• 한국광학회지
• /
• 제4권3호
• /
• pp.323-329
• /
• 1993

본 논문에서는 광굴절 특성을 나타내는 파라메타중 회절효율의 전도도비(${\sigma}_d$/{\sigma}_p$) 의존성에 관해 연구 하였다. 전도도비는 입사빔의 세기에 의존하며, 암전도도 ${\sigma}_d$가 광전도도 ${\sigma}_p$ 에 비해 무시할 수 없을 때 입사빔의 세기에 따라 전도도비가 변화되고, 전도도비의 변화는 결정 내의 정전기장에 영향을 주게 된다. 정전기장의 변화는 전기광학효과에 의해 굴절율을 변화시키고, 굴절율의 변화는 회절효율과 관계한다. 개방회로 상태에서 0.1%/mole $Fe:LiNbO_3$ 결정과 $LiNbO_3$ 웨이퍼에 Fe를 증착시킨 LiNb$O_3$에서 두 입사빔의 세기비와 입사빔세기의 합을 다르게 할 때 회절효율을 측정하고 이론값과 비교하였다.

• 한국자기학회지
• /
• 제7권1호
• /
• pp.1-6
• /
• 1997

비정질 Fe$_{78}$B$_{13}$Si$_{9}$의 자기 임피던스 효과를 측정하였다. 자기 임피던스 효과는 자성체 시료의 임피던스가 시료에 걸어준 자기장에 따라서 달라지는 현상이다. MIR(Magneto-Impedance Ratios)은 .DELTA. .ZETA. / .ZETA. .iden. [ .ZETA. (0) / .ZETA. ( $H_{s}$ )]-1로 정의되며, $H_{s}$ 는 시료 방향으로 자기장을 가하여 임피던스가 포화될 때의 자기장의 세기이다. 본 시료의 MIR값은 진공중에서 열처리하였을 때 일반적으로 감소하였으며, 5 MHz를 걸어준 상태에서 열처리를 할 때 58% 이상 증가하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권4호
• /
• pp.26-30
• /
• 2014

We investigate the upper critical field anisotropy ${\Gamma}_H$ and the magnetic penetration depth anisotropy ${\Gamma}_{\lambda}$ of a high-quality $FeSe_{1-x}$ single crystal using angular dependent resistivity and torque magnetometry up to 14 T. High quality single crystals of $FeSe_{1-x}$ were successfully grown using $KCl-AlCl_3$ flux method, which shows a sharp superconducting transition at $T_C{\sim}9K$ and a high residual resistivity ratio of ~ 25. We found that the anisotropy ${\Gamma}_H$ near $T_C$ is a factor of two larger than found in the poor-quality crystals, indicating anisotropic 3D superconductivity of $FeSe_{1-x}$. Similar to the 1111-type Fe pnictides, the anisotropies ${\Gamma}_{\lambda}$ and ${\Gamma}_H$ show distinct temperature dependence; ${\Gamma}_H$ decreases but ${\Gamma}_{\lambda}$ increases with lowering temperature. These behaviors can be attributed to multi-band superconductivity, but different from the case of $MgB_2$. Our findings suggest that the opposite temperature dependence of ${\Gamma}_{\lambda}$ and ${\Gamma}_H$ is the common properties of Fe-based superconductors.

• 한국세라믹학회지
• /
• 제34권8호
• /
• pp.877-885
• /
• 1997

The dependence of strength, crack growth, fracture mode and degree of domain rearrangement of PZT ceramics on poling strength were studied. The PZT [(Pb0.94Sr0.06)(Zr0.46Ti0.54)O3+Nb(trace)] specimens were poled at 0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0 kv/mm, and the strength of the specimens was measured by 3 point flexure system. The bending strength of the specimen decreased in different modes according to the bending directions; xz, zx and yz plane direction with x axis of the poling direction in Cartesian coordinate system. The strength differences between the directions increased as the poling strength increased. The fracture mode transferred to intergranular fracture mode from transgranular one as the poling strength increased. The mechanical breakdown occurred when the poling strength higher than 3 kV/mm was applied to the specimen. It was observed that the crack length increased in the normal direction to the poling direction, however, decreased in the parallel direction to the poling direction when the poled PZT specimen was indented by the Vickers indenter. However, the crack produced by indentation continuously was continuously increased little by little after indentation on the specimen. The domain rearrangement occurred as the poling strength increased and the domains were rearranged more effectively when the electric field was continuously increased little by little.

• Journal of the Optical Society of Korea
• /
• 제12권2호
• /
• pp.112-117
• /
• 2008

Single-mode propagation conditions of X-ray waveguides are investigated by numerical calculations in order to understand the importance of waveguide design parameters, such as core thickness and the optical constants of waveguide materials, on the transmission and coherence properties of the waveguide. The simulation code for mode analyzing is developed based on a numerical solution of the parabolic wave equation. The initial boundary value problem is solved numerically using a finite-difference scheme based on the Crank-Nicolson scheme. The E-field intensities in a core layer are calculated at an X-ray energy of 8.0 keV for air and beryllium(Be) core waveguides with different cladding layers such as Pt, Au, W, Ni and Si to determine the dependence on waveguide materials. The highest E-field intensity radiated at the exit of the waveguide is obtained from the Pt cladded beryllium core with a thickness of 20 nm. However, the intensity from the air core waveguide with Pt cladding reaches 64% of the Be-Pt waveguide. The dependence on the core thickness, which is the major parameter used to generate a single mode in the waveguide, is investigated for the air-Pt, and Be-Pt waveguides at an X-ray energy of 8.0 keV. The mode profiles at the exit are shown for the single mode at a thickness of up to 20 nm for the air-Pt and the Be-Pt waveguides.

