• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.539-545
• /
• 2010

The field plate test has a good potential for determining since it measures both plate pressure and settlement. The deformation modulus of rock mass is differently measured for status of structures. The values of deformation modulus are obtained from laboratory test (uniaxial and triaxial test) and field test (pressuremeter test). Plate load test should be conducted by different loading plate sizes for geological structure of rock mass and scale of structures. In this paper, large plate load tests were performed to predict of structure's behavior and evaluate the ultimate bearing capacity of the foundation on soft rock. Simultaneously, deformation modulus of rock mass was estimated by back analysis of stresses measured in field test under rock mass. Finally, we verified the validation of deformation modulus of rock mass through result of large plate load test and numerical simulation.

• 한국지반공학회논문집
• /
• 제21권6호
• /
• pp.67-79
• /
• 2005

현장 평판재하시험은 평판에 작용하는 하중과 변위를 동시에 측정하기 때문에 역학적인 특성치 결정의 가능성이 높은 시험방법이다. 그러나 지금까지 평판재하시험으로부터 추정한 탄성계수는 일정 변위를 유발한 하중강도하에서의 지지력계수로부터 구한 하나의 상수값으로서, 이는 포장구조에서 노상이 경험하는 사용하중 단계에서의 대표적인 변형특성치로 결정하기에는 어려움이 있다. 포장설계시 사용되는 회복탄성계수 개념의 변형계수는 중간변형률$(0.01\%\sim0.1\%)$ 영역에서의 값으로서, 현장 노상토의 경우에도 이와 같은 변형률 범위에서의 변형계수를 평가하는 것이 중요하다. 본 논문에서는 노상 현장에서 반복평판재하시험을 이용하여 중간변형률 영역에서의 변형계수를 산정하는 방법을 제안하였다. 이의 신뢰성을 검토하기 위하여 현장에서 크로스홀 시험과 실내에서 공진주시험을 수행하여 전체변형률 영역에서의 현장의 변형특성을 평가하여 평판재하시험 결과와 비교하였다. 두 시험결과 사이의 응력상태를 고려하면 변형률에 따른 변형계수의 값과 경향이 비교적 일치하였고, 제안된 반복식 평판재하시험을통해 현장변형계수의 평가가 가능함을 알 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.455-465
• /
• 2008

In this study, the load distribution and deformation of rock-socketed drilled shafts subjected to axial load are investigated based on small scale model tests. In order to analyze the effects of major influencing factors of end bearing capacity, Hoek-cell triaxial tests were performed. From the test results, it was found that the initial slope of end bearing load transfer (q-w) curve was highly dependent on rock mass modulus and pile diameter, while the ultimate unit toe resistance ($q_{max}$) was influenced by rock mass modulus and the spacing of discontinuities. End bearing load transfer function of drilled shafts socketed in rock was proposed based on the Hoek-cell triaxial test results and the field loading tests which were performed on granite and gneiss in South Korea. Through the comparison with pile load tests, it is found that the load-transfer curve by the present study is in good agreement with the general trend observed by field loading tests, and thus represents a significant improvement in the prediction of load transfer of drilled shaft.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.479-488
• /
• 2005

Geopier soil reinforcement system which crushed aggregate is put into a hole and rammed the aggregate with tamper is a viable alternative to deep foundation to over-excavation and replacement. Also, Geopier is intermediate foundation of deep and shallow foundation. In this paper, the value of Geopier element stiffness modulus($K_g$) when designed is compared with the measured value($K_g$) by the in-situ modulus Load test in the field. Also, this paper presents a technology overview of system capabilities and application for foundation reinforcement of structures.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.399-402
• /
• 2007

The classical two dimensional modulus of rupture test was generalized to three dimensions. Using this new method, the biaxial tensile strength can be measured with only one actuator. A circular plate is used in this method unlike a prismatic beam in the classical modulus of rupture test. The stress field in this specimen is isotropic and uniform in a plane paralle1 to the bottom surface of the specimen. The relation between the applied load and the maximum stress is derived analytical1y using Timoshenko's solution. A set of experimental data is presented.

• International Journal of Railway
• /
• 제6권3호
• /
• pp.112-119
• /
• 2013

A mid-size RC test apparatus (MRCA) equipped with a program is developed that can test samples up to D=10 cm diameter and H=20 cm height which are larger than usual samples used in practice. Using the developed RC test apparatus, two types of crushed trackbed foundation materials were tested in order to get the shear modulus reduction curves of the materials with changing of shear strain levels. For comparison purpose, large repetitive triaxial compression tests (LRT) with samples of height H=60cm and diameter D=30 cm were performed also. Resilient modulus obtained from the LRT was converted to shear modulus by considering elastic theory and strain level conversion and were compared to shear modulus values from the MRCA. It is found from this study that the MRCA can be used to test the trackbed foundation materials properly. It is found also that strain levels of $E_{v2}$ mostly used in the field should be verified considering the shear modulus reduction curves and proper values of $E_{v2}$ of trackbed foundation must be used considering the strain level verified.

