• Progress in Superconductivity and Cryogenics
• /
• v.21 no.2
• /
• pp.45-49
• /
• 2019

This paper reports comparison between analytic and numerical simulation approaches for calculation of screening current and screening current induced field in a high temperature superconductor magnet. Bean slab model is adopted to calculate screening current and SCF analytically, while the finite element method numerically. A case study of screening current and SCF calculation are conducted with a magnet, a 7 T 68 mm cold-bore multi-width no-insulation GdBCO magnet built and tested by Massachusetts Institute of Technology Francis Bitter Magnet Laboratory. In this study, we assume the magnet is dunked in liquid nitrogen at 77 K. Furthermore, the simulation results are compared in terms of computation time and accuracy. Finally, discussion on the different methods together with the comparison between the calculations and experiment is provided.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.11a
• /
• pp.26-29
• /
• 2022

The diffuse sound field plays a crucial role in the perceptual quality of the auralization of virtual scenes. Diffuse Rain is a geometrical scattering model which enables the simulation of diffuse fields that is compatible with acoustic ray tracing, but is often computationally expensive. We develop a novel method that can reduce this cost by rendering the large number of Diffuse Rain data in Ambisonics format. The proposed method is evaluated in a shoebox scene simulation run on MATLAB, in reference to a more faithful method of rendering the Diffuse Rain data ray-by-ray. The EDC and IACC of the binaural output show that the simulated diffuse field can be rendered in Ambisonics with only minimal deviations in energy decay and spatial quality, even with 1^st-order Ambisonics.

• Journal of the Korean Vacuum Society
• /
• v.5 no.4
• /
• pp.278-283
• /
• 1996

We constructed a single path cylindrical mirror analyser(CMA) using field terminator methods. With computer simulation, the best fit voltage ratio and position of the field terminaor was determined with maintain log-scale equipotential line near both end of the CMA. Then we construct field terminator with voltage divider of metal-oxide resisters which reduces the fringe field effect. The resolving power of the CMA was better than $\Delta$E/E=0.4%.

• International Journal of Automotive Technology
• /
• v.6 no.4
• /
• pp.351-357
• /
• 2005

Development of a real-time simulation model for high-speed and multibody tracked vehicles is difficult because they involve hundreds of highly nonlinear equations. In the development of a reliable tracked vehicle model for real-time simulation, it is helpful to use an off-line tracked vehicle model developed by considering all the degrees of freedom of each element. This paper presents a step-by-step procedure for the development of a real-time simulation model based on the off-line tracked vehicle model. The road input data, Profile IV, is used for the real time simulation and simulation results are compared with vehicle test results obtained in the military test field. It is noted that the simulation results are quite close to the test results.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.04a
• /
• pp.94-99
• /
• 1999

In this Paper, the estimation method of painting process in the automobile plant using computer simulation techniques is studied to improve the bottle neck process, the weak point and the productivity. For model and analysis, Promodel is used which is a manufacturing oriented simulation software developed by Promodel corporation in the U.S.A. Firstly the result of the simulation shows that we can obtain capability improvement in the system performance using computer simulation. Secondly, the optimum system specification is decided by comparing reports generated by scenario in simulation program find out the suitable conditions. Finally, the speed of conveyor and a pitch of painting body as the most critical parameters are chosen on the basis of exhaustive field evaluation to study their effects o the capacity of the process. The best alternative condition for the maximum capacity of the process is selected by computer simulation.

• Journal of the Korea Computer Graphics Society
• /
• v.21 no.5
• /
• pp.21-27
• /
• 2015

In this paper, we presents visual effect(water, fire, smoke) simulation and interaction system for TV virtual studio. TV virtual studio seamlessly synthesizes CG background and a live performer standing on a TV green studio. Previous virtual studios focus on the registration of CG background and a performer in real world. In contrast to the previous systems, we can afford to make new types of TV scenes more easily by simulating interactive visual effects according to a performer. This requires the extraction of the performer motion to be transformed 3D vector field and simulate fluids by applying the vector field to Navier Stokes equation. To add realism to water VFX simulation and interaction, we also simulate the dynamic behavior of splashing fluids on the water surface. To provide real-time recording of TV programs, real-time VFX simulation and interaction is presented through a GPU programming. Experimental results show this system can be used practically for realizing water, fire, smoke VFX simulation and the dynamic behavior simulation of fish flocks inside ocean.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.20 no.6
• /
• pp.81-87
• /
• 2018

In this paper, in order to maximize the input process efficiency of the building energy simulation field, the authors developed the automatic extraction module of spatial information based BIM geometry information. Existing research or software extracts geometry information based on object information, but it can not be used in the field of energy simulation because it is inconsistent with the geometry information of the object constituting the thermal zone of the actual building model. Especially, IFC-based geometry information extraction module is needed to link with other architectural fields from the viewpoint of reuse of building information. The study method is as follows. (1) Grasp the category and attribute information to be extracted for energy simulation and Analyze the IFC structure based on spatial information (2) Design the algorithm for extracting and reprocessing information for energy simulation from IFC file (use programming language Phython) (3) Develop the module that generates a geometry information database based on spatial information using reprocessed information (4) Verify the accuracy of the development module. In this paper, the reprocessed information can be directly used for energy simulation and it can be widely used regardless of the kind of energy simulation software because it is provided in database format. Therefore, it is expected that the energy simulation process efficiency in actual practice can be maximized.

• Journal of Korean Institute of Industrial Engineers
• /
• v.20 no.4
• /
• pp.73-84
• /
• 1994

Output analysis is one of the most important fields of simulation to achieve the accurate simulation results. This study shows how to analyze simulation output data in the steady state using Procrustes analysis technique which has not been used in the field of simulation yet. In this paper Procrustes analysis method is used to perform the analysis of simulation output efficiently and effectively by applying the improved version of the method. The experiments are conducted using M/M/1 queueing simulation model. The results obtained by Procrustes analysis method show better estimates for average waiting times and average queue lengths which are closer to true values and narrower confidence intervals than when replication-deletion method is used. Also it requires the smaller number of simulation runs.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.2
• /
• pp.112-121
• /
• 2006

To evaluate the performance of ventilation system properly, the correlations among the ventilation rate, indoor air-quality and cooling/heating load should be analysed. In this study, simulation tool to analyze the performance of ventilation system was developed. The simulation tool is based on the TRNSYS and some modules to calculate concentration of pollutants with the operation of ventilation system and to decide the signal of ventilation system were newly developed in this study. And these modules coupled with building load and heating/cooling simulation modules. To verify the validity of developed simulation tool, comparison study between simulation and field study were accomplished. As results, the simulation tool developed in this study can be used to predict the performance of ventilation system with accuracy.

• Journal of the Korea Society for Simulation
• /
• v.8 no.2
• /
• pp.73-85
• /
• 1999

In this paper, the productivity estimation of the painting line in an automobile plant is studied. To improve the bottleneck and the weak point of the process, computer simulations are performed. In determining the system specification, the status of the conveyor lines and the other physical facilities are considered in order not to intervene with each other and to satisfy the painting facility restrictions. As simulation parameters, production performance ratio, number of hanger and dolley, down time, speed of conveyor and the pitch of a painting body are chosen on the basis of exhaustive field evaluation to study their effects on the capacity of the process. The results of the simulation show that we can improve the capability of they system without additional investment to the plant facility. The best condition for the maximum capacity of the process is selected by comparing the alternative computer simulation results. As a simulation language, Promodel is used which is very useful and easy to use in manufacturing oriented simulation.