• 한국초전도ㆍ저온공학회논문지
• /
• 제21권2호
• /
• pp.45-49
• /
• 2019

This paper reports comparison between analytic and numerical simulation approaches for calculation of screening current and screening current induced field in a high temperature superconductor magnet. Bean slab model is adopted to calculate screening current and SCF analytically, while the finite element method numerically. A case study of screening current and SCF calculation are conducted with a magnet, a 7 T 68 mm cold-bore multi-width no-insulation GdBCO magnet built and tested by Massachusetts Institute of Technology Francis Bitter Magnet Laboratory. In this study, we assume the magnet is dunked in liquid nitrogen at 77 K. Furthermore, the simulation results are compared in terms of computation time and accuracy. Finally, discussion on the different methods together with the comparison between the calculations and experiment is provided.

• 한국작물학회지
• /
• 제50권4호
• /
• pp.276-280
• /
• 2005

Low temperature is one of the most severe abiotic stress factors limiting growth, productivity and distribution of winter cereals. Reliable field screening method, which can detect small differences in winter survival, is important for the effective selection and development of plants to identity superior cold tolerant winter cereal genotypes. This study was undertaken to provide improved screening method of winter hardiness in the field by increasing the accuracy in evaluating winter hardiness of barley (Hordeum vulgare L.). We introduced furrow in field screening of winter survival. By sowing the plants at the ridge and base, we could minimize the effect of topographic variation in a field by giving higher and lower level of stress at the same time. This method could be used by breeders to conduct accurate evaluation of winter hardiness by selecting the better treatment, which shows close to normal distribution, among the winter survival rate from the ridge, base and mean survival rate of the two in a screening field.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2009년도 Korea Superconductivity Society Meeting 2009
• /
• pp.24-24
• /
• 2009

• 한국초전도ㆍ저온공학회논문지
• /
• 제2권1호
• /
• pp.31-34
• /
• 2000

this paper deals with the initial magnetic field decay for a large scale superconducting magnet e.g. NMR/MRI magnet. The high resolution image can not be obained during the periods of the initial field decay. It is known that all superconducting materials have the property of diamagnetism. This diamagnetism is usually explained with the concept of screening current. We assumed that the existence of the screening currebt. we assumed that the existence of the screening current makes the current distribution in the superconducting wire non-uniform. And the initial magnetic field decay is caused steady current state in the view of its pattern. The initial magnetic field decay is caused by the change of the current distribution between the energizing state and persistent current mode. in this paper the theoretical analysis for the current distributions has been introduced for each state. The experiments have been carried out to verify transport currents in order to veperiments, it small at the higher transport current.

• The Korean Journal of Ceramics
• /
• 제5권4호
• /
• pp.386-389
• /
• 1999

Effect of high voltage screening was examined on mechanical strength of titania ceramics with two different surface roughness. Roughly finished sample showed degraded mechanical strength meaning that the introduced flaw played the role of starting point of mechanical fracture. On such sample, electrically weak parts were eliminated by applying a screening field. Mechanical strength measurement on survived parts revealed that after screening the Weibull plots bended to become a convex curve while plots at high strength region were almost the same. This result means that relatively low mechanical strength parts were eliminated by the electrical method. As a result the Weibull modulus calculated from all the data increased, demonstrating the effect of high voltage screening on titania ceramics containing fracture controlling surface flaws. Roles of the surface flaw such as a common weak spot for both failures are disscussed in relation to the electric field concentration similar to that of mechanical stress.

• 한국작물학회지
• /
• 제52권2호
• /
• pp.129-133
• /
• 2007

벼 바이러스병에 대한 최선의 방제책은 저항성 품종의 육성이라 할 수 있다. 저항성 품종의 육성을 위해서는 정밀하고 대량으로 검정 할 수 있는 검정법의 확립이 무엇보다 중요하므로 이를 위해 격리 검정망실을 건립 보독충을 방사한 후 이를 계대유지 하여 검정에 이용하였다. 망실내에 바이러스 보독충율 변이에서 연중 높은 보독충율을 유지하였으며, 매개충의 밀도도 검정에 충분하게 유지되었다. 망실을 이용한 바이러스병 저항성검정의 효율성은 줄무늬잎마름병은 $92{\sim}100%$, 오갈병은 100%의 검정효율을 보였으며, 이러한 대량검정법은 실내유묘검정과 고도의 정의 상관을 나타내어 포장검정의 대량검정과 실내유묘검정의 정밀도 등 장점을 겸비한 유용한 방법으로 확인되었다.

