• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1697-1704
• /
• 2018

As a key component of lighting location system (LLS) for lightning warning, the atmospheric electric field measuring is required to have high accuracy. The Conventional methods of the existent electric field measurement meter can only detect the vertical component of the atmospheric electric field, which cannot acquire the realistic electric field in the thunderstorm. This paper proposed a three dimensional (3D) electric field system for atmospheric electric field measurement, which is capable of three orthogonal directions in X, Y, Z, measuring. By analyzing the relationship between the electric field and the relative permittivity of ground surface, the permittivity is calculated, and an efficiency 3D measurement model is derived. On this basis, a three-dimensional electric field sensor and a permittivity sensor are adopted to detect the spatial electric field. Moreover, the elevation and azimuth of the detected target are calculated, which reveal the location information of the target. Experimental results show that the proposed 3D electric field meter has satisfactory sensitivity to the three components of electric field. Additionally, several observation results in the fair and thunderstorm weather have been presented.

• 대한전자공학회논문지SD
• /
• 제42권6호
• /
• pp.23-30
• /
• 2005

본 논문에서는 다양한 에미터 금속 재료를 이용하여 산화된 다공질 폴리실리콘(Oxidized Porous Poly-Silicon) 전계방출 소자를 제조하였으며 에미터 금속의 열처리 효과가 산화된 다공질 폴리실리콘 전계방출소자의 특성에 미치는 영향을 조사하였다. 다양한 에미터 금속 중 구동전극을 가진 Pt/Ti 에미터 전극을 $300^{\circ}C$-1hr 열처리한 경우 전자방출 효율은 $V_{ps}$=12 V에서 최대 $2.98\%$의 효율을 나타내었으며, $350^{\circ}C$-1hr 열처리한 경우 $V_{ps}$=16V에서 $3.37\%$의 가장 높은 효율을 나타내었다. 이는 열처리 공정을 통해 OPPS 전계방출 소자 표면에 다수의 결정립 경계와 무수히 많은 미세한 다공질 간의 흡착성의 개선으로 인한 면 저항 감소에 의한 것을 알 수 있다. OPPS 전계 방출 소자를 디스플레이소자로 적용하기 위해 형광체 발광 특성을 조사해 본 결과, $900^{\circ}C$-50min 산화 후 Pt/Ti(5nm/2nm) 에미터 전극을 사용하여 제조된 OPPS 전계 방출 소자의 경우 15 V에서 3600 cd/$m^2$, 20 V에서 6260 cd/$m^2$의 상대적으로 높은 휘도를 나타내었다. 열처리는 Ti층과 OPPS 간의 흡착성을 개선시키고 에미터 전극에 고른 전계를 가하는 중요한 역할을 한다.

• 소성∙가공
• /
• 제8권4호
• /
• pp.364-373
• /
• 1999

For material characterization of semi-solid materials, backward extrusion process, which has been used in forming of hollow-sectioned products, was analyzed by the upper bound analysis in the current study. The existing kinematically admissible velocity field was applied to steady state at which there was no change in the assumed regions of velocity field. For unsteady state, new velocity field, as a function of dead zone angle, was proposed. Through the whole analysis, fiction between die and workpiece was also considered. It has been studied how the process variables, such as friction factor and punch velocity, and material parameters, such as strength coefficient, strain rate sensitivity could affect on analysis results. Finally, by the comparison with the finite element analysis, the reliability and efficiency of the proposed velocity field were discussed.

• Structural Engineering and Mechanics
• /
• 제62권4호
• /
• pp.497-506
• /
• 2017

A low damage self-centering braced frame equipped with post-tensioning strands is capable of directing damage to replaceable butterfly-shaped fuses. This paper investigates the seismic performance of rocking braced frame under near-field pulse-like ground motions compared to far-field records. A non-linear time history analysis is performed for twelve self-centering archetypes. A sensitivity analysis is carried out to examine the influences of ground motion types and modeling parameters. Findings represent the proper efficiency of the self-centering system under both far-field and near-field pulse-like ground motions.

