• Journal of electromagnetic engineering and science
• /
• 제17권2호
• /
• pp.91-97
• /
• 2017

An accurate and efficient evaluation for hypersingular integrals (HIs), strongly singular integrals (SSIs), and weakly singular integrals (WSIs) plays an essential role in the numerical solutions of 3D electromagnetic scattering problems. We derive analytic formulas for WSIs based on Stokes' theorem, which can be expressed in elementary functions. Several numerical examples are presented to validate these analytic formulas. Then, to show the feasibility of the proposed formulations for numerical methods, these formulations are used with the existing analytical expressions of HIs and SSIs to correct the near-field interaction in an iterative physical optics (IPO) scheme. Using IPO, the scattering caused by a dihedral reflector is analyzed and compared with the results of the method of moments and measurement data.

• 한국의학물리학회지:의학물리
• /
• 제2권1호
• /
• pp.17-28
• /
• 1991

방사선 피폭량을 정확히 측정하는 방법의 하나로 열형광선량계의 각 소자별 보정인자를 구하여 사용하는 방법이 있다. 열형광선량계를 기준 선량계, 제어선량계 및 현장 선량계의 3그룹으로 분류하여, 기준 선량계는 제어 및 현장 선량계의 소자보정인자 산출시에만 사용하며, 소자보정인자 산출을 위해 일부분씩 사용할 때를 제외하고는 안전한 장소에 보관한다. 소자보정인자는 기준 선량계의 반응도 평균치에 대한 각 소자의 반응도 비로서 정의된다. 선량계는 판독 횟수가 증가하거나 손상으로 인해 반응도가 감소하기 때문에 최초 구입할 때 또는 사용중에 소자보정 인자를 주기적으로 재산출하여야 한다. 이 소자보정방법은 새로운 선량계의 판독 오차를 줄이고 사용중인 선량계의 신뢰도를 향상시킬 수 있는 우수한 방법이다. 본 논문에서는 소자보정인자를 산출하기 위한 10가지 단계별 방법을 자세히 소개하였다.

• Investigative Magnetic Resonance Imaging
• /
• 제22권4호
• /
• pp.218-228
• /
• 2018

Purpose: The objective of this study is to determine the effect of physical changes on MR temperature imaging at 7.0T and to examine proton-resonance-frequency related changes of MR phase images and T1 related changes of MR magnitude images, which are obtained for MR thermometry at various magnetic field strengths. Materials and Methods: An MR-compatible capacitive-coupled radio-frequency hyperthermia system was implemented for heating a phantom and swine muscle tissue, which can be used for both 7.0T and 3.0T MRI. To determine the effect of flip angle correction on T1-based MR thermometry, proton resonance frequency, apparent T1, actual flip angle, and T1 images were obtained. For this purpose, three types of imaging sequences are used, namely, T1-weighted fast field echo with variable flip angle method, dual repetition time method, and variable flip angle method with radio-frequency field nonuniformity correction. Results: Signal-to-noise ratio of the proton resonance frequency shift-based temperature images obtained at 7.0T was five-fold higher than that at 3.0T. The T1 value increases with increasing temperature at both 3.0T and 7.0T. However, temperature measurement using apparent T1-based MR thermometry results in bias and error because B1 varies with temperature. After correcting for the effect of B1 changes, our experimental results confirmed that the calculated T1 increases with increasing temperature both at 3.0T and 7.0T. Conclusion: This study suggests that the temperature-induced flip angle variations need to be considered for accurate temperature measurements in T1-based MR thermometry.

• 한국수자원학회논문집
• /
• 제41권7호
• /
• pp.681-692
• /
• 2008

본 연구에서는 자료동화 기법의 가장 간단한 방법이라 할 수 있는 연속수정법(successive correction method)을 이용한 레이더 강우자료와 지상 강우자료의 합성방법에 대한 적용성을 검토하였다. 우선 연속수정법의 적용 시 고려해야 할 사항인 반복계산 횟수 및 영향 반경의 규모를 민감도 분석을 통해 결정하였다. 또한 자료 합성에 대한 정량적인 평가를 위해 밀도 있는 지상 강우자료를 공간분포시켜 실제 강우장을 가정하였다. 최근 자료 합성에 많이 이용되고 있는 co-Kriging을 이용하여 두 자료를 합성하여 연속수정법에 의한 자료 합성 결과를 정량적으로 분석하였다. 그 결과 간단하고 경제적인 자료동화 기법인 연속수정법으로도 co-Kriging을 이용하는 경우의 통계적 특성 및 정확도를 확보할 수 있다는 것을 알 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.92-96
• /
• 2007

