual Basic code.

• The Journal of Engineering Geology
• /
• v.17 no.1 s.50
• /
• pp.89-99
• /
• 2007

This paper intends to introduce more objective and qualitative rock mass classification method easily applicable to the excavation of gneissic masses showing corestone weathering profiles. It is proven that corestone weathering profile could be divided with reasonable accuracy into digging, ripping and blasting layers using visual and simple mechanical techniques such as Schmidt hammer rebound test on cut slopes, taking into consideration strength and spacial distribution of corestone, workability and work efficiency of excavation. Also, seismic refraction surveys were employed for shallow investigations (down to $20{\sim}30m$ depth) in corestone weathering profile and conducted across the top of vertical exposures where the underlying geology could be directly inspected. Some discrepancies ($3{\sim}4m$ in average and 6 m occasionally) between the actual and assumed materials with respect to seismic velocities were observed. Thus it can be concluded that field geotechnical mapping and field seismic test should be used together in order to get a relatively good accuracy in assessing likely excavation conditions of corestone weather-ing profiles.