• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.285-288
• /
• 1996

Iron loss is a possible source of performance deterioration, especially for a torque regulation, in field oriented induction machine. In this paper, study on the model of an induction machine with iron losses, a flux estimation strategy, the design of direct and indirect field oriented controller, a precise torque regulation scheme and the determination of a core lost resistance are discussed. Simulation and experimental results are also included and show the effectiveness of the proposed analysis and the proposed control strategy.

• Journal of Electrical Engineering and Technology
• /
• 제6권1호
• /
• pp.133-138
• /
• 2011

This paper proposes a simple but robust self-tuning fuzzy logic controller for the speed regulation of a dual star induction machine based on indirect field oriented control. For feed the two star of this machine, two voltage source inverters based on sinus-triangular pulse-width modulation techniques are introduced. The simulation results show the robustness and good performance of the proposed controller.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.395-396
• /
• 2017

차세대 고속 이동수단에 필요한 고전력 전동기에 대한 관심이 꾸준히 증가하는 추세이다. 본 논문에서는 고전력 동기전동기(PMSM) 구동에 필요한 전력 인버터의 제어 및 센서리스 제어기법을 적용한 자속 기준 제어(Field-oriented control)를 시뮬레이션을 통해 입증하였다. 고전력에서 인버터 스위치의 전력부담을 줄이기 위해 3-레벨 인버터를 설계하고, 벡터 제어 SVPWM 방식을 적용하였으며 고전력 및 고속 PMSM의 파라미터에 맞추어 센서리스(sensorless) 제어기를 설계하였다. 센서리스 제어에는 모델 기준 적응 시스템(MRAS)을 통해 속도 및 위치를 예측하여 모터를 제어하는 방식을 적용하였다. 가속시 5초간 가가속도 값을 적용하여 필요 토크 및 속도제어를 Matlab/Simulink에서 설계 및 구현하고, 예측속도와 실제 모터속도는 최대 0.01 rad의 오차를 나타났고, 67초 동안 목표 속도 500 rad/s까지 가속함을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권1호
• /
• pp.100-107
• /
• 2003

This study was to control magnetic field orientation-typed sensorless vector control by applying the theory of a rotor flux observer to drive an induction motor. This research suggested a new speed estimation method that estimates speed with the rotor flux obtained by using a flux observer and the variable of state current detected by a current sensor without a speed sensor. Because the speed estimation method is independent from the motor constants, it is not necessary to control the gain of the parameters and the algorithm is simple. In the findings of the study, the researcher was convinced of the control function and the possibility of realization in the simulation experiment of sensorless vector control system by using DSP(Digital Signal Prosessor).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.32-34
• /
• 2009

The field oriented control of induction motors is widely used in high performance applications. However, detuning caused by parameter disturbance still limits the performance of these drives. In order to accomplish variable speed operation, conventional PI-like controllers are commonly used. These controllers provide limited good Performance over a wide range of operation, even under ideal field oriented conditions. This paper is proposed model reference adaptive fuzzy control(MFC) and artificial neural network(ANN) based on the vector controlled induction motor drive system. Also, this paper is proposed control of speed and current using fuzzy adaption mechanism(FAM), MFC and estimation of speed using ANN. The proposed control algorithm is applied to induction motor drive system using FAM, MFC and ANN controller. Also, this paper is proposed the analysis results to verify the effectiveness of this controller.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.404-407
• /
• 2009

The field oriented control of induction motors is widely used in high performance applications. However, detuning caused by parameter disturbance still limits the performance of these drives. In order to accomplish variable speed operation conventional PI-like controllers are commonly used. These controllers provide limited good performance over a wide range of operation even under ideal field oriented conditions. This paper is proposed adaptive fuzzy controller(AFC) and artificial neural network(ANN) based on the vector controlled induction motor drive system. Also, this paper is proposed control of speed and current using fuzzy adaptation mechanism(FAM), AFC and estimation of speed using ANN. The proposed control algorithm is applied to induction motor drive system using FAM, AFC and ANN controller. Also, this paper is proposed the analysis results to verify the effectiveness of this controller.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제4권2호
• /
• pp.117-120
• /
• 2002

Scelionid eggParasitoids Play an important role in biological control of some economically important pentatomids. Stink bug (Canthecona furcellatta Wolff,) is an important predator of Tasar silkworm larvae (Antheraea mylitta D.) and causes 30-40 percent loss in tasar silk industry. Psix striaticeps (Scelionid: Hymenoptera) has been found to be an important egg parasitoid. The parasitization potential of f striaticeps is mere than 60 percent and the sex ratio is female oriented. Studies indicate that the maintenance of existing scelionid population by avoiding harmful practices and the augmentation of scelionids either directly releasing them in the field or by indirectly making the field environment more favorable for them is an important aspect to control the pentatomid population in sericulture. Female bias sex ratio is advantageous to increase the parasitoid population in the field. 24-hour-old egg of stink bug and one-day old parasitoid is suitable for producing maximum progeny. 1 : 30 of parasitoid: host ratio is needed to regulate the estimated population in silkworm rearing field.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2067-2069
• /
• 2002

The study of the vector control of the induction machine without speed sensor is going on and there are the adaptive performance method to use the flux observer. This study is to make the vector control without the speed sensor based on the flux oriented reference vector control theory. This paper proposes the new speed follow-up method to deduce the current value in the current sensor and the 2 order flux observer based on the observer theory and examine the possibility to realize the flux oriented vector control system using the simulation in this proposed method of this study.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1136-1139
• /
• 2000

The paper describes a new and rigorous mathematical model for the rotor field oriented system with induction motor which uses the estimated speed and rotor flux based on a Model Reference Adaptive System, as well as the real-time approach. The estimated speed and rotor flux is used for the speed and flux feedback control. The stability and the convergence of the estimator are improved on the basis of hyperstability theory for non-linear systems. The real-time controller and estimator are implemented with a sampling period of $926{\mu}s$ using a dual TMS320C44 floating-point digital signal processor. The validity of the proposed method is verified by simulation, and also, the sensorless control was tested on the propulsion system simulator, used for the development of Korean High-Speed Railway Train (KHSRT) [5].

• 조명전기설비학회논문지
• /
• 제17권1호
• /
• pp.68-73
• /
• 2003

본 연구는 유도전동기 구동에 관측기 이론을 적용하고 자계 방향형 벡터제어에 기초하여 센서리스 벡터구동 시스템을 개발한 것이다. 속도추정은 지령전압과 전류센서에서 검출한 전류와 관측기에서 구한 2차 자속으로 행하는 새로운 방법을 나타내었다. 이 속도추정은 자속과 유도전동기 정수만으로 결정되므로 파라미터의 이득 조정이 필요 없고 연산이 간단하다. 도출한 벡터제어 이론에 기초하여 유도전동기 구동을 위한 센서리스 속도제어 시스템을 설계 제작하였다. 그리고 시뮬레이션을 통해서 각 제어기의 이득정수와 관측기 이득을 결정하고 센서리스 벡터구동의 실험을 실현하였다.