Microphone array beamforming method has been recognized as an important aeroacoustic research field and become a standard technique in localizing sound sources. This method also used in flight acoustic measurement, and especially, it is very useful when measure sounds inside the wind tunnel. In measuring sound which is inside the wind tunnel by traditional beamforming method, there are some errors caused by airstream. The speed and the propagation path of the sound changes as it travel through the airstream. This makes the error which the position of sound is changed a little bit to the down stream direction. In this paper, validation test has made about the correction equation for this wind effects of previous researches. And beamforming including shear layer correction was performed about a sound source in the anechoic open-jet windtunnel.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 추계학술발표회 논문집
• /
• pp.194-197
• /
• 1986

In this paper, for the curvature correction on the scanning plane in laser scanning system, aberration correction method using holographic optical element is suggested. Holoens is selected as a type of holographic zone plate which has aberration correction property. And hologram recording condition is analyzed to find fo property. This hololens is implemented by computer-generated hologram technique. Laser scanning system is organized using desinged hololens and scanning properties of this system are investigated. Using this method optical system structure in laser scanning system can be simplified satisfying both scan linearity and field flatness.

• 한국소음진동공학회논문집
• /
• 제18권6호
• /
• pp.612-618
• /
• 2008

Microphone array beamforming method has been recognized as an important aeroacoustic research field and become a standard technique in localizing sound sources. This method also used in flight acoustic measurement, and especially, it is very useful when measure sounds inside the wind tunnel. In measuring sound which is inside the wind tunnel by traditional beamforming method, there are some errors caused by airstream. The speed and the propagation path of the sound changes as it travel through the airstream. This makes the error which the position of sound is changed a little bit to the down stream direction. In this paper, validation test has made about the correction equation for this wind effects of previous researches. And beamforming including shear layer correction was performed about a sound source in the anechoic open-jet wind tunnel.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.271-273
• /
• 2002

Switching power supply are widely used in many industrial field. Power factor correction(PFC) has become an increasingly necessary feature in new power supply designs. The power factor correction circuit using boost converter used in input of power source is studied in this paper. In a boost power factor correction circuit there are two feedback control loops, which are a current feedback loop and a voltage feedback loop. In this paper, it is analyzed regulation performance of output voltage and compensator to improve of transient response that presented at continuous conduction mode(CCM) of boost PFC circuit. The validity of designed boost PFC circuit is confirmed by simulation and experimental results.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1995년도 추계학술대회 학술발표 논문집
• /
• pp.195-202
• /
• 1995

This paper presents the calculating method of optimum correction mass within permissible vibration limits for rotating machinery in two-plane field balancing. Basic technique of this method based on influence coefficient method, is graphic vector composition that the resultant of two influence vectors obtained by trial mass have to be equilibrium with initial vibration vector in the each correction plane. Genetic algorithm which is a search algorithm based on the mechanics of natural selection and natural genetics is used for vector composition, and SUMT method is used to objective function which seeks optimum correction mass for balancing a rotor.

• 전자공학회논문지
• /
• 제49권11호
• /
• pp.74-85
• /
• 2012

본 논문에서는 이종 입체 카메라 시스템의 광학적 특성을 일치화하여 동일한 품질의 입체영상을 생성하는 기술을 제안한다. 이종 입체 카메라의 광학적 특성에는 크게 줌, 심도, 초점이 있으며 이들의 차이는 결과적으로 입체영상의 품질에 영향을 주어 사람의 시각 피로를 발생시키는 요인이 된다. 본 논문에서 제안하는 광학 특성 일치화 기술은 이종 카메라의 줌 영상을 일치한 후 동일 피사체에 대해 초점을 맞추고 심도를 일치화하는 과정으로 이루어진다. 이를 위하여 이종 입체 카메라의 줌 영상의 비교 알고리즘을 통하여 줌 렌즈에 대한 룩업테이블(LUT)을 작성하였다. 그리고 입체 영상의 에지(edge)에서 초점 정보를 추출하여 심도를 일치화하였다. 광학적 특성 일치화 실험을 위하여 직교방식의 리그를 제작하고 서로 다른 사양의 HD급 카메라를 이용하여 입체 카메라 장치를 구성하였다. 줌 일치화 및 심도 일치화에 대한 실험 결과로 시각 피로를 줄일 수 있는 입체 영상 생성이 가능함을 보였다.