• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 추계학술대회 논문집
• /
• pp.10-13
• /
• 2004

The PSP(pressure sensitive paint) technique has recently received a large attention as a new revolutionary optical method to measure absolute pressure distribution on a model surface. The PSP technique can be applied to quantitatively investigate flow structure using a CCD camera and image processing technique. In the static calibration, the luminescent intensity of PSP coatings was measured from 0kPa to 11kPa with 0.5, 1, 2kPa increments. In this study, the low-pressure PSP technique was applied to an oblique impinging jet to measure pressure field variations on the impingement plate with varying angle of an oblique jet. The flow structure over the impingement plate was visualized using a surface tracing method. As a result, the detail pressure field distributions of the oblique low-speed impinging jet were visualized effectively using the PSP technique.

• 한국방사선학회논문지
• /
• 제10권1호
• /
• pp.21-28
• /
• 2016

본 연구에서는 CSI 치료시 Standard Technique과 Simple Technique을 비교하여 조사야 접합부의 고선량(hot spot) 또는 저선량(cold spot)이 발생되는 부위의 체적을 분석하고 이에 따른 방사선 치료 유용성을 평가하고자 한다. 연구 목적에 동의한 환자를 대상으로 CT Simulator를 이용하여 환자의 두개부에서 골반부 까지 영상을 획득하였다. Standard Technique 의 경우 조사야 접합부의 이동을 실시하며 Simple Technique은 접합부에서 조사야를 고정하여 치료계획을 수립 후 분석하였다. 분석결과 Standard Technique의 경우에는 조사야 접합부분에 대한 고선량(hot spot)의 영역이 발생 되었으며, Simple Technique은 Standard 기법 보다 선량이 균등하게 나타났다. Standard Technique 과 Simple Technique의 CI 지수는 각 1.6~3, 1.6~1.87, CN의 경우는 0.32~0.53, 0.46~0.51, HI는 0.11~0.33, 0.2~0.26의 분포를 나타났다. 즉, 인접 조사야가 접합하는 조사야 부분의 선량 분포는 Standard Technique에 비해 균등하게 나타났으며, CI, CN, HI 지수를 비교한 결과 Simple Technique에서 균등한 선량 분포가 나타나 CSI 치료에서 Simple Technique의 적용은 적합하다고 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.997-1004
• /
• 2007

A hybrid technique that combines the advantages of binaural reproduction and sound field reproduction technique is proposed. The concept of HRTF-field, which is defined as the set of HRTFs corresponding to the various head dislocations, enables us to realize virtual source imaging over a wide area. Conventional $2{\times}2$ definition is redefined as a MIMO system composed of multiple control sources and multiple head locations, and HRTF variations corresponding to various head movement are quantified. Through the direct control of HRTF-field, reproduction error induced by head dislocation can be minimized in least-square-error sense, and consequential disturbances on the virtual source image can be reduced within a selected area. Simple lateralization examples are investigated, and the reproduction error of the proposed technique is compared to that of Higher-order Ambisonics.

• International Journal of Advanced Culture Technology
• /
• 제1권1호
• /
• pp.19-22
• /
• 2013

The basic principle of the product manufacturing technology using the 3D printing technique materializes the material including the high molecular substance or plastic and metallic dust, and etc. the product into the laminate additive manufacturing according to the design diagram gradually. It is applied to the various industrial field including the field of food division, field of home appliances, field of medicine, field of mechanical department and construction, etc.. The global development case of 3D printing technique is the next. This study described global technology and market trends. Afterward, 3D printing technique manages the important role when it exceeds the product manufacturing view just and is grafted with the various technology including the biotechnology, nanotechnology, and etc. and it improves the quality of the human life.

