• Carbon letters
• /
• 제1권3_4호
• /
• pp.133-137
• /
• 2001

Mesoporous activated carbon fiber (ACF) was prepared from phenolic resin containing a small amount (0.1 wt %) of organic nickel complex through carbonization and steam activation. Microporous ACF as reference sample was also prepared from phenolic resin without agent. In both cases of the mesoporous ACFs and the microporous ACFs, the electric double layer capacitance of the nonaqueous electrolyte (0.5 M $TEABF_4$/PC or 1.0 M $LiClO_4$/PC) was not proportional to the BET specific surface area. This is owing to the low permeability of nonaqueous electrolyte or the low mobility of ion in narrow micropores. However, the mesoporous ACF showed higher double layer capacitance than the microporous (normal) ACF. This result suggests that the presence of many mesopores promotes the formation of effective double layer or the transfer of ion in the micropore.

• Korean Membrane Journal
• /
• 제7권1호
• /
• pp.19-27
• /
• 2005

PP hollow fiber membrane was hydrophilized by EVOH dip coating followed by low temperature plasma treatment and UV irradiation. EVOH coating attained high water flux without any prewetting but its stability did not guaranteed at high water permeation rate. At high water permeation rate, water flux declined gradually due to swelling and delamination of the EVOH coating layer causing pore blocking effect. However, plasma treatment reduces the swelling, which suppress delamination of the EVOH coating layer from PP support result in relieving the flux decline. Also, UV irradiation helped the crosslinking of the EVOH coating layer to enhance the performance at low water permeation rate. FT-IR and ESCA analyses reveal that EVOH dip coating performed homogeneously through not only membrane surface but also matrix. Thermogram of EVOH film modified plasma treatment and W irradiation show that crosslinking density of EVOH layer increased. Chemical modification by plasma treatment and UV irradiation stabilized the hydrophilic coating layer to increase the critical flux of the submerged membrane.

• Journal of the Optical Society of Korea
• /
• 제13권3호
• /
• pp.310-315
• /
• 2009

We report the fabrication of double clad fiber (DCF) and DCF coupler, suitable for fiber based imaging systems requiring the dual-channel transmission. Unlike the conventional DCF which uses silica for both cladding layers, the proposed DCF uses a low-index polymer for its outer-cladding layer coated over the conventional silica inner-cladding layer. The DCF is drawn with a conventional SMF preform but a low-index polymer coating is used for both jacket and outercladding of the fiber. To achieve the cladding mode coupling, a DCF coupler is fabricated by simply twisting two pieces of the proposed DCF after removing the polymer-coating at contacting regions. A cladding mode coupling ratio of 30% was achieved with a contact length of 16 cm. The proposed DCF and DCF coupler were employed in a composite optical coherence tomography (OCT) and fluorescence spectroscopy (FS) system, and both OCT images and FS signal from a plant tissue are measured simultaneously.

• 한국산업융합학회 논문집
• /
• 제26권1호
• /
• pp.201-209
• /
• 2023

Recently, fiber-reinforced composites have been widely used in various industrials fields. In this study, the mechanical behavior, especially fracture behavior, of biomimetic fiber-reinforced composites subjected to pressure loading was analyzed using finite element analysis (FEA). The fiber alignments in the biomimetic composites formed a helicoidal structure, wherein a stacking sequence involved a gradual rotation of each ply in the multi-layered laminated composites. For comparison, cross-ply composite samples with fibers arranged at 0° and 90° were prepared and analyzed. In addition, the mechanical behavior was analyzed based on combinations of the stacking sequence of carbon-fiber composites and glass-fiber composites. The FEA results showed that, when compared with the cross-ply samples, the mechanical properties of the biomimetic composites were considerably improved under pressure loading, which was applied to one side of the composites. Thus, the biomimetic helicoidal structure significantly improved the mechanical properties of the composites. Placing materials having high elasticity and strength in the outermost layers (the layer of the side on which pressure was applied and the opposite side layer) of the composites also significantly contributed to improving the mechanical properties of the composites.

• 한국해양환경ㆍ에너지학회지
• /
• 제16권1호
• /
• pp.53-59
• /
• 2013

1990년대 이후, 중소형 폐 선박으로부터 생성되는 FRP를 재활용하기 위한 방법으로 층상으로 배열된 로빙층과 매트층을 분리하는 것은 친 환경적이면서도 경제적 재활용의 장점을 가지고 있다. 그러나 효율적으로 로빙층과 매트층을 분리하는 기술과 로빙층은 매트층에 비해 얇은 두께로 존재한다는 이유로 인해 로빙층을 매트층과 분리할 때 기계가 자동적으로 층간의 차이를 인식하는 방법은 아직 개발이 이루지지 않고 있다. 본 연구에서는 유리의 구성비가 다른 두 층의 화학적 성질의 차를 이용하여 광학적으로 층간 인식이 가능한 방법을 모색하였다. 또한 다양한 로빙층의 구성에도 자동적으로 절단위치를 분석하는 절단시스템과 최종생산물의 유용성을 확보할 수있는 다양한 크기의 유리섬유를 생산할 수있는 세단기를 개발하였다. 본 연구 결과로 광학적 인식기술과 유연한 절단기술 그리고 다양한 세단기술이 융합된 폐 FRP의 분리 공정의 단순화와 자동화를 달성하게 되었다.

