• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.646-651
• /
• 2002

The flow field around a symmetrical airfoil in a uniform flow under the generation of noise was studied by experiments and numerical simulation. The experiments are conducted by visualizing the surface flow over the airfoil with a shear-sensitive liquid-crystal coating and by measuring the instantaneous velocity field around the trailing edge of the airfoil. The results indicate that the discrete frequency noise is generated when the separated laminar flow reattaches near the trailing edge of the pressure side and the turbulent boundary layer is formed over the suction side of the airfoil near the trailing edge. The periodic behavior of vortex formation was observed around the trailing edge and it persists further downstream in the wake. The frequency of the vortex formation in the wake was consistent with that of the discrete frequency noise.

• International Journal of Automotive Technology
• /
• v.5 no.2
• /
• pp.115-122
• /
• 2004

Evaluation of active safety control systems usually relies heavily on field testing and is time-consuming and costly. Advances in computer simulations make it possible to perform exhaustive design trials and evaluations before field testing, and promise to dramatically reduce development cost and cycle time. In this paper, a comprehensive simulation-based evaluation procedure is proposed, which combines standard evaluation maneuvers, worst-case techniques, and a driver model for closed-loop path following evaluations. A vehicle dynamic controller (VDC) for a popular Sport Utility Vehicle is evaluated using the proposed procedure. Simulation results show that the proposed procedure can be used to assess the performance of the VDC under various conditions and provides valuable information for the re-design of the VDC.

• Computers and Concrete
• /
• v.15 no.5
• /
• pp.847-864
• /
• 2015

In this paper, a reaction-diffusion model of carbonation process in self-compacting concrete (SCC) was realized with a consideration of multi-field couplings. Various effects from environmental conditions, e.g. ambient temperature, relative humidity, carbonation reaction, were incorporated into a numerical simulation proposed by ANSYS. In addition, the carbonation process of SCC was experimentally investigated and compared with a conventionally vibrated concrete (CVC). It is found that SCC has a higher carbonation resistance than CVC with a comparable compressive strength. The numerical solution analysis agrees well with the test results, indicating that the proposed model is appropriate to calculate and predict the carbonation process in SCC. The parameters sensitivity analysis also shows that the carbon dioxide diffusion coefficient and moisture field are essentially crucial to the carbonation process in SCC.

• The Korean Journal of Ecology
• /
• v.19 no.6
• /
• pp.499-506
• /
• 1996

Forest stand development in Kwangnung Experimental Forest, Korea, was simulated with a forest succession gap model of the JABOWA/FORET type, in order to predict climax species and characterime the trend of community structure along the succession. The model runs for a period or 1, 000 yr and is based on the averaged successional characteristics of 50 forest plote with an individual size or 1/12 ha gap consisted of the 15 major tree species. The total bimass and leafarea index have arrived at a steady state since about 200 yr and these values are smaller than that or field survey. Carpinus cordata, C. laxiflora, Quercus mongolica and Q. serrata were epected to be climax species that represent about 86% or total biomass in later stage and these results coincided with the previous succession studies from field survey in the area.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.1
• /
• pp.93-101
• /
• 2008

It is difficult for a MWR(Missile Warning Radar) to perform a threat decision accurately since there is no tracking part which gives more accurate threat information to the MWR. In this paper, the threat decision algorithm is proposed using an azimuth angular rate to improve the accuracy. The azimuth angular rate is dependent upon the direction of an approaching target. The target is classified into a threat or non-threat using a boundary condition of the azimuth angular rate. The boundary condition is determined using the Monte-Carlo simulation. The performance of the proposed algorithm is evaluated using this condition at field tests of MWR. The efficiency of the proposed method for the threat decision is proved by comparing the results of field tests with the simulation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.132.6-132
• /
• 2001

This paper aims to derive a mathematical model of the dynamics of handling tasks in field robot which stable grasping and manipulates a rigid object with some dexterity. Firstly, a set of differential equation describing dynamics of the manipulators and object together with geometric constraint of tight area-contacts is formulated by Lagrange equation. Secondly, problems of controlling both the internal force and the rotation angle of the grasped object under the constraints of area-contacts of tight area-contacts are discussed. The effect of geometric constraints of area-contacts on motion of the overall system is analyzed and a method of computer simulation for overall system of differential-algebraic equations is presented. Thirdly, simulation results are shown and the effects of geometric constraints of area-contact is discussed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.173-179
• /
• 1996

A computer simulation has been performed for the application to the elastoplastic stress analysis in a discontinuous composite solid. To obtain the internal field quantities of composite the micromechanics analysis and finite element analysis (FEA) were implemented. As the procedure the reasonably optimized FE mesh generations the appropriate imposition of boundary condition and the relevant postprocessing such as elastoplastic thermomechanical analysis were taken into account. For the numerical illustration an aligned axisymmetric single fiber model has been employed to assess field quantities. It was found that the proposed simulation methodology for stress analysis is applicable to the complicated inhomogeneous solid for the investigation of micromechanical behavior.

• Journal of the Korea Society for Simulation
• /
• v.17 no.2
• /
• pp.13-19
• /
• 2008

New Buffered deposition is proposed to decrease junction electric field in this paper. Buffered deposition process is fabricated after first gate etch, followed NM1 ion implantation and deposition & etch nitride layer. New Buffered deposition structure has buffer layer to decrease electric field. Also we compared the hot carrier characteristics of Buffered deposition and conventional. Also, we design a test pattern including NMOSFET, PMOSFET, LvtNMOS, High pressure N/PMOSFET, so that we can evaluate DC/AC hot carrier degradation on-chip. As a result, we obtained 10 years hot carrier life time satisfaction.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.3
• /
• pp.775-780
• /
• 2016

This induced voltage measurement test and electromagnetic field simulation are related to the possibility of control signal malfunction by power line. Through an experiment, this research analyzed whether the voltage causing control malfunction according to the on/off status of power permitted to power line was induced to control signal line. Also, the research calculated the voltage induced to control signal line and examined the phenomenon by conducting an electro-magnetic field-specific simulation through the finite element method for the cable model used in the experiment.

• Computers and Concrete
• /
• v.12 no.4
• /
• pp.431-442
• /
• 2013

This study attempted to find a proper method applicable to simulating practical equifield lines of two-dimensional Accelerate Lithium Migration Technique (ALMT), and evaluate the feasibility of using the theoretical ion migration model of one-dimensional ALMT to predict the ion migration behavior of two-dimensional ALMT. The result showed that the electrolyte or carbon plate can be used as matrix to draw equifield line graph similar to that by using mortar as matrix. Using electrolyte electrode module for simulation has advantages of simple production, easy measurement, rapidness, and economy. The electrolyte module can be used to simulate the equifield line distribution diagram in practical two-dimensional electrode configuration firstly. Then, several equifield line zones were marked, and several subzones under one-dimensional ALMT were separated from various equifield line zones. The theoretical free content distribution of alkali in concrete under two-dimensional electric field effect could be obtained from duration analysis.