• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.306-313
• /
• 2005

For seismic response analysis of rockfill dam, dynamic material properties, by field test, are needed. Density and elastic wave profiles have to be known to get an information of the material properties of structure. In this study, various field tests are applied to the example of rockfill dam to get an information of dynamic material properties and seismic safety is evaluated by seismic response analysis with the result of field tests.

• 한국지반공학회논문집
• /
• 제23권4호
• /
• pp.133-147
• /
• 2007

지반의 전단파 속도 주상도를 도출하는데 있어 다운홀 기법은 하나의 시추공을 이용하고 간단한 지표면 가진원을 사용하므로 매우 경제적이다. 따라서 학교와 현업에서 지반조사 및 연구 목적으로 널리 사용되고 있다. 그러나 올바르지 못한 장비의 구성과 해석과정으로 인하여 결과의 신뢰성에 문제가 있어왔다. 본 연구에서는 다운홀 기법의 상호검증시험(Round Robin Test)을 통해 참여 기관에 대해서 각각의 실험 장비와 결과 해석 과정에 대해 비교함으로써 문제점에 대해 분석하였으며 이를 바탕으로 최적의 수행 시스템을 구성하였다. 효율적인 가진원을 제작하고 적절한 감지기를 도입 혹은 제작하였으며 노트북 기반의 신호 획득 시스템을 구축하였다. 신호 획득 및 관리 프로그램, 결과도출 프로그램을 통해 현장에서 효율적으로 실험을 진행하고 신뢰성 있는 최종 결과를 신속하게 도출할 수 있도록 하였다. 구성된 수행 시스템을 이용하여 현장 적용 실험을 수행하였으며 그 효율성을 확인할 수 있었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.330-337
• /
• 2002

The HANARO seismic monitoring system is classified as non-nuclear safety(NNS), seismic category I, and quality class T The seismic monitoring system installed at the instrument room consists of five field sensors and one monitoring cabinet. The field sensors are composed of three triaxial accelerometers which installed at base slab, free field and overhead crane support respectively, a seismic trigger and a seismic switch at base slab. The most parts of analog system except field sensors are not produced any more, the improvement of the system is to be needed. The analog system with magnetic tape recorder is not only out-of-date model but dependent upon foreign technology. So it is difficult to get the spare parts and the cost to buy them is increased. Therefore we have improved the analog seismic monitoring system into a new digital seismic monitoring analysis system(SMAS) except five field sensors. After the installation of the new SMAS, we have carried out the site acceptance test(SAT) to confirm the field functions. The results of SAT satisfy the requirements of the fabrication technical specification. This new SMAS is operating at HANARO instrument room to acquire and analyse the signal of earthquake.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.159-166
• /
• 1999

One of the most general methods that can evaluate the rippability is the seismic exploration. However, most field engineers have hardly used the seismic exploration. Instead of using the seismic exploration, they have usually used rock hammer and naked eyes to confirm the degree of rippability for soil, ripping rock and blasting rock. Therefore, to excavate the ground rationally, it is required to establish a quantitative criterion that can be used for distinguishing rippability. In this study, we find out the characteristics of rock strength through laboratory and field tests. The weathering condition of rock exposed to air due to excavation of soil layer and the variation of rock strength caused by weathering were investigated. A relationship between rock strength values that are obtained from uniaxial compression test, slaking durability test, point load test, schmidt hammer test and absorption ratio test is analyzed. The relationship is expressed in a form of equation by which we can evaluate the rock strengths obtained from simple laboratory and field tests. To evaluate rippability in a reasonable manner, a quantitative approach is proposed and a check list of rippability is developed based on the proposed methodology. It is recommended to modify the proposed method for evaluation of rippability in the field.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.352-359
• /
• 2005

In this study, seismic refraction survey and MASW at dam crest and down-hole test and cross hole test in the boring holes located in dam crest through the core are performed to fin out dynamic material properties, are needed to evaluate dynamic safety of rockfill dam using dynamic analysis method. From the field test and geophysical exploration, applied such as above, p-wave and s-wave velocity profile of each layer of dam body. Dynamic material properties, such as elastic modulus, shear modulus, poissong's ration, are obtained from p-wave and s-wave velocity profile and density profile from formation density logging test.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.237-240
• /
• 2007

The evaluation of shear modulus (or shear wave velocity) profile of site is very important in the various fields of geotechnical engineering. To obtain shear wave velocity profile, various in-situ seismic methods using surface waves have been developed. These surface wave based in-situ seismic methods have their own strength and weakness. In this study, new seismic site characterization method using the harmonic wavelet analysis of wave (HWAW) was proposed to overcome some of weaknesses in the existing surface wave based seismic site characterization methods. HWAW method which is based on time-frequency analysis using harmonic wavelet transform have been developed to determine phase and group velocities of waves. In order to estimate the applicability of HWAW method, field tests were performed. Through field applications and comparison with other test results, the applicability of the proposed method were verified.

