• 한국광물학회지
• /
• 제28권2호
• /
• pp.165-171
• /
• 2015

부산과 울산의 중심지역에 대해 공기 중의 분진시료를 채취하여, 위상차현미경, 위상차분산현미경, 주사전자현미경 등으로 석면을 분석한 결과, 석면은 검출한계 이하로서 확인되지 않았다. 공기중의 분진시료에는 섬유상물질이 다수 포함되었으나, 이들은 대부분 유기질 섬유인 것으로 나타났다. 무기질 섬유물질로는 암면, 세라믹섬유, 석고 등이 소량 포함되었으며, 비섬유상인 석영, 방해석, 장석등의 광물도 가끔 관찰되었다. 국내의 공기 중 분진의 석면분석은 주로 위상차현미경으로 관찰하는 것으로 규정되어 있으나, 이것만으로는 석면의 식별이 불가능한 것으로 나타났다. 따라서 일본 JIS법과 같이 저온회화 처리 장치에 의한 유기물질 제거 후에 분산염색법으로 석면을 식별하고 계수하는 것이 효율적인 것으로 사료된다.

• 한국결정성장학회지
• /
• 제30권6호
• /
• pp.271-276
• /
• 2020

본 연구에서는 유기 규소 폴리머(organosilicon polymer)인 폴리카보실란(polycarbosilane, PCS)을 사용하여 비정질 탄화규소 블록을 제조를 진행하였다. 다양한 형상의 치밀한 탄화규소 블록은 큐어링된 PCS 미세분말을 일축가압성형기를 통해 2~8 ton 하중을 가한 후 1100℃, 1200℃, 1300℃, 1400℃의 열처리 과정을 거쳐 제조되었으며, 물리적 화학적 특성 분석을 위해 열중량분석기(TGA), 주사전자현미경(SEM), 에너지분광분석법(EDS), 만능시험기(UTM)을 이용하였다, 제조된 탄화규소 성형체는 열분해 온도가 증가함에 따라 SiO와 CO 가스로의 분해가 발생하였고, 비정질의 구조에서 β-SiC 결정입자가 성장함을 보였다. 또한, 밀도와 굴곡강도는 1100℃의 열분해 온도에서 제조된 탄화규소 성형체가 1.9038 g/㎤과 6.189 MPa으로 가장 높았다. 제조된 비정질 탄화규소 블록은 이전에 보고된 마이크로파 도움 발열체와 같이 다른 분야에 적용 가능할 것으로 기대된다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.153.1-153.1
• /
• 2007

• 한국세라믹학회지
• /
• 제56권6호
• /
• pp.583-588
• /
• 2019

Silicon carbide (SiC) fiber mats generate large amounts of heat through microwave interactions and are used as heating elements in rapid heat treatment furnaces. However, SiC fibers cool immediately when the microwave power is turned off. Therefore, ceramic layers are inserted between the SiC fiber layers to improve the heat conservation performance of SiC fiber mats. In this study, we fabricated SiC fiber mat composites (SMCs) with ceramic layers under various pressures. The SMC fabricated under 0.007 kPa showed the lowest heat-generating temperature and deviation because less necking was observed between the materials. On the other hand, the SMC fabricated under 0.375 kPa showed the highest heat-generating temperature of 1532.33℃. The SMCs prepared in this study using ceramic powder not only showed heat-generating temperatures comparable to those of conventional SiC fiber mats but also exhibited excellent heat-preserving ability.

• Fibers and Polymers
• /
• 제5권3호
• /
• pp.198-203
• /
• 2004

Composite films were prepared by casting the solution of polyacrylonitrile (PAN) and single wall nanotube (SWNT) in DMF subsequent to sonication. The SWNTs in the films are well dispersed as ropes with 20-30 nm thickness. Moreover, AFM surface image of the composite film displays an interwoven fibrous structure of nanotubes which may give rise to conductive passways and lead to high conductivity. The polarized Raman spectroscopy is an ideal characterization technique for identification and the orientation study of SWNT. The well-defined G-peak intensity at 1580 $cm^{-1}$shows a dependency on the draw ratio under cross-Nicol. The degree of nanotube orientation in the drawn film was measurable from the sine curve obtained by rotating the drawn film on the plane of cross-Nicol of polarized Raman microscope. The threshold loading of SWNT for electrical conductivity in PAN is found to be lower than 1 wt% in the composite film. The electrical conductivity of the SWNT/PAN composite film decreased with increasing of draw ratio due to the collapse of the interwoven fibrous network of the nanotubes with uniaxial orientation.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.44.1-44.1
• /
• 2010

poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a bacterially derived copolymer produced by fermentation. PHBV has been attractive because of its potential environmental, pharmaceutical and biomedical applications. Recently, the electrospinning technique has been used to fabricate fibrous mat for biomedical applications such as artificial blood vessel, drug release and scaffolds, because this method is simple and easy to get ultrafine polymer fibers. Depending on speed of rotation drum collector, fiber structure was different. In this work, PHBV fiber was aligned by electrospinnning machine. Furthermore, alignment of PHBV fiber mats was given angle such as $45^{\circ}$, $60^{\circ}$ and $90^{\circ}$. The morphology of each aligned PHBV fiber mat was observed by SEM technique. The mechanical property was evaluated depending on alignment angle. Especially, cell attachment ability depending on alignment of PHBV fiber mats was carried out using MG- 63 osteoblast like cells.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 추계학술대회 논문
• /
• pp.161-166
• /
• 1996

In this study behavior of deformation and fracture under static tensile load in friction welded dissimilar materials and necking 0phenomenon occuring at tensile yeilding point were shown. Fibrous zone with view of macroscope and dimple pattren with a view of microscope were observed at shear surface.

