• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.161-161
• /
• 2023

Bias correction of values is a necessary step in downscaling coarse and systematically biased global climate models for use in local climate change impact studies. In addition to univariate bias correction methods, many multivariate methods which correct multiple variables jointly - each with their own mathematical designs - have been developed recently. While some literature have focused on the inter-comparison of these multivariate bias correction methods, none have focused extensively on the effect of diverse configurations (i.e., different combinations of input variables to be corrected) of climate variables, particularly high-dimensional ones, on the ability of the different methods to remove biases in uni- and multivariate statistics. This study evaluates the impact of three configurations (inter-variable, inter-spatial, and full dimensional dependence configurations) on four state-of-the-art multivariate bias correction methods in a national-scale domain over South Korea using a gridded approach. An inter-comparison framework evaluating the performance of the different combinations of configurations and bias correction methods in adjusting various climate variable statistics was created. Precipitation, maximum, and minimum temperatures were corrected across 306 high-resolution (0.2°) grid cells and were evaluated. Results show improvements in most methods in correcting various statistics when implementing high-dimensional configurations. However, some instabilities were observed, likely tied to the mathematical designs of the methods, informing that some multivariate bias correction methods are incompatible with high-dimensional configurations highlighting the potential for further improvements in the field, as well as the importance of proper selection of the correction method specific to the needs of the user.

• International Journal of Contents
• /
• 제6권2호
• /
• pp.6-9
• /
• 2010

Using symplectic relation and reaction concept, we propose a planar near-field antenna measurement method. A generalized probe compensation equation is deduced to obtain the probe correction formulation. To verify our approach, a reflector antenna with $1{\times}2$ horn array is fabricated and measured in the near-field measurement facility. The near-field measurement results are compared with the physical optics (PO) simulation. The results of measurement and simulation agree very well near to the mainbeam.

• Journal of Power Electronics
• /
• 제10권3호
• /
• pp.300-305
• /
• 2010

This paper presents a two Hall sensor method for rotor angle detection in permanent magnet synchronous motors (PMSM). To minimize the implementation complexity, the system is designed to measure the edge field of permanent magnet pieces. However, there are nonlinearities in the measured values of the edge field. In this work, an angle correction algorithm is proposed, and the improvements in accuracy are verified through experiments. Finally, a field orientation controller is constructed with the proposed angle detection algorithm.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2000년도 KIASC Conference 2000 / 2000년도 학술대회 논문집
• /
• pp.143-146
• /
• 2000

Generally, two methods can be used to correct the undesirable magnetic field of MRI. One is active shimming method and the other is passive shimming. Passive shimming method uses many magnetized shims to correct the field. And it involves hardwared for supporting shim trays and a software to calculate a field map and optimaze the locations of the shims[1]. The software is the most important part of the passive shimming system. We made a prototype of the software and tested it in a virtual situation.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.601-605
• /
• 2009

$180^{\circ}$ 이상의 영역을 획득하는 어안렌즈(fish-eye lens)는 최소의 카메라로 최대 시야각을 확보할 수 있는 장점으로 인해 차량 장착 시도가 늘고 있다. 운전자에게 현실감 있는 영상을 제공하고 센서로 이용하기 위해서는 캘리브레이션을 통해 방사왜곡(radial distortion)에 따른 기하학적인 왜곡 보정이 필요하다. 그런데 차량용 어안렌즈의 경우, 대각선 어안렌즈로 일반 원상 어안렌즈로 촬영한 둥근 화상의 바깥둘레에 내접하는 부분을 잘라낸 직사각형 영상과 같으며, 수직, 수평 화각에 따라 왜곡이 비대칭구조로 설계되었다. 본 논문에서는, 영상의 특징점(feature points)을 이용하여 차량용 어안렌즈에 적합한 카메라 모델 및 캘리브레이션 기법을 소개한다. 캘리브레이션한 결과, 제안한 방법은 화각이 다른 차량용 어안렌즈에도 적용 가능하다.

• 한국정보통신학회논문지
• /
• 제7권4호
• /
• pp.719-724
• /
• 2003

본 논문은 halo doping profile을 갖는 나노구조 LDD MOSFET의 문턱전압에 대하여 연구하였다. 소자의 크기는 일반화된 스켈링 이론을 사용하여 100nm 에서 40m까지 스켈링하였다. Van Dort Quantum Correction Model(QM) 모델을 정전계 스켈링 이론과 정전압 스켈링 이론에 적용하여 문턱전압을 조사하였으며, gate oxide 두께의 변화 따른 direct tunneling current를 조사하였다. 결과적으로 게이트 길이가 감소됨에 따라 문턱전압이 정전계 스켈링에서는 감소하고 정전압 스켈링에서는 증가함을 알았고 direct tunneling current는 gate oxide 두께가 감소함에 따라 증가됨을 알았다. 또한 채널 길이의 감소에 따른 MOSFET의 문턱전압에 대한 roll-off특성을 최소화하기 위하여 일반화된 스켈링에서 $\alpha$값은 거의 1 이여야 함을 알았다.

