• Restorative Dentistry and Endodontics
• /
• v.12 no.2
• /
• pp.101-108
• /
• 1987

The purpose of this study was to investigate the pulpal responses of dental adhesive resins. A total of 40 cavities of the permanent healthy teeth from 4 dogs were prepared. In the experimental group, the cavities were etched for 1 minute with citric acid and filled with experimental resins (ie. Super-Bond C & B$^{(R)}$). In the control group, the cavities were filled with calcium hydroxide base materials (ie. Dycal$^{(R)}$) without etching. The dogs were sacrificed at one, two, three and four weeks after the time of filling and the specimens were routinely prepared and stained with Hematoxylin-Eosin. The microscopic findings were as follows: Infiltration of inflammatory cells was not observed in both experimental and control groups. Change in the odontoblastic layer was not observed in all control groups but severe swelling was observed in deep dental pulp tissue of the control two and three week cases. Pulp tissue was recovered with plenty of fibrous component in the control four week case and reparative dentin formation was not occurred in all cases. Slight changes of the odontoblastic layer beneath the cavity were observed in the experimental one week case. In experimental two and three week cases, swelling of deep pulp tissue was increased and localized reparative dentin formation was observed. In the experimental four week case, odontoblastic layer was recovered with regular appearance and fibrous component of the pulp was increased, but reparative dentin formation was not evident.

• Coupled systems mechanics
• /
• v.11 no.1
• /
• pp.15-32
• /
• 2022

The comprehensive understanding of the fiber reinforced polymer behavior requires the use of advanced non-destructive testing methods due to its heterogeneous microstructure and anisotropic mechanical proprieties. In addition, the material response under load is strongly associated with manufacturing defects (e.g., voids, inclusions, fiber misalignment, debonds, improper cure and delamination). Such imperfections and microstructures induce various damage mechanisms arising at different scales before macrocracks are formed. The origin of damage phenomena can only be fully understood with the access to underlying microstructural features. This makes X-ray Computed Tomography an appropriate imaging tool to capture changes in the bulk of fibrous materials. Moreover, Digital Volume Correlation (DVC) can be used to measure kinematic fields induced by various loading histories. The correlation technique relies on image contrast induced by microstructures. Fibrous composites can be reinforced by different fiber architectures that may lead to poor natural contrast. Hence, a priori analyses need to be performed to assess the corresponding DVC measurement uncertainties. This study aimed to evaluate measurement resolutions of global and regularized DVC for glass fiber reinforced polymers with different fiber architectures. The measurement uncertainties were evaluated with respect to element size and regularization lengths. Even though FE-based DVC could not reach the recommended displacement uncertainty with low spatial resolution, regularized DVC enabled for the use of fine meshes when applying appropriate regularization.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.181-181
• /
• 2006

We developed a novel method to fabricate a nerve guide conduit (NGC) with the porosity of submicron pore sizes (to prevent fibrous tissue infiltration) and hydrophilicity (for effective oxygen and nutrient permeation) using poly(lactic-co-glycolic acid) (PLGA) and Pluronic F127 by a modified immersion precipitation method designed by our laboratory. It was recognized that the hydrophilized PLGA/F127 (3 wt%) tube can be a good candidate as a NGC from the analyses of its morphology, mechanical strength, hydrophilicity, model nutrient permeability and in vivo nerve regeneration behavior using a rat model.

• Journal of Powder Materials
• /
• v.13 no.2 s.55
• /
• pp.108-111
• /
• 2006

Aluminum hydroxides were synthesized by a simple electrolytic reaction of aluminum plates. The aluminum hydroxide, boehmite (AlO(OH)), was predominantly formed in the application of electrical potential at and above 30V, while the mixture of bayerite ($Al(OH)_3$) and boehmite (AlO(OH)) phases were formed below 20V. The boehmite has a clear fibrous structure controlled on nanometer scale. On the contrary, the bayerite consists of the typical hourglass or semi-hourglass shaped coarse crystals as a result of aggregation of various crystals stacked together. The specific surface area of the boehmite nanofiber was markedly high, approaching at about $302\;m^2/g$.

• Carbon letters
• /
• v.8 no.4
• /
• pp.285-291
• /
• 2007

Carbon materials of various morphologies were synthesized by pyrolysis of Soap-nut seeds (Sapindus mukorossi), Jack Fruit seeds (Artocarpus heterophyllus), Date-seeds (Phoenix dactylifera), Neem seeds (Azadirachta indica), Tea leaves (Ehretia microphylla), Bamboo stem (Bambusa bambus) and Coconut fiber (Cocos nucifera), without using any catalyst. Carbon materials thus formed were characterized by SEM XRD and Raman. Carbon thus synthesized varied in size (in ${\mu}m$) but all showed highly porous morphology. These carbon materials were utilized as the anode in Lithium secondary battery. Amongst the various precursors, carbon fibers obtained from Soap-nut seeds (Sapindus mukorossi) and Bamboo stem (Bambusa bambus), even after $100^{th}$ cycles, showed the highest capacity of 130.29 mAh/g and 92.74 mAh/g respectively. Morphology, surface areas and porosity of carbon materials obtained from these precursors were analyzed to provide interpretation for their capacity to intercalate lithium. From the Raman studies it is concluded that graphitic nature of carbon materials assist in the intercalation of lithium. Size of cavity (or pore size of channels type structure) present in carbon materials were found to facilitate the intercalation of lithium.