• 한국응용과학기술학회지
• /
• 제28권2호
• /
• pp.232-239
• /
• 2011

Fabric fibrous filter has been used in various industrial applications owing to the low cost and wide generality. However, the basic properties of fabric materials often limit the practical utilization including hot gas cleaning. This study attempts to find new coatings of porous fibrous filter media in order to overcome its insufficient thermal resistance and durability. Teflon was one of the plausible chemicals to supplement the vulnerability against frequent external thermal impacts. A foaming agent composed of Teflon and some organic additives was tentatively coated on the glass fiber mat. The present test Teflon foam coated filter was fount to be useful for hot gas cleaning, up to $250^{\circ}C$-$300^{\circ}C$. Close examination using XPS(X-ray Photoelectron Spectroscopy) and Contact angle proved the binding interactions between carbon and fluorine, which implies coating stability. The PTFE/Glass foam coated filter consisted of more than 95% (C-F)n bond, and showed super-hydrophobic with good-oleophobic characteristics. The contact angle of liquid droplets on the filter surface enabled to find the filter wet-ability against liquid water or oil.

• Journal of Microbiology and Biotechnology
• /
• 제24권12호
• /
• pp.1664-1672
• /
• 2014

In this study, a fibrous bed bioreactor (FBB) was used for $\small{D}$-lactic acid ($\small{D}$-LA) production by Sporolactobacillus inulinus Y2-8. Corn flour hydrolyzed with ${\alpha}$-amylase and saccharifying enzyme was used as a cost-efficient and nutrient-rich substrate for $\small{D}$-LA production. A maximal starch conversion rate of 93.78% was obtained. The optimum pH for $\small{D}$-LA production was determined to be 6.5. Ammonia water was determined to be an ideal neutralizing agent, which improved the $\small{D}$-LA production and purification processes. Batch fermentation and fed-batch fermentation, with both free cells and immobilized cells, were compared to highlight the advantages of FBB fermentation. In batch mode, the $\small{D}$-LA production rate of FBB fermentation was 1.62 g/l/h, which was 37.29% higher than that of free-cell fermentation, and the $\small{D}$-LA optical purities of the two fermentation methods were above 99.00%. In fe$\small{D}$-batch mode, the maximum $\small{D}$-LA concentration attained by FBB fermentation was 218.8 g/l, which was 37.67% higher than that of free-cell fermentation. Repeate$\small{D}$-batch fermentation was performed to determine the long-term performance of the FBB system, and the data indicated that the average $\small{D}$-LA production rate was 1.62 g/l/h and the average yield was 0.98 g/g. Thus, hydrolyzed corn flour fermented by S. inulinus Y2-8 in a FBB may be used for improving $\small{D}$-LA fermentation by using ammonia water as the neutralizing agent.

• 대한치과교정학회지
• /
• 제22권3호
• /
• pp.557-578
• /
• 1992

Heat treatment which removes internal stress enhances the mechanical properties of the orthodontic arch wire. The main purpose of this experiment was to investigate the effects of the heat treatment on the mechanical properties of the Elgiloy wire. The Elfiloy wire, 0.016' X 0.022' and 0.018' X 0.025', were heat treated in an electric oven for 5, 10 and 15 minutes at selected temperatures between 300 and $900^{\circ}C$. Tensile strength and load deflection rate were measured to reveal the changes of mechanical property at various conditions, and each specimen was observed under metallurgic microscope. Also to trace the precipitation material due to overheat treatment, a qualitative analysis was carried out with EDS system. It was found that heat treatment at a low temperature caused an increase in the tensile strength and bending resistance, and a maintenance in the fibrous in the tensile strength and bending resistance, and a maintenance in the fibrous structure of both sizes of wire. The changes observed in properties and appearance were probably due to the relief of internal stresses incurred in the metal during cold working. In both sizes of wire the tensile strength and the bending resistance continued to decrease at high temperature, and the fibrous structure continued to disappear then was not observed at $900^{\circ}C$. The carbide precipitation founded in grain boundary at $750^{\circ}C$ probably was other elements carbide (Ni, Co) except Cr. The grain growth was observed at $1100^{\circ}C$. Optimum heat treatment for the 0.016' X 0.022' Elgiloy wire was 10 minutes at $500^{\circ}C$, and for the 0.018' X 0.025' Elgiloy wire it was 5 to 15 minutes at $500^{\circ}C$.