• 경영과학
• /
• 제23권1호
• /
• pp.21-41
• /
• 2006

Given the growing deployment of mobile offices, we need to understand the fectors which affect their successful use and implementation. We in this paper present a parsimonious model which integrates the IS success model and the TAM. The main feature of the model is that it allows one to explore the role of mobility of mobile office systems in determining the level of system usage and dependence. Although the mobility is the key property of any mobile system, there is little research effort exerted to understand how mobility affects the traditional IS factors such as perceived ease of use and usefulness. In addition to the system usage, this model also uses dependence as the dependent variable. This is expected to provide richer understanding of the study context. We collected survey data from 1,614 field service workers of a major domestic electronic company. They use PDAs to retrieve information regarding the specifics of the customer service requests and to report what has been done for each service job. The results from SEM analysis show that mobility improves the perceived ease of use which then leads the field service workers to depend more on the PDA systems. Interestingly enough, however, the workers' satisfaction does not cause more frequent use of the system.

• 한국재료학회지
• /
• 제25권3호
• /
• pp.119-124
• /
• 2015

This paper investigates the change of the percolation threshold in the carbon powder-filled polystyrene matrix composites based on the experimental results of changes in the resistivity and relative permittivity of the carbon powder filling, the electric field dependence of the current, and the critical exponent of conductivity. In this research, the percolation behavior, the critical exponent of resistivity, and electrical conduction mechanism of the carbon powder-filled polystyrene matrix composites are discussed based on a study of the overall change in the resistivity. It was found that the formation of infinite clusters is interrupted by a tunneling gap in the volume fraction of the carbon powder filling, where the change in the resistivity is extremely large. In addition, it was found that the critical exponent of conductivity for the universal law of conductivity is satisfied if the percolation threshold is estimated at the volume fraction of carbon powder where non-ohmic current behavior becomes ohmic. It was considered that the mechanism for changing the gaps between the carbon powder aggregates into ohmic contacts is identical to that of the connecting conducting phases above the percolation threshold in a random resister network system. The electric field dependence is discussed with a tunneling mechanism. It is concluded that the percolation threshold should be defined at this volume fraction (the second transition of resistivity for the carbon powder-filled polystyrene matrix composites) of carbon powder.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.818-821
• /
• 2005

The sound measurement procedures of IEC 61400-11 are applied to field test and evaluation of noise emission from 1.5 MW wind turbine generator (WTG) at Yongdang and 660 kW WTG at Hangwon in Jeju Island. Apparent sound power level, wind speed dependence and third-octave band levels are evaluated for both of WTGs. 1.5 MW WTG at Yongdang is found to emit lower sound power than 660 kW one at Hangwon, which seems to be due to lower rotating speed of the rotor of WTG at Yongdang. Equivalent continuous sound pressure levels (ECSPL) of 660 kW WTG at Hangwon vary more widely with wind speed than those of 1.5 MW WTG at Yongdang. The reason for this is believed to be the fixed blade rotating speed of WTG at Yongdang. One-third octave band analysis of the measured data show that the band components around 400-500 Hz are dominant for 1.5 MW WTG at Yongdang and those around 1K Hz are dominant for 660 kW WTG at Hangwon.

• Journal of Magnetics
• /
• 제18권1호
• /
• pp.5-8
• /
• 2013

The perpendicular magnetic anisotropy of sputtered CoFeB thin films covered by MgO was investigated by vibrating sample magnetometry. Three different $Co_xFe_{80-x}B_{20}$ alloys were studied. Under out-of plane magnetic field, the saturation field was found to increase with increasing the Co content. The magnetization and interface anisotropy energy were obtained for all samples. Both showed a marked dependence on the MgO overlayer thickness. In addition, their variations were found to be non-monotonous as a function of the Co concentration.

• Journal of the Optical Society of Korea
• /
• 제16권4호
• /
• pp.372-380
• /
• 2012

The optical method Digital Speckle Correlation Measurement (DSCM) has been extensively applied due its capability to measure the entire displacement field over a body surface. A formula of displacement measurement errors by the gradient-based DSCM method was derived. The errors were found to explicitly relate to the image grayscale errors consisting of sub-pixel interpolation algorithm errors, image noise, and subset deformation mismatch at each point of the subset. A power-law dependence of the standard deviation of displacement measurement errors on the subset size was established when the subset deformation was rigid body translation and random image noise was dominant and it was confirmed by both the numerical and experimental results. In a gradient-based algorithm the basic assumption is rigid body translation of the interrogated subsets, however, this is in contradiction to the real circumstances where strains exist. Numerical and experimental results also indicated that, subset shape function mismatch was dominant when the order of the assumed subset shape function was lower than that of the actual subset deformation field and the power-law dependence clearly broke down. The power-law relationship further leads to a simple criterion for choosing a suitable subset size, image quality, sub-pixel algorithm, and subset shape function for DSCM.