• 한국식물병리학회지
• /
• 제1권2호
• /
• pp.115-121
• /
• 1985

벼 흰빛잎마름병에 대한 새로운 포장 저항성 검정법을 모색하기 위하여 검정 식물체 접종법과 인접 식물체 접종법을 비교 검토하였다. 새로운 검정법인 검정 식물체 접종법에서는 포장 저항성 검정 식물체를 전엽접종한 발병엽으로부터 새로 출엽된 잎에 이차전염된 발병 엽면적율을 측정하였다. 검정 식물체 접종으로 검정된 포장 저항성 정도는 인접 식물체 접종 결과와 높은 상관이 인정되었으나 포장 저항성 정도는 검정 식물체 접종법에서 명확히 구분되었다. 공시한 33품종 중에서는 밀양 42호, 삼강벼, 태백벼, 한강찰벼, 섬진벼, 70 X-46, 중국 45호 등이 강한 포장 저항성을 보였다. 새로운 포장 저항성 검정법은 품종의 질적 저항성 및 포장 저항성을 동시에 검정할 수 있을 뿐만 아니라 다른 검정법에 비하여 노력과 포장 면적이 적게 들기 때문에 유용한 검정법으로 이용될 수 있을 것으로 생각된다.

• 품질경영학회지
• /
• 제33권4호
• /
• pp.88-95
• /
• 2005

Multistage screening is a common practice when a component has a critical effect on the function of the assembly. A defect in a component might incur malfunction of an electronic device, resulting in a great amount of loss. Multistage screening, including duplicated screening inspections, may provide a good solution for this problem when inspection errors are present. In the company studied here, the manufacturing process of the multiple layer chip capacitor includes two-stage screening. In the first stage, screening inspection is performed repeatedly until no defects are found in the lot. In the second stage, sampling inspection is performed by a group of experts prior to shipment. In this article, we review the procedure used in the field and suggest a revised model of the multiple screening procedure and solution method for this situation. The usefulness of the proposed model is discussed through a practical example.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권9호
• /
• pp.3458-3481
• /
• 2021

Existing methods for blind identification of linear block codes without a candidate set are mainly built on the Gauss elimination process. However, the fault tolerance will fall short when the intercepted bit error rate (BER) is too high. To address this issue, we apply the reverse algebra approach and propose a novel "two-step-screening" algorithm by solving the linear error equations on the binary Galois field, or GF(2). In the first step, a recursive matrix partition is implemented to solve the system linear error equations where the coefficient matrix is constructed by the full codewords which come from the intercepted noisy bitstream. This process is repeated to derive all those possible parity-checks. In the second step, a check matrix constructed by the intercepted codewords is applied to find the correct parity-checks out of all possible parity-checks solutions. This novel "two-step-screening" algorithm can be used in different codes like Hamming codes, BCH codes, LDPC codes, and quasi-cyclic LDPC codes. The simulation results have shown that it can highly improve the fault tolerance ability compared to the existing Gauss elimination process-based algorithms.

• Journal of Genetic Medicine
• /
• 제5권1호
• /
• pp.7-14
• /
• 2008

Twenty years have passed since a prenatal screening for Down syndrome and neural tube defect was applied to obstetric field. The Quad test (AFP, hCG, uE3, Inhibin-A) of the second trimester and the combination test (PAPP-A, hCG, NT) of the first trimester became popular now. The recent trend of prenatal screening is to combine these two screening tests together in order to increase a detection rate of Down syndrome. Three types of screening methods are introduced as follows; integrated test, sequential test and contingent test. In addition to combination of each test, an incorporation of characteristic ultrasound findings of Down syndrome is suggested for its risk calculation. The absence of fetal nasal bone would be a very useful marker especially in the first trimester screening test. According to a change of way calculating risk of Down syndrome, obstetrician's role will be more increased not by passive participation, but by active participation using ultrasound in risk calculation.