• Journal of Ceramic Processing Research
• /
• v.19 no.5
• /
• pp.413-418
• /
• 2018

All-solid-state lithium batteries (ASSBs) using inorganic sulfide-based solid electrolytes are considered prospective alternatives to existing liquid electrolyte-based batteries owing to benefits such as non-flammability. However, it is difficult to form a favorable solid-solid interface among electrode constituents because all the constituents are solid particles. It is important to form an effective electron conduction network in composite cathode while increasing utilization of active materials and not blocking the lithium ion path, resulting in excellent cell performance. In this study, a mixture of fibrous VGCF and spherical nano-sized Super P was used to improve rate performance by fabricating valid conduction paths in composite cathodes. Then, composite cathodes of ASSBs containing 70% and 80% active materials ($LiNi_{0.6}Co_{0.2}Mn_{0.2}O_2$) were prepared by a solution-based process to achieve uniform dispersion of the electrode components in the slurry. We investigated the influence of binary carbon additives in the cathode of all-solid-state batteries to improve rate performance by constructing an effective electron conduction network.

• The Journal of the Korean bone and joint tumor society
• /
• v.20 no.2
• /
• pp.74-79
• /
• 2014

Purpose: Fibrous dysplasia is related to the mutation of gene encoding the alpha-subunit of a signal-transducing G-protein and has variable clinical course. Operation can be performed to prevent functional disorder or structural deformity. After curettage, autologous bone graft were used to fill the defects after curettage. The aim of this study is to compare the result of autogenous cancellous bone grafting and allogenic bone grafting for fibrous dysplasia. Materials and Methods: Among the patients who visit our hospital during the period of April, 1997 to October, 2013, we selected 34 patients who diagnosed fibrous dysplasia and visited our clinic over 1 year. There were 13 males and 21 females. Average age was 26.4 (range 2 to 57) years old. Autogenous bone graft (group I) in 5 cases, Non-autogenous bone graft (group II) in 30 cases. Iliac bone is used in all cases of autogenous bone graft. There were no significant difference in age, follow-up period, preoperational laboratory finding between two groups. Radiographic image was done to evaluate the recurrence of fibrous dysplasia or secondary degeneration. Results: There were four cases in recurrence (group I: 1 case, group II: 3 cases, p=0.554). In all recurrent cases, reoperations were done using curettage and autogenous iliac bone graft. There was no re-recurrence after reoperation. One case of secondary aneurysmal bone cyst was confirmed (group II) and 1 cases of pathologic fractures had developed (group I: 0 case, group II: 1 cases, p=0.559). No malignant change occurred. Conclusion: There were no significant difference between autogenous bone graft group and non-autogenous bone graft group. Our result suggested that autogenous bone graft seems to be good method to treat fibrous dysplasia, in the case of small volume of tumor lesion or non-weight bearing portion.

• Korean Journal of Materials Research
• /
• v.15 no.3
• /
• pp.172-176
• /
• 2005

Formation of aluminum hydroxide by a hydrolytic reaction of nano aluminum powder synthesized by a pulsed wire evaporation (PWE) method has been studied. The type and morphology of the hydroxides were investigated with various initial temperatures and pHs. The nano fibrous boehmite (AlOOH) was formed predominantly over $40^{\circ}C$ of the hydrolytic temperature in acid solution, while the bayerite $(Al(OH)_3)$ was formed predominantly below $30^{\circ}C$ in alkali solution with a faceted crystalline structure. As a result the boehmite showed a much larger specific surface area (SSA) than that of bayerite. The highest SSA of the boehmite was about $409\;m^2/g$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.45.1-45.1
• /
• 2010

In this experiment, artificial blood vessel was fabricated from electro-spun PU/PCL. To assist with endothelial growth, PU/PCL surface was coated with the RGD peptide. To prevent a clot of blood, anti-thrombus agent was loaded to the fibrous mat and values were reflected through FT-IR data. In vitro study, SEM and MTT data showed that the component was of excellent biocompatibility and cell proliferation. In in vivo study, the artificial blood vessel was implanted in a dog's artery. The results of the CT scan, ultrasound and H&E staining showed that artificial blood vessel was excellent for artery replacement applications.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.65-74
• /
• 2013

In the manufacture of corrugated box, the fibrous raw materials are mainly consisted of recycled papers, such as KOCC(Korean Old Corrugated Container), kraft sack, and AOCC(American Old Corrugated Container). Among these recycled waste paper, the proportion of KOCC is relatively higher than others in fibrous raw materials. Generally, KOCC shows some poor fiber properties and contains hazardous heavy metal sources. Therefore, it is to evaluate the property of recycled paper sources for eco-friendly corrugated box manufacture. In this study, the physical and mechanical properties of 3 kinds of recycled fibers and their mixed stocks were analyzed. The environmental assessment was also evaluated by analyzing the 4 representative heavy metal contents and evaporation residues in waste papers. As the results, KOCC showed the poorest fiber qualities and had the highest heavy metal contents and evaporation residues among the recycled fibers. Finally, the mechanical strength properties were increased by decreasing KOCC proportion of mixed stock conditions. In addition, the heavy metal contents and evaporation residues were also decreased by increasing recycled AOCC and kraft sack proportion.