• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.821-824
• /
• 2005

Probe storage is one of the strong candidates for future mobile storage device since it has potential of recording density over I $Tb/in^2$ with r/w speed over 100 Mbps. It also uses silicon-processing technology that suits the purpose of small form factor. In this paper, write characteristics of resistive probe that can rotate the field direction of PZT by field-induced resistance changes in a small resistive region at the apex of the tip will be presented. Also, the relationship between the size of tip and the available write width is investigated for different source bias conditions. For this study, two-dimensional computer simulation ($SILVACO^{TM}$) was performed. With optimum design, the width of the writing electric field can be smaller than 50nm

• Journal of information and communication convergence engineering
• /
• v.20 no.3
• /
• pp.166-173
• /
• 2022

Recently, studies have been conducted on intelligent transportation systems (ITS) that provide safety and convenience to humans. Systems that compose the ITS adopt architectures that applied the cloud computing which consists of a high-performance general-purpose processor or graphics processing unit. However, an architecture that only used the cloud computing requires a high network bandwidth and consumes much power. Therefore, applying edge computing to ITS is essential for solving these problems. In this paper, we propose an edge artificial intelligence (AI) device based ITS. Edge AI which is applicable to various systems in ITS has been applied to license plate recognition. We implemented edge AI on a field-programmable gate array (FPGA). The accuracy of the edge AI for license plate recognition was 0.94. Finally, we synthesized the edge AI logic with Magnachip/Hynix 180nm CMOS technology and the power consumption measured using the Synopsys's design compiler tool was 482.583mW.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.3
• /
• pp.127-141
• /
• 2014

A Vehicle Tracking System consists of GPS tracking device which fits into the vehicle and captures the GPS location information at regular intervals to a central GIS server, and GIS tracking server providing three major responsibilities: receiving data from the GPS tracking unit, securely storing it, and serving this information on demand of the user. GPS based tracking systems supporting a multi-session processing among RMA, RM, and RCP can make a quick response to various services including other vehicle information between RSU and OBU on demand of the user. In this paper we design RSU lower layers and RCP applications in OBU for a multisession processing simulation and test message processing transactions among RMA-RM and RM-RCP. Furthermore, we implement the additional functions of handling access commands simultaneously on multiple service resources which are appropriate for the experimental testing conditions. In order to make a multi-session processing test, it reads 30 resource data,0002/0001 ~ 0002/0030, in total and then occurs 30 session data transmissions simultaneously. We insert a sequence number field into a special header of dummy data as a corresponding response to check that the messages are received correctly. Thus, we find that GIS service system with a multi-session processing is able to provide additional 30 services in a same speed of screen presentation loading while identifying the number of session processing of Web GIS service, the number of OBU service, and the speed of screen presentation loading by comparing a single session and a multi-session of GIS service system.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.244-246
• /
• 2004

Compared with other transport means, safety and timeliness are the merits of railways. Unexpectedly when accident happens, much time and human strength are required to cope with the accident. And for swift recovery, systematic rehabilitation is needed. Recently using MTS(Moving picture Transmission System), we can perform accident rehabilitation and recording work efficiently. MTS is the device that transmits continuous picture information from accident field to control center. We are developing the appropriate system to railway situation to make use of the existing information communication technology, processing technology of video-tex, super high speed transmission technology through fiber-optic, copper cable and network description of information Technology, etc. If these communication-based can technologies are applied to railway system, railway managers can control the accident by inspecting the picture of accident field and can contribute to the safe train operation and the improvement of railway management. In this paper, we investigate the connecting methods when optical fiber is used for moving picture data transmission of train accidents, and its problems. And, we validate MTS's performance through about 28km section of field test.

• The KIPS Transactions:PartA
• /
• v.15A no.4
• /
• pp.211-216
• /
• 2008

In this paper we fabricated and measured the $0.26{\mu}m$ NMOSFET with wet gate oxide and nitride oxide gate to compare that the charateristics of hot carrier effect, charge to breakdown, transistor Id_Vg curve, charge trapping, and SILC(Stress Induced Leakage Current) using the HP4145 device tester. As a result we find that the characteristics of nitride oxide gate device better than wet gate oxide device, especially hot carrier lifetime(nitride oxide gate device satisfied 30 years, but the lifetime of wet gate oxide was only 0.1 year), variation of Vg, charge to breakdown, electric field simulation and charge trapping etc.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.5
• /
• pp.267-270
• /
• 2014

This paper presents the comparative performance of an adaptive FIR filter for a Delayed LMS algorithm. The delayed error signal was used to obtain a Delayed LMS algorithm to allow efficient pipelining for achieving a small critical path and area efficient implementation. This paper presents hardware efficient results (device utilization parameters) and power consumed. The FPGA families (Artix-7, Virtex-7, and Kintex-7) for a low voltage perspective are shown. The synthesis results showed that the artix-7 CMOS family achieves the lowest power consumption of 1.118 mW with 83.18 % device utilization. Different Precision strategies, such as the speed optimization and power optimization, were imposed to achieve these results. The algorithm was implemented using MATLAB (2013b) and synthesized on the Leonardo spectrum.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.230-231
• /
• 2007

we fabricated a pentacene thin-film transistor with an $Al_2O_3$ layer of ALD as a gate insulator and obtained a device with better electrical characteristics at low operating voltages (below 16V). This device was found to have a field-effect mobility of $0.03cm^2/Vs$, a threshold voltage of -6V, an subthreshold slope of 1 V/decade, and an on/off current ratio of $10^6$.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.4
• /
• pp.245-255
• /
• 2009

Recently, embedded processor systems have been widely used in the field of information communication devices and increased its use range and influence. The embedded systems are offered variety of functions, and its operating systems have been developed to make them easy to repair and maintain. Especially embedded linux is very cheap and provide a lot of equipment drivers. Also we can set up our own system because the source code is opened. In this paper, we describe the implementation of Touch panel and TFT-LCD device driver that are widely used for multimedia application. We designed the system hardware by using Altera Nios II embedded system. And we implemented the device drivers of frame buffer, touch panel and i2s based on uClinux for multimedia application, and tested actual operations of the integrated system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1321-1328
• /
• 2008

The monitoring and controlling systems on middleware for agriculture service instead of pigpen is focused on context-awareness and event-centric structure in this paper. By processing and monitoring context information which obtained from a sensor field, the u-Farm middleware is to promptly provide the response for various queries from agriculture's application service. It allows a device to provide optimal ubiquitous farm environment.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.3
• /
• pp.91-96
• /
• 2015

Recently, the 'mobility' is one of the essential item in the field of IT. This means that 'mobility' are good mediators to get collecting user's behavior and provide freedom of mobility service for user's. This paper is proposed a mobility process orchestration(MPO) model that provide multimedia to various devices. The orchestration model provides the structure and function that can be objectify a physical devices in a user's environment to provide orchestrated service of various devices to user using a concept of MSMP(Multi Source Multi Platform). Also, using the concept of Choreography can be extracted appropriate device of the various media formats for harmonious service.