• 한국지반공학회논문집
• /
• 제19권6호
• /
• pp.15-22
• /
• 2003

강관 내부 속채움한 현장타설말뚝에 대한 기존의 하중전이 측정에서는 강관의 변형률만 측정하고 콘크리트의 변형률은 강관과 동일하다고 가정하였으며, 시방서에 규정한 방법으로 구한 강관과 콘크리트의 탄성계수를 이용하여 말뚝 구성부재의 응력 및 축하중을 산정하였다. 그러나 강관의 변형률만 측정하여 강관과 콘크리트가 완전합성 거동하는 것으로 산정한 축하중은 실제 하중값과 상당한 차이를 보이고 있어 강관 내부 속채움한 현장타설말뚝의 거동을 정확히 분석할 수 없었다. 본 연구에서는 현장에서 제작한 콘크리트 공시체의 압축강도 시험을 통하여 탄성계수를 구하고 강재와 콘크리트의 변형률을 각각 측정할 수 있는 변형봉 센서를 이용하여 새로운 말뚝축하중 측정 방법을 제안하였다. 변형봉 센서를 사용하여 말뚝축하중을 산정할 경우 콘크리트의 탄성계수는 현장에서 제작한 콘크리트 공시체의 압축강도 시험에서 구하였으며, (0.2-0.6)$f_{ck}$의 응력 범위에 해당하는 평균접선기울기를 탄성계수로 사용하였다. 세 개의 현장타설말뚝에 대해 수행된 하중전이 측정 실험 결과를 이용하여 현장 적용성을 확인하였다. 변형봉 센서의 적용성은 대구경 현장타설말뚝에 대한 축하중 분포도를 통하여 확인하였는데, 말뚝머리에서 계산된 하중은 강관 내부속채움한 현장타설말뚝의 경우 실제작용하중에 비하여 -11∼-16% 오차를 나타내었으며, 현장타설 철근콘크리트말뚝의 경우 3.4% 오차를 나타내었다.

• 한국환경복원기술학회지
• /
• 제10권6호
• /
• pp.44-52
• /
• 2007

Recently, oystershell wastes cause serious environmental problem and the need for the researches on the recycling of oystershell have been increased and various methods are already in operation. Field plate bearing tests and numerical analysis were performed to investigate the bearing capacity of oystershell filled geotextile gabion which utilized the waste oystershell at the coastal oyster farm site. The waste oystershell mixed soil specimens were prepared for the laboratory test and field test in terms of varying blending ratio of granite soil and oystershell. Based on the cyclic plate load test results, the spring constant, subgrade modulus of ground, and the reinforcing parameters were determined. The field plate load test results indicate that the bearing capacity of the soil ground with the oystershell mixed ratio of 20% is greater than that of the original ground. Two-dimensional numerical analysis was evaluated the expected deformation in the given conditions. Analysis results show a similar characteristics on bearing capacity with the results of the field plate load test. These findings suggest that the oystershells are very promising construction materials for landfill and earth embankment in coastal area.

• 대한토목학회논문집
• /
• 제28권4C호
• /
• pp.197-203
• /
• 2008

풍화된 암반에 근입된 말뚝의 선단지지거동은 신선암의 강도보다는 절리를 포함한 암반 상태에 의존한다. 본 연구에서는 암반상태가 말뚝의 선단지지력에 미치는 영향을 알아보기 위해 먼저 총 4부지의 암반에 근입된 13본의 현장타설콘크리트 말뚝에 대한 재하시험, 그리고 재하시험 부지의 지반조사 자료를 포함하는 데이터베이스를 구축하고, 말뚝선단부의 거동과 암반물성치의 상관관계를 분석하였다. 선단지반반력계수와 암반물성치의 상관관계 분석 결과 암석의 일축압축강도와 지반반력계수 사이에는 일관된 상관관계를 찾을 수 없었으나, 암반의 상태를 나타내는 물성치인 $E_m$, $E_{ur}$, RMR, 그리고 RQD 등과 지반반력계수의 상관계수는 대부분 0.7 이상으로 매우 뛰어난 상관성을 보였다. 또한, 기존의 방법으로 추정한 선단지지력과 실측 선단지지력의 비교를 통해 기존 방법의 적용성을 검증하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.603-610
• /
• 2005

The end bearing behavior of piles socketed in weathered/soft rock is generally dependent upon the mass conditions of rock with fractures rather than the strength of intact rock. However, there are few available data and little guidance in the prediction of the end bearing capacity of drilled shafts socketed in weathered/soft rock, considering rock mass weathering. Therefore, a database of 13 load tests was constructed first, and new empirical relationships between the base reaction modulus of piles in rock and rock mass properties were developed. No correlation was found between the compressive strengths of intact rock and the base reaction modulus of weathered/soft rock. The ground investigation data regarding the rock mass conditions(e.g. Em, Eur, RMR, RQD) was found to be highly correlated with the base reaction modulus, showing the coefficients of correlation greather than 0.7 in most cases. Additionally, the applicability of existing methods for the end bearing capacity of piles in rock was verified by comparison with the field test data.