• 한국잠사곤충학회지
• /
• 제18권1호
• /
• pp.21-26
• /
• 1976

각종 고치의 견층부위별 fibroin 효소분해율의 차이 및 견사물성과의 관계를 구명코자 시험하여 다음과 같은 결과를 얻었다. 1. 각종 고치의 견층부위별 fibroin 효소분해율은 외층에서 내층으로 갈수록 높았다. 2. 이상용견의 견층부위별 fibroin 분해율은 정상견에 비하여 높았으며 옥견＞박피견＞사용견＞정견 순위를 보이었다. 3. 원종인 잠111과 잠112의 fibroin 분해율 및 sericin 함유량은 교유종인 잠 111$\times$잠112보다 높았다. 4. 인공사료육잠견의 견층부위별 fibroin의 분해율은 외층보다 내층으로 갈수록 증가되었으며 sericin 함양은 외층에서 내층으로 갈수록 감소되었으나 최내층에서 약간 증가되는 경향을 보이었다. 5. 견층부위별 연편사의 절단강력은 외층에서 내층으로 갈수록 감소되는 경향이었고 이상용견의 절단강역은 정견에 비하여 저하되었다. 6. 견층부위별 fibroin 분해율과 견사의 절단강력과는 부의 상관(${\gamma}$=－0.8)이 인정되고 그 회귀방정식은 y= －0.29x＋5.07 이었다.

• 폴리머
• /
• 제33권5호
• /
• pp.420-428
• /
• 2009

In this study, the composites containing carbon black (CB) or carbon fibers were prepared, and the microwave absorbing properties and the absorption mechanism of them were investigated and discussed in the frequency range of 2-18 GHz, respectively. The optimum mass fraction of CB has been found as 6%, and the carbon fibers were discovered to absorb radar wave either under parallel or vertical polarization, the suitable gap distance between each bundle of which was 5 mm. According to the results of the single constitute absorber samples, the structured composites with the two kinds of absorbers combination were fabricated and studied at 2-18 GHz. The top layer absorbers affect the absorption performance a lot; the maximum reflection loss of composites with CB as top layer absorbers was -31.8 dB with the frequency range of 2.4 GHz below -10 dB, and the other type with CFs as the top layer absorbers obtained the reflection loss peak value of -31.4 dB with 2 GHz below-10 dB.

• Composites Research
• /
• 제17권5호
• /
• pp.15-24
• /
• 2004

유리 섬유 강화 플라스틱 직교적층판의 내부층과 표피층의 길이방향 변형률을 삽입된 절대변형 외부 페브리 페로 간섭 센서를 이용하여 측정하였다. 투과식 광학현미경을 이용하여 삽입된 A-EFPI 센서 주위의 파손거동을 관찰하였다. 시험편 표면부의 변형률 측정을 위해 포일 형식의 스트레인 게이지를 시험편 아래 위 표면부에 부착하였다. 또한 삽입된 A-EFPI 센서로 측정한 내부층과 표피층의 길이방향 변형률 값은 스트레인 게이지로 측정한 시험편 표면의 변형률 값 보다 다소 크게 나타났다. 균일 응력 모델을 기초로 한 3차원 유한요소해석을 통해 실험 결과의 타당성을 확인하였으며 내부층의 큰 변형률은 많은 횡단형 균열의 발생을 야기시켰는데 이로 인해 내부층에 삽입된 광섬유센서의 고장시 변형률이 급격히 낮아졌다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.286-289
• /
• 2004

This paper presents the fatigue characteristics of LIPCA (LIghtweight Piezo-Composite Actuator) device system. The LIPCA device system is composed of a piezoelectric ceramic layer and fiber reinforced lightweight composite layers. Typically a PZT ceramic layer is sandwiched by a top fiber layer with low CTE (coefficient of thermal expansion) and base layers with high CTE. The advantages of the LIPCA design are weight reduction by using the lightweight fiber reinforced plastic layers without compromising the generation of high force and large displacement and design flexibility by selecting the fiber direction and the size of prepreg layers. To predict the degradation of actuation performance of LIPCA due to fatigue, the cyclic electric loading tests using PZT specimens were performed and the strain for a given excitation voltage was measured during the test. The results from the PZT fatigue test were implemented into CLPT (Classical Laminated Plate Theory) model to predict the degradation of LIPCA's actuation displacement. The fatigue characteristic of PZT was measured using a test system composed of a supporting jig, a high voltage power supplier, data acquisition board, PC, and evaluated.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.211-214
• /
• 2000

Filament wound pressure vessels have been studied for the efficient design tool to consider the variation of fiber angles through-the thickness direction. Filament winding patterns were simulated from semi-geodesic fiber path equation to calculate fiber path on arbitrary surface. Finite element analyses were performed considering fiber angle variation in longitudinal and thickness directions by ABAQUS. For the finite element modeling of the pressure tank, the 3-dimensional layered solid element was utilized. From the stress results of pressure tanks, maximum stress criterion in transverse direction was applied to modify material properties for failed region. In the end of each load increment, resultant layer stresses were compared with a failure criterion and properties were reduced to 1/10 for a failed layer. Results of progressive failure analysis were compared with two experimental data.