• 한국지진공학회논문집
• /
• 제18권3호
• /
• pp.125-132
• /
• 2014

In this study, a series of dynamic centrifuge tests were performed for a soil-foundation-structural interaction system in dry sand with various embedded depths and superstructure conditions. Sinusoidal wave, sweep wave and real earthquake were used as input motion with various input acceleration and frequencies. Based on the results, a natural period and an earthquake load for soil-structure interaction system were evaluated by comparing the free-field and foundation accelerations. The natural period of free field is longer than that of the soil-foundation-structure system. In addition, it is confirmed that the earthquake load for soil-foundation-structure system is smaller than that of free-field in short period region. In contrast, the earthquake load for soil-foundation-structure interaction system is larger than that of free-field in long period region. Therefore, the current seismic design method, applying seismic loading of free-field to foundation, could overly underestimate seismic load and cause unsafe design for long period structures, such as high-rise buildings.

• 한국지반공학회논문집
• /
• 제24권10호
• /
• pp.33-43
• /
• 2008

본 연구에서는 현재 운영 중인 경상북도 영천시에 위치한 Y댐에 대하여 댐 축조재료 중 코어죤의 최대전단탄성계수 산정을 위한 합리적인 전단파속도를 산정하기 위하여 시추공을 이용한 크로스홀시험과 다운홀시험을 수행하였고, 지표탐사인 MASW(Multi-channel Analysis of Surface Wave, 다중수의 수진기를 이용한 주파수영역 표면파해석)와 반사법 탄성파탐사를 수행하였다. 현장시험으로부터 코어죤의 심도별 전단파속도를 산정하고 그결과들을 비교 분석하였다. 또한, 현장시험 결과와 Sawada의 경험적 제안식을 비교 분석하였다. 본 연구의 목적은 댐 코어죤의 심도별 전단파속도를 산정하기 위해 수행된 4종류의 현장시험 결과를 비교 분석하고, 시험결과와 경험적 제안식을 비교하여 경험식의 적정성을 판단하고, 기존댐 코어죤의 심도별 전단파속도를 합리적으로 산정하는 방법을 제안하는 데 있다. 시험결과, 측정심도 내(18m 이내)에서 다운홀시험, MASW, 반사법탐사에 의한 코어죤의 심도별 전단파속도 산출 결과는 유사한 결과를 보였으며, MASW와 반사법탐사의 경우에는 심도 30m까지 그 산출 결과가 거의 같은 것으로 나타났다. 기존 댐 로어죤의 심도별 전단파속도를 산출하고자 할 때 운영 중인 댐 코어죤에 시추공을 형성하는 것은 현실적으로 매우 어려운 사안임을 감안한다면 MASW나 반사법탄성파탐사와 같은 지표탐사에 의한 전단파속도 산정이 가장 현실적인 방법일 것으로 판단된다. 현장조사가 여의치 않거나 예비조사의 경우에는 기존의 방법과 같이 Sawada의 경험식을 이용할 수 있는데, 경험식을 이용할 경우 Sawada의 제안식 중 하한값을 적용하는 것이 합리적인 방법일 것으로 판단되었다.

• 한국지반공학회논문집
• /
• 제19권2호
• /
• pp.135-146
• /
• 2003

본 논문에서는 지반의 전단파 속도 주상도를 획득하기 위한 현장 시험법으로 표준관입시험 샘플러를 가진원으로 이용한 업홀 시험기법을 연구하였다. 제안된 업홀 시험은 지표면에 여러 개의 속도계를 시추 장비로부터 일정한 간격으로 한 줄로 배치를 하고 표준관입시험의 시료 채취기로부터 발생되는 진동원의 신호를 계측하여 지반의 전단파속도 주상도를 도출하는 방법이다. 여러 선행 실험을 통하여 확립된 업홀 시험 방법 및 결과 분석법에 대해 소개하였다. 진동원과 감지기간의 거리가 멀기 때문에 지반에서 진행되는 전단파의 진행 경로는 지반의 강성 변화에 근거한 굴절 경로를 적용하였다. 국내 3개 시힘 부지에서 수행한 업홀 시힘결과를 동일 부지에서 행한 다운홀, SASW시험 및 SPT-N치와 비교하여 봄으로써 제안된 업홀 시험의 현장 적용성을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제16권3호
• /
• pp.241-257
• /
• 2003

The first seismically isolated structure in Taiwan was completed in early 1999. Seven new bridges of the Second National Freeway located at Bai-Ho area, a region which is considered to be of high seismic risk, have been designed and constructed with lead-rubber seismic isolation bearings. Since this is the first application of seismic isolation method to the practical construction in Taiwan, field tests were conducted for one of the seven bridges to evaluate the assumptions and uncertainties in the design and construction. The test program is composed of ambient vibration tests, forced vibration tests, and free vibration tests. For the free vibration tests, a special test setup composed of four 1000 kN hydraulic jacks and a quick-release mechanism was designed to perform the function of push-and-quick release. Valuable results have been obtained based on the correlation between measured and analytical data so that the analytical model can be calibrated. Based on the analytical correlation, it is concluded that the dynamic characteristics and free vibration behavior of the isolated bridge can be well captured when the nonlinear properties of the bearings are properly considered in the modeling.