• Membrane and Water Treatment
• /
• 제11권2호
• /
• pp.141-149
• /
• 2020

Prechlorination could increase the removal efficiency of Synedra, but there was no significant effect of increasing the amount of chlorine added. However, a removal efficiency of greater than 80% was noted when ozone was injected at concentrations greater than 2 mg/L. Also, it was found that on addition of polyamine, a removal efficiency of 80% or more could be achieved. As a result of the analysis of field operation data from the water treatment plants G and B, it was found that at water treatment plant G, the filter run time decreased to 10 hours or less when only coagulant was injected, but the filter run time increased to around 40 hours when polyamine (3 mg/L) was also injected. The Synedra population in the raw water subsequently increased to 2,340 cells/mL, and the filter continued running for more than 20 hours. At water treatment plant B, the average Synedra removal efficiency was 56% when only coagulant was injected, and the filter run time decreased drastically with the increasing population of Synedra in the raw water. However, the removal efficiency of Synedra reached 79% when polyamine was injected together with the coagulant, 90% when ozone was also injected, and 95% when polyamine and ozone were injected together and the filter continued running for over 50 hours. The filter run time was maintained at 60 hours when a Synedra population of 6,890 cells/mL flowed into the Paldang water source, but the filter run time with Synedra at 1,960 cells/mL decreased rapidly from 65 hours to 35 hours when the ratio of the size of the individual Synedra reaching 250 ㎛ or more, increased from 38% to 94%. Therefore, the size of the Synedra is considered to be a factor that significantly influences filter clogging, as well as the size of the Synedra population.

• 조명전기설비학회논문지
• /
• 제26권12호
• /
• pp.9-20
• /
• 2012

This paper proposes the efficiency optimization control of interior permanent magnet synchronous motor(IPMSM) drive using series connected-fuzzy neural network PI(SC-FNPI) controller. The PI controller is generally used to control IPMSM drive in industrial field. However, the PI controller has problem which is falling control performance about parameter variation such as command speed, load torque and inertia due to fixed gain of PI controller. Therefore, to improve performance of PI controller, this paper proposes SC-FNPI controller adjusted input of PI controller by FNN controller according to operating conditions. Also, this paper proposes efficiency optimization control which is improving efficiency with minimize loss. The SC-FNPI controller proposed in this paper is compared control performance with conventional FNN and PI controller about command speed, load torque and inertia variation. And the efficiency optimization control is compared with $i_d=0$ control about loss and efficiency. The SC-FNPI controller proposed in this paper shows more excellent control performance for rising time, overshoot and steady-state error. Also efficiency optimization control is increased efficiency by reducing loss.

• 한국조리학회:학술대회논문집
• /
• 한국조리학회 2006년도 제41차 정기하계학술세미나
• /
• pp.5-20
• /
• 2006

The purpose of this study is to understand how to activate field training internships through former researches relation to training internships thesis. The concept of field training is the same as work experience education. Students have experienced the skills of a practical job in the tourism industry. And also could enhance acquisition of professional theories. According to domestic former researches, The students participated in hotel field practice hardly satisfied with internships because unreasonable duties, burden and circumstances regardless of efficiency of school curriculum. And also they are showing dissatisfaction with compensation. However, Foreign study only on focus on communication between hotel and school. Finally, In order to activate industrial field training internships, School and hotel have more delicate harmonization to improve training internships problem.

• Transactions on Electrical and Electronic Materials
• /
• 제17권1호
• /
• pp.50-55
• /
• 2016

In this paper, we have analyzed the electrical characteristics of 1200V trench gate field stop IGBT and have compared to NPT planar type IGBT and NPT planar field stop IGBT. As a result of analyzing, we obtained superior electrical characteristics of trench gate field stop IGBT than conventional IGBT. To begin with, the breakdown voltage characteristic was showed 1,460 V and on state voltage drop was showed 0.7 V. We obtained 3.5 V threshold voltage, too. To use these results, we have extracted optimal design and process parameter and designed trench gate field stop IGBT. The designed trench gate IGBT will use to inverter of renewable energy and automotive industry.

• 전기학회논문지
• /
• 제67권6호
• /
• pp.730-737
• /
• 2018

This paper aims to design of a double stator axial field 12/10 SRM. Conventional and single stator axial field SRMs were reviewed to apply for automotive cooling fan. The axial field SRM has the advantage of shorter flux path, higher torque per volume and lower iron loss. However, there is axial eccentricity in single stator axial field SRM due to one side excitation. Therefore, a double stator type is designed in this paper to reduce the axial eccentricity. And the trapezoidal pole shape of the stator increases the flow of magnetic flux from stator to rotor and the torque region. The torque and efficiency are compared and tested with experiments.

• 동력기계공학회지
• /
• 제21권4호
• /
• pp.26-33
• /
• 2017

In this paper, we developed a control algorithm to maximize the cleaning performance and the cleaning efficiency of the underwater cleaning robot platform which has been developed for various cistern environment in the industrial field. Through these research and development, we have presented the operation and application of underwater cleaning robots that have been developed, and contributed to commercialization. Finally, this results were verified the effectiveness through actual field experiments.