• Journal of Welding and Joining
• /
• v.7 no.1
• /
• pp.28-35
• /
• 1989

The fatigue crack growth behavior in GTA butt welded joints of Al-Alloy 5052-H38 was examined using Single Edge Notched(SEN) specimens. It is well known that welding residual stress has marked influence on fatigue crack growth rate in welded structure. In the general area of fatigue crack growth in the presence of residual stress, it is noted that the correction of stress intensity factor (K) to account for residual stress is important for the determination of both stress intensity factor range(.DELTA.K) and stress ratio(R) during a loading cycle. The crack growth rate(da/dN) in welded joints were correlated with the effective stress intensity factor range(.DELTA.Keff) which was estimated by superposition of the respective stress intensity factors for the residual stress field and for the applied stress. However, redistribution of residual stress occurs during crack growth and its effect is not negligible. In this study, fatigue crack growth characteristics of the welded joints were examined by using superposition of redistributed residual stress and discussed in comparison with the results of the initial welding residual stress superposition.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.12
• /
• pp.3532-3534
• /
• 2014

In theoretical simulations of proton transfer in DNA, environmental factors nearly have not been considered. In our calculations, using QM/MM method on the basis of CP2K, proton transfer on adenine-thymine base pair is studied in water, at wide scope temperature, and under the external electric field. Our results indicate that the external electric field induces the proton transfer at room temperature, and its intensity and temperature have some effect on hole localization and proton transfer.

• Electronics and Telecommunications Trends
• /
• v.33 no.2
• /
• pp.56-63
• /
• 2018

A light field (LF) is a field for expressing the intensity and direction of light reflected from a subject in a 3D space. Dual LF cameras are equipped in smart phones in Korea, mainly those by Samsung and LG. Lytro, Apple, Nvidia, MIT Media Lab, Magic Lip, and NHK are also developing LF camera technologies. LF displays are being researched by ETRI, Samsung Electronics, KIST, KAIST, SNU, MIT Media Lab, USC, HP, Apple, Microsoft, SeeReal, Musion Eyeliner, Dimenco, and Holografika.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.2
• /
• pp.70-72
• /
• 2005

The relation between electrical properties of YBaCuO ceramic superconductor and externally applied magnetic field was studied. Electrical characteristics of the superconductor with trapped magnetic fluxes are extremely sensitive to the external magnetic field and show the different responses which depend on the direction of the magnetic field. Considering these properties of the superconductor with trapped magnetic fluxes, a magnetic sensor is fabricated. This sensor is able to detect simultaneously both the intensity and the direction of the magnetic field. The sensitivity of the sensor is less than 10$^{-4} T.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.18-21
• /
• 2002

We present a phase covariance model that can well represent stimulus intensity as well af feature binding (i.e., covariance). The model is represented by complex neural equations, which is a mean field model of stochastic neural model such as Boltzman machine and sigmoid belief networks.

• Journal of the Optical Society of Korea
• /
• v.1 no.1
• /
• pp.23-25
• /
• 1997

In this paper we will show theoretically that a refractive index grating exhibits a retro-self-focusing effect and an accompanying pinholing effect under the Gaussian intensity distribution of an incident optical field. Those effects result from an effective wave number change of the medium due to the intense optical field.

• Journal of Korean Society of Forest Science
• /
• v.89 no.5
• /
• pp.591-597
• /
• 2000

This studies were carried out to investigate the optimum shading for seedling cultivation of Cornus controversa and C. walteri. The experiment was performed under five different shading scheme such as 100%, 50%, 30%, 10%, and 2% of the natural full sun light intensity for 7 months in the field condition. Two species showed the highest height growth under 50% of relative light intensity, and the highest diameter growth at root collar was observed both under 100% and 50% of relative light intensity. C. controversa seedlings grown under 50% of relative light intensity produced more total biomass than control seedlings, but root biomass was less in the seedlings under 50% of relative light intensity. In case of C. walteri, total biomass production of the seedlings under 50% of relative light intensity was lower than that of the seedlings under full sun light intensity, but leaves and shoot biomass was slightly high under 50% of relative light intensity. Great reductions of height growth and diameter growth at root collar, and biomass production were observed below 30% of relative light intensity in the both species. T/R ratio of the two species was highest under 30% of relative light intensity, and the chlorophyll content of the seedlings tended to be increased by reduction of relative light intensity.

• Progress in Medical Physics
• /
• v.30 no.4
• /
• pp.89-93
• /
• 2019

Purpose: This study aims to develop new markers based on silicone rubber and urethane rubber to enhance visibility in low magnetic field magnetic resonance (MR) imaging. Methods: Four types of markers were fabricated using two different base materials. Two of the markers were composed of two different types of silicone rubber: DragonSkin™ 10 MEDIUM and BodyDouble™ SILK. The other two markers were composed of types of urethane rubber: PMC™ 780 DRY and VytaFlex™ 20. Silicone oil (KF-96 1000cs) was added to the fabricated markers. The allocated amount of oil was 20% of the weight (wt%) of each respective marker. The MR images of the markers, with and without the silicone oil, were acquired using MRIdian with a low magnetic field of 0.35 T. The signal intensities of each MR image for the markers were analyzed using ImageJ software and the visibility for each was compared. Results: The highest signal intensity was observed in VytaFlex™ 20 (279.67±3.57). Large differences in the signal intensities (e.g., 627% in relative difference between BodyDouble™ SILK and VytaFlex™ 20) among the markers were observed. However, the maximum difference between the signal intensities of the markers with the silicone oil showed only a 62% relative difference between PMC™ 780 DRY and DragonSkin™ 10 MEDIUM. An increase in the signal intensity of the markers with the silicone oil was observed in all markers. Conclusions: New markers were successfully fabricated. Among the markers, DragonSkin™ 10 MEDIUM with silicone oil showed the highest MR signal intensity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.5 s.120
• /
• pp.553-562
• /
• 2007

In this paper, we designed and implemented the system for telemetering ELF(Extremely Low Frequency) magnetic field intensity. The magnetic field measurement system used a 3-axis magnetic field sensor to measure the magnetic field with isotropy and the equalizer to compensate the frequency characteristic in band. By multiplexing three output signals of the magnetic field sensor in time domain, we got the uniform gain and frequency characteristic among three axes. This system was designed that the magnetic field measurement level range was $0.01{\sim}10.0\;uT$ and the measurement frequency band was $40{\sim}180\;Hz$. The control system would access to the magnetic field measurement system with RF and the maximum access distance was 1.0 km. We confirmed that the measurement level error of the fabricated system was within 5 %. The fabricated system was installed to a golf practice range where a high voltage power transmission line was crossed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.5
• /
• pp.629-635
• /
• 2010

An SGBEM (symmetric Galerkin boundary element method)-FEM alternating method has been proposed by Nikishkov, Park and Atluri. This method can be used to obtain mixed-mode stress intensity factors for planar and nonplanar three-dimensional cracks having an arbitrary shape. For field applications, however, it is necessary to verify the accuracy and consistency of this method. Therefore, in this study, we investigate the effects of several factors on the accuracy of the stress intensity factors obtained using the abovementioned alternating method. The obtained stress intensity factors are compared with the known values provided in handbooks, especially in the case of internal and external circumferential semi-elliptical surface cracks. The results show that the SGBEM-FEM alternating method yields accurate stress intensity factors for three-dimensional cracks, including internal and external circumferential surface cracks and that the method can be used as a robust crack analysis tool for solving field problems.