• 대한의용생체공학회:의공학회지
• /
• 제8권1호
• /
• pp.41-48
• /
• 1987

In estimating the freguency-dependent attenuation coefficient, we analyzed the range-dependent ultrasonic beam and proposed the method of calculating the experimental equation of beam pattern in order to reduce the error on the influence of beam pattern. These experimental equations are divided into the spectral centroid and the spec ural standard deviation slope according to axial propagation length. These are repnesented by the first-order equation in the near field of the beam and the second- order eqLlatlon In the far field. In order to prove the validity of this method, the attenuation coefficients of the non-corrected ease and the corrected case are compared. Using the reflected signal from acryle plate, the attenuation coefficients were estimated by the spectral shift method ann the spectral difference method. The result shows attenuation coeffi talents after correction are better than attenuation coefficients before correction. And this method can be applied In vivo measurement.

• 대한기계학회논문집B
• /
• 제29권7호
• /
• pp.814-819
• /
• 2005

The phase change heat transfer has been applied to the processes of machines as well as of manufacturing. The cycle in a heat exchanger includes the phase change phenomena of coolant for air conditioning, the solidification in casting process makes use of the characteristics of phase change of metal, and the welding also proceeds with melting and solidification. To predict the phase change processes, the experimental and numerical approaches are available. In the case of numerical analysis, the Enthalpy method is most widely applied to the phase change problem, comparing to the other numerical methods, i.e. the Equivalent Specific Heat method and the Temperature Recovery method. It's because that the Enthalpy method is accurate and straightforward. The Enthalpy method does not include any correction step while the correction of final temperature field is inevitable in the Equivalent Specific Heat method and the Temperature Recovery method. When the temperature field is to be used in the calculation, however, there must be converting process from enthalpy to temperature in the calculation scheme of Enthalpy method. In this study, an improved method for the Equivalent Specific Heat method is introduced whose method dose not include the correction steps and takes temperature as an independent variable so that the converting between enthalpy and temperature does not need any more. The improved method is applied to the solidification process of pure metal to see the differences of conventional and improved methods.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.494-497
• /
• 2002

본 논문에서는 halo doping profile을 갖는 나노구조 LDD MOSFET의 문턱전압에 대한 시뮬레이션 결과를 나타내었다. 소자 크기는 generalized scaling을 사용하여 100nm에서 40nm까지 스케일링하였다. Van Dort Quantum Correction Model(QM)을 사용하여 정전계 스케일링과 정전압 스케일링에 대한 문턱 전압과 각각의 게이트 oxide 두께에 대한 direct tunneling 전류를 조사하였다. 게이트 길이가 감소할 때 정전계 스케일링에서는 문턱전압이 감소하고, 정전압 스케일링에서는 문턱전압이 증가하는 것을 알 수 있었고, 게이트 oxide두께가 감소할 때 direct tunneling 전류는 증가함을 알 수 있었다. 감소하는 채널 길이를 갖는 MOSFET 문턱전압에 대한 roll-off 특성을 최소화하기 위해 generalized scaling에서 $\alpha$값은 1에 가깝게 되는 것을 볼 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권3호
• /
• pp.173-180
• /
• 2001

In the past few years, the nondestructive inspection technology has greatly developed due to the increased necessity to gain a complete understanding of the bridge behavior. Especially, the deformations of bridges contain a lot of informations about its health state. By measuring these deformations it is possible to analyze the loading and aging behavior of the structure. However, the current, methods (such as LVDT, dial gage, optical displacement transducer, etc) are often of changeable application on site and have the limitations of installation. In this paper, the classical beam theory was reviewed and the deflections of structure are estimated using measured strain which is easy to acquire. The applicability of this algorithm is verified by laboratory(simple reinforced concrete beam) and field test. By this test, we proposed correction factor to estimate deflection of reinforced concrete beam after cracking, and analyze about the generation of correction factor. Also fiber optic sensors as well as resistive strain gages were installed in the concrete beams to establish the applicability of fiber optic sensors in the field of civil engineering.