Browse > Article

EVALUATION OF VEHICLE DYNAMIC CONTROL FOR ROLOVER PREVENTION  

Ungoren, A.Y. (Department of Mechanical Engineering, University of Michigan)
Peng, H. (Department of Mechanical Engineering, University of Michigan)
Publication Information
International Journal of Automotive Technology / v.5, no.2, 2004 , pp. 115-122 More about this Journal
Abstract
Evaluation of active safety control systems usually relies heavily on field testing and is time-consuming and costly. Advances in computer simulations make it possible to perform exhaustive design trials and evaluations before field testing, and promise to dramatically reduce development cost and cycle time. In this paper, a comprehensive simulation-based evaluation procedure is proposed, which combines standard evaluation maneuvers, worst-case techniques, and a driver model for closed-loop path following evaluations. A vehicle dynamic controller (VDC) for a popular Sport Utility Vehicle is evaluated using the proposed procedure. Simulation results show that the proposed procedure can be used to assess the performance of the VDC under various conditions and provides valuable information for the re-design of the VDC.
Keywords
VDC; Rollover; Stability control; Active safety;
Citations & Related Records

Times Cited By Web Of Science : 14  (Related Records In Web of Science)
연도 인용수 순위
  • Reference
1 Zanten, A. V., Erhardt, R. and Pfaff, G. (1995). VDC, The vehicle dynamics control system of bosch. SAE Paper No. 950759, SAE Congress and Exposition
2 Chen, B. and Peng, H. (2001). Differential-braking-based rollover prevention for sport utility vehicles with human-in-the-loop evaluations. VehicIe System Dynamics 36, 4-5, 359-389   DOI   ScienceOn
3 Ungoren, A.Y., Peng, H. and Milot, D. (2001). Rollover propensity evaluation of an SUV equipped with a TRW VSC System. SAE Paper No. 2001-01-0128, SAE Congress and Exposition
4 Ungoren, A. Y. and Peng, H. (2004). An adaptive lateral preview driver model. to appear in Vehicle System Dynamics
5 Matsumoto, S., Yamaguchi, H., Inoue, H. and Yasuno, Y. (1992). Improvement of vehicle dynamics through braking force distribution control. SAE Paper No. 920645, SAE Congress and Exposition
6 CARSIM User Manual (2003). http://www.carsim.com/
7 Toyota (2001). Comments on part 575 consumer information regulations. Rollover resistance-Dynamic rollover testing. Docket No. NHTSA-2001-9663
8 Garrick, J. F., Garrott, W. K., and O'Harra, B. C. (2002). A comprehensive experimental examination of test maneuvers that may induce on-road. Untripped, Light Vehicle Rollover-Phase IV of NHTSA's Light Vehicle Rollover Research Program, DOT HS 809 513
9 Luus, R. (2000). Iterative Dynamic Programming. Chapman & Hall/Crc. Monographs and Surveys in Pure and Applied Mathematics
10 National Highway Traffic Safety Administration. (1973). Advance Notice of Proposed Rulemaking (ANPRM) on Resistance to Rollover, NHTSA 38 FR 959
11 Hac, A. (2002). Influence of active chassis systems on vehicle propensity to maneuver-induced rollovers. SAE Paper No. 2002-01-0967. SAE Congress and Exposition.
12 National Highway Traffic Safety Administration. (1998). Traffic Safety Facts 1997
13 Pierre, D. A. (1986). Optimization Theory with Applications. Dover Publications. New York
14 Ungoren, A.Y., Peng, H. and Milot, D. (2001). Rollover propensity evaluation of an SUV equipped with a TRW VSC System. SAE Paper No. 2001-01-0128, SAE Congress and Exposition
15 National Highway Traffic Safety Administration. (2002). Traffic Safety Facts 2001