• 한국전기전자재료학회논문지
• /
• 제15권7호
• /
• pp.634-639
• /
• 2002

Using laser ablation technique carbon thin films were deposited on Si(100) substrate as a function of substrate temperature. In this study, the surface morphologic, structural and field emission properties of these carbon thin films were investigated using Raman spectroscopy, scanning electron microscopy, and a diode technique, respectively. With increasing of the substrate temperature, the surface morphologies were changed significantly. Moreover, the intensity of D-band and the full width at half maximum of these bands were dependent on substrate temperatures. As the substrate temperature was increased, the field emission properties were improved. As the result, we find that the field emission properties of the films were changed significantly with the substrate temperature and structural features of carbon than films.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.536-542
• /
• 2000

The present paper introduces a new fixed interface component mode synthesizing technique based on the notion of higher-order field-consistency. The present technique employs higher-order residual constraint modes in addition to lower fixed interface normal modes while consistency in matching field variables at the substructure interface is maintained. The present field-consistency approach does not increase the size of the synthesized system even if higher-order residual constraint modes are included. A new field-consistent higher-order synthesis technique is first presented and a numerical example is given to verify the present method.

• 한국소음진동공학회논문집
• /
• 제18권2호
• /
• pp.199-207
• /
• 2008

A hybrid technique that combines the advantages of binaural reproduction and sound field reproduction technique is proposed. The concept of HRTF-field, which is defined as the set of HRTFs corresponding to the various head dislocations, enables us to realize virtual source imaging over a wide area. Conventional binaural($2{\times}2$) reproduction system is redefined as a MIMO system composed of multiple control sources and multiple head locations, and HRTF variations corresponding to various head movement are quantified. Through the direct control of HRTF-field, reproduction error induced by head dislocation can be minimized in least-square-error sense, and consequential disturbances on the virtual source image can be reduced within a selected area. Simple lateralization examples are investigated, and the reproduction error of the proposed technique is compared to that of higher-order Ambisonics.

• 한국해양공학회지
• /
• 제33권5호
• /
• pp.421-426
• /
• 2019

The directivity of an underwater sound source should be measured in an acoustically open field such as a calm sea or lake, or an anechoic water tank facility. However, technical difficulties arise when practically implementing this in open fields. Signal processing-based techniques such as a sound intensity method and near-field acoustic holography have been adopted to overcome the problem, but these are inefficient in terms of acquisition and maintenance costs. This study established a simple directivity estimation technique with data acquisition, filtering, and analysis tools. A numerical simulation based on an acoustic radiosity method showed that the technique is practicable for sound source directivity estimation in a diffused reverberant acoustic field like a reverberant water tank.

• 비파괴검사학회지
• /
• 제24권5호
• /
• pp.532-537
• /
• 2004

전자기장을 유도하는 원리를 기초로 한 새로운 비파괴탐상법인 FEF법을 개발하였다. 이 탐상법은 전자기장을 유도하는 유도선과 이를 감지하는 감지부로 구성되어 있고, 비접촉 방식으로 탐상을 실시한다. 본 연구는 알루미늄합금, 스테인레스강과 인코넬 합금강의 재료에 방전 가공한 결함에 대하여 결함 검출 및 결함 깊이에 대한 평가를 실시하였다. 결함이 없는 영역에서의 측정전압은 lift-off에 의존한다. 결함영역에서 탐촉자가 결함에 가까이 접근할수록 전압은 증가하고, 결함위치에서 최고전압으로 측정되며, 이 최고치는 결함의 깊이에 따라 변화한다. 각 재료에 대한 전압분포 같은 경향으로 측정된다.

• Structural Engineering and Mechanics
• /
• 제17권1호
• /
• pp.113-140
• /
• 2004

A mixed eight-node hexahedral element formulated via the Hu-Washizu principle as well as the field extrapolation technique is presented. The mixed element with only three translational degrees of freedom at each node can provide extremely accurate and reliable performance for popular benchmark problems such as spacial beams, plates, shells as well as general three-dimensional elasticity problems. Numerical calculations also show that when extremely skewed and coarse meshes and nearly incompressible materials are used, the proposed mixed element can still possess excellent behaviour. The mixed formulation starts with introduction of a parallelepiped domain associated with the given general eight-node hexahedral element. Then, the assumed strain field at the nodal level is constructed via the Hu-Washizu variational principle for that associated parallelepiped domain. Finally, the assumed strain field at the nodal level of the given hexahedral element is established by using the field extrapolation technique, and then by using the trilinear shape functions the assumed strain field of the whole element domain is obtained. All matrices involved in establishing the element stiffness matrix can be evaluated analytically and expressed explicitly; however, a 24 by 24 matrix has to be inverted to construct the displacement extrapolation matrix. The proposed hexahedral element satisfies the patch test as long as the element with a shape of parallelepiped.