DOI QR코드

DOI QR Code

Validation of Floating LiDAR System for Development of Offshore Wind Farms

해상풍력단지 개발을 위한 부유식 라이다 검증

  • Received : 2020.06.25
  • Accepted : 2020.08.26
  • Published : 2020.09.25

Abstract

In this study, a floating LiDAR system (FLS) is investigated through a field test involving two steps. First, correlations among wind speeds, measured using the met mast and two LiDARs, are computed to analyze the acceptance criteria of LiDAR for measuring wind speed. The results of the analysis show that the slopes of single variant regression between mean wind speeds are below 1.03 and the coefficient of determination is above 0.97. Next, correlations among wind speeds measured using the FLS and a fixed LiDAR are determined through a field test carried out in Doomi-doo, Tong-young, Gyeongsangnam-do. The FLS is installed 300 m away from the fixed LiDAR on the ground. The results show that the slope of single variant regression is approximately 1.0275 and the coefficient of determination is above 0.971. According to the IEA/wind 18 recommendation, it is found that the developed FLS measures valid wind speeds to assess wind resources for the development of offshore wind farms.

Keywords

References

  1. Korean Standards Association, 2013, "KS C IEC 61400-3, Wind turbines - Part 3: Design requirements for offshore wind turbines".
  2. International Electrotechnical Commission (IEC), 2017, "IEC 61400-12-1, Power performance measurements of electricity producing wind turbines".
  3. Smith, M., 2012, "An insight into lidars for offshore wind measurements", Presented at Deepwind 2012 Conference, Trondheim, Norway.
  4. Hsuan, C.Y., Task, Y.S., Ke, J.H., Prahmana, R.A., Chen, K.J., and Lin, T.H., 2014, "Validation and measurement of floating LiDAR for nearshore wind resource assessment application", Energy Procedia, 61, 1699-1702 https://doi.org/10.1016/j.egypro.2014.12.195
  5. International Electrotechnical Commission (IEC), 2017, "IEA wind RP18 Floating lidar systems".
  6. Carbon Trust Offshore Wind Accelerator (OWA), 2018, "Roadmap for the commercial acceptance of floating LIDAR technology", http://version2.accurasea.com/wp-content/uploads/2019/10/roadmap-carbontrust-2.0.pdf
  7. Kim, S.O., Kim, H.W., Ko, C.B., and Kyong, N.H., 2011, "2MW offshore wind turbine construction", Journal of Wind Energy, 2(2).
  8. MOTIE, 2017, Announcement No. 2017-611, "The 8th basic plan for long-term electricity supply and demand", http://www.motie.go.kr/motie/ne/announce2/bbs/bbsView.do?bbs_cd_n=6&biz_anc_yn_c=Y&bbs_seq_n=64603
  9. Kim, J., Lee, H., Cho, I.H., Kim, N.H., and Boo, S.Y., 2017, "Conceptual design of moored floating meterological buoy with LiDAR", J. Ocean Eng. Technol., 31(5), 325-334. https://doi.org/10.26748/KSOE.2017.10.31.5.325
  10. Jo, M., and Park, S., 2015, "Design of control algorithm for floating offshore wind turbines", New. Renew. Energy, 11(2), 3-11. https://doi.org/10.7849/ksnre.